Representative neutronic characteristics calculations for the VVER-1000 reactors using SRAC and MCNP5

2016 ◽  
Vol 6 (2) ◽  
pp. 21-30
Author(s):  
Huu Tiep Nguyen ◽  
Viet Phu Tran ◽  
Tuan Khai Nguyen ◽  
Vinh Thanh Tran ◽  
Minh Tuan Nguyen
Keyword(s):  
Monte Carlo ◽  
Power Distribution ◽  
Reactor Core ◽  
Multiplication Factor ◽  
Benchmark Problem ◽  
Fuel Assemblies ◽  
Effective Multiplication Factor ◽  
Neutronic Characteristics ◽  
Effective Multiplication ◽  
Good Agreement

This paper presents the results of neutronic calculations using the deterministic and Monte-Carlo methods (the SRAC and MCNP5codes) for the VVER MOX Core Computational Benchmark Specification and the VVER-1000/V392 reactor core. The power distribution and keff value have been calculated for a benchmark problem of VVER core. The results show a good agreement between the SRAC and MCNP5 calculations. Then, neutronic characteristics of VVER-1000/V392 such as power distribution, infinite multiplication factor (k-inf) of the fuel assemblies, effective multiplication factor keff, peaking factor and Doppler coefficient were calculated using the two codes.

A Monte Carlo study on burnup treatment in sodium-cooled reactor with Th fuel

Kerntechnik ◽  
2021 ◽  
Vol 86 (4) ◽  
pp. 302-311
Author(s):  
M. E. Korkmaz ◽  
N. K. Arslan
Keyword(s):  
Monte Carlo ◽  
Cross Sections ◽  
Power Distribution ◽  
Reactor Core ◽  
Monte Carlo Study ◽  
Minor Actinides ◽  
Monte Carlo Code ◽  
Effective Multiplication Factor ◽  
Conceptual Core ◽  
Effective Multiplication

Abstract Sodium Cooled Reactors is one of the Generation-IV plants selected to manage the long-lived minor actinides and to transmute the long-life radioactive elements. This study presents the comparison between two-designed SFR cores with 600 and 800 MWth total heating power. We have analyzed a conceptual core design and nuclear characteristic of SFR. Monte Carlo depletion calculations have been performed to investigate essential characteristics of the SFR core. The core calculations were performed by using the Serpent Monte Carlo code for determining the burnup behavior of the SFR, the power distribution and the effective multiplication factor. The neutronic and burn-up calculations were done by means of Serpent-2 Code with the ENDF-7 cross-sections library. Sodium Cooled Fast Reactor core was taken as the reference core for Th-232 burnup calculations. The results showed that SFR is an important option to deplete the minor actinides as well as for transmutation from Th-232 to U-233.

Analysis of Doppler reactivity of SMART reactor core for hybrid fuel configurations of UO2, MOX and (Th/U)O2 using OpenMC

Kerntechnik ◽  
2021 ◽  
Vol 86 (3) ◽  
pp. 229-235
Author(s):  
Y. Alzahrani ◽  
K. Mehboob ◽  
F. A. Abolaban ◽  
H. Younis
Keyword(s):  
Reactor Core ◽  
Multiplication Factor ◽  
The Core ◽  
Mox Fuel ◽  
The Monte Carlo Method ◽  
Burnable Absorber ◽  
Effective Multiplication Factor ◽  
Reactivity Coefficient ◽  
Increasing Temperature ◽  
Effective Multiplication

Abstract In this study, the Doppler reactivity coefficient has been investigated for UO2, MOX, and (Th/U)O2 fuel types. The calculation has been carried out using the Monte Carlo method ( OpenMC). The effective multiplication factor keff has been evaluated for three materials with four different configurations without Integral Fuel Burnable Absorber (IFBA) rods and soluble boron. The results of MOX fuel, homogenous and heterogeneous thorium fuel configuration has been compared with the core of the reference fuel assembly (UO2). The calculation showed that the effective multiplication factor at 1 000 K was 1.26052, 1.14254, 1.22018 and 1.23771 for reference core, MOX, homogenous and heterogeneous configurations respectively. The results shows that reactivity has decreased with increasing temperature while the doppler reactivity coefficient remained negative. Moreover, the use of (Th/U)O2 homogenous and heterogeneous configuration had shown an improved response compared to the reference core at 600 K and 1 000 K. The doppler reactivity coefficient has been found as –8.98E-3 pcm/K, -0.8 655 pcmK for the homogenous and –8.854 pcm/K, -1.2253 pcm/K for the heterogeneous configuration. However, the pattern remained the same as for the reference core at other temperature points. MOX fuel has shown less response compared to the other fuel configuration because of the high resonance absorption coefficient of Plutonium. This study showed that the SMART reactor could be operated safely with investigated fuel and models.

scholarly journals VALIDATION OF PWR-FUEL CODE FOR STATIC PARAMETERS IN THE LWR CORE BENCHMARK

2018 ◽  
Vol 20 (3) ◽  
pp. 111 ◽  
Author(s):  
Iman Kuntoro ◽  
Surian Pinem ◽  
Tagor Malem Sembiring
Keyword(s):  
Reference Values ◽  
Finite Difference Methods ◽  
Reactor Core ◽  
Maximum Deviation ◽  
Multiplication Factor ◽  
Static Parameter ◽  
Calculation Results ◽  
Effective Multiplication Factor ◽  
Different Characteristics ◽  
Effective Multiplication

The PWR-FUEL code is a multi dimensional, multi group diffusion code with nodal and finite difference methods. The code will be used to calculate the fuel management of PWR reactor core. The result depends on the accuracy of the codes in producing the core effective multiplication factor and power density distribution. The objective of this research is to validate the PWR-FUEL code for those cases. The validation are carried out by benchmarking cores of IAEA-2D, KOERBERG-2D and BIBLIS-2D. The all three cases have different characteristics, thus it will result in a good accuracy benchmarking. The calculation results of effective multiplication factor have a maximum difference of 0.014 %, which is greater than the reference values. For the power peaking factor, the maximum deviation is 1.75 % as compared to the reference values. Those results show that the accuracy of PWR-FUEL in calculating the static parameter of PWR reactor benchmarks are very satisfactory.Keywords: Validation, PWR-FUEL code, static parameter. VALIDASI PROGRAM PWR-FUEL UNTUK PARAMETER STATIK PADA TERAS BENCHMARK LWR. Program PWR-FUEL adalah program difusi multi-dimensi, multi-kelompok dengan metode nodal dan metode beda hingga. Program ini akan digunakan untuk menghitung manajemen bahan bakar teras reaktor PWR. Akurasi manajemen bahan bakar teras PWR tergantung pada akurasi program dalam memprediksi faktor multiplikasi efektif teras dan distribusi rapat daya. Untuk itu dilakukan validasi program PWR-FUEL sebagai tujuan dalam penelitian ini.  Validasi PWR-FUEL dilakukan menggunakan teras benchmark IAEA-2D, KOERBERG-2D dan BIBLIS-2D. Ketiga kasus ini mempunyai karaktristik yang berbeda sehingga akan memberikan hasil benchmark yang akurat. Hasil perhitungan faktor multiplikasi efektif terdapat perbedaan maksimum adalah 0,014 % lebih besar dari referensi. Sedangkan untuk perhitungan faktor puncak daya, terdapat perbedaan maksimum 1,75 % dibanding harga referensi. Hasil perhitungan menunjukkan bahwa akurasi paket program PWR-FUEL dalam menghitung parameter statik benchmark reaktor PWR menunjukkan hasil yang sangat memuaskan.Kata kunci: Validasi, program PWR-FUEL, parameter statik

Cross Sections Influence on Monte Carlo Based Burnup Codes

2014 ◽  
Author(s):  
Davide Chersola ◽  
Guglielmo Lomonaco ◽  
Guido Mazzini
Keyword(s):  
Monte Carlo ◽  
Cross Sections ◽  
Multiplication Factor ◽  
Effective Multiplication Factor ◽  
Effective Multiplication

This paper reports the results of a comparison among JEFF and ENDF/B datasets when used by SERPENT and MONTEBURNS codes on a GFR-like configuration. Particularly, it shows a comparison between the two Monte Carlo based codes, each one adopting three different cross sections dataset, namely JEFF-3.1, JEFF-3.1.2 and ENDF/B-VII.1. Calculations have been carried out on the Allegro reactor, i.e. an experimental GFR-like facility that should be built in EU as GFR demonstrator. Results concern nuclear parameters as effective multiplication factor and fluxes, as well as the atomic densities for some important nuclides versus burnup.

Spent Fuel Canister Criticality Safety Calculation in Groundwater Immersion Accident

2014 ◽  
Author(s):  
Siyuan Wu ◽  
Bo Yang ◽  
Hexi Wu ◽  
Qianglin Wei ◽  
Yibao Liu
Keyword(s):  
Safety Issue ◽  
Multiplication Factor ◽  
Spent Fuel ◽  
Safety Standard ◽  
Fuel Assemblies ◽  
Calculation Results ◽  
Computer Codes ◽  
Effective Multiplication Factor ◽  
Effective Multiplication ◽  
Criticality Safety

This paper studies the KBS-3 spent fuel canister criticality safety issue in the event of a groundwater penetration accident. First, the study calculates the composition of the PWR spent fuel assemblies by using MCBURN software, and the coupling of the MCNP and ORIGEN 2.1 computer codes. Then, with the help of Isotope Generation and Depletion Code, it calculates the composition of various types of actinides and their daughters for 100,000 years. Finally, the above calculation results are used in MCNP5 to calculate the effective multiplication factor keff of the canister for different degrees of groundwater penetration. The study finds that the maximum keff of the canister is 0.79609 in groundwater penetration accident, satisfying criticality safety standard.

Determination of βeff for ININ's TRIGA Reactor

2020 ◽  
Vol 6 (3) ◽  
Author(s):  
J. Galicia-Aragón ◽  
R. Raya-Arredondo ◽  
H. S. Cruz-Galindo
Keyword(s):  
Fuel Element ◽  
Reactor Core ◽  
Operation Time ◽  
Multiplication Factor ◽  
Time Period ◽  
Positive Reactivity ◽  
Training Research ◽  
Effective Multiplication Factor ◽  
Effective Multiplication

Abstract The value of βeff for Training Research Isotopes of General Atomics (TRIGA) Mark III reactor, belonging to the National Institute of Nuclear Researches (ININ), is reported. The TRIGA Mark III reactor core was simulated with MCNP6 to deduce the effective multiplication factor (keff) for critical state and after a small insertion of positive reactivity (∼0.20 $). To perform more realistic simulations, we had to incorporate in the composition of the low-enrichment uranium (LEU) fuel element the produced poisons in a time period of six years, considering the operation time in days, during which the reactor was operating at maximum power (1 MWth). The calculation of the βeff value was obtained with the keff results, calculated with the code, and the reactor periods measured experimentally. We also obtained directly the βeff value, through the card of MCNP6 to calculate keff (KOPTS) card of the MCNP6 code in order to compare both values.

Cross-Section Influence on Monte Carlo-Based Burn-Up Codes Applied to a GFR-Like Configuration

2015 ◽  
Vol 1 (3) ◽  
Author(s):  
Davide Chersola ◽  
Guglielmo Lomonaco ◽  
Guido Mazzini
Keyword(s):  
European Union ◽  
Monte Carlo ◽  
Cross Section ◽  
Data Sets ◽  
Multiplication Factor ◽  
The European Union ◽  
Cross Section Data ◽  
Section Data ◽  
Effective Multiplication Factor ◽  
Effective Multiplication

This paper reports the results of a comparison among JEFF and ENDF/B data sets when used by SERPENT and MONTEBURNS codes on a gas-cooled fast reactor (GFR)-like configuration. Particularly, it shows a comparison between the two Monte Carlo-based codes, each one adopting three different cross-section data sets, namely, JEFF-3.1, JEFF-3.1.2, and ENDF/B-VII.1. Calculations have been carried out on the Allegro reactor, i.e., an experimental GFR-like facility that could be built in the European Union as a GFR demonstration. Results include nuclear parameters, such as the effective multiplication factor and fluxes, as well as the atomic densities for some important nuclides versus burn-up.

scholarly journals Calculation of critical core configurations of a research reactor using MTR, IRT-4M, VVR-KN fuel assemblies

2021 ◽  
Vol 8 (2) ◽  
pp. 10-18
Author(s):  
Quoc Duong Tran ◽  
Nhi Dien Nguyen ◽  
Ton Nghiem Huynh ◽  
Kien Cuong Nguyen ◽  
Minh Tuan Nguyen
Keyword(s):  
Power Distribution ◽  
Flux Distribution ◽  
Research Reactor ◽  
Reactor Core ◽  
Fuel Loading ◽  
Neutron Spectra ◽  
Fuel Assemblies ◽  
Calculation Results ◽  
Effective Multiplication ◽  
Irradiation Facilities

This paper presents calculation results to determine critical core configurations and aminimum number of fuel assemblies (FAs) or uranium mass of a research reactor loaded with three types of FAs such as MTR, IRT-4M and VVR-KN. The MCNP5 code and ENDF/B7.1 library were applied to estimate characteristics parameters of the fuel types and the whole core. Infinitive multiplication factor kinf, neutron flux distribution and neutron spectra of the fuels were calculated. The reactor core configurations with three fuel types were modeled in 3-dimensions, and then the effective multiplication factors keff, relative radial power distribution of each configuration were also evaluated. From calculation results, twelve fuel loading schemes were chosen based on lowest uranium mass or smallest number of FAs loaded into the core. In addition, two full core configurations using VVR-KN and MTR FAs and consisting of beryllium reflectors, vertical irradiation facilities, horizontal neutron beam ports, etc. have been proposed for further consideration in thermal hydraulic calculations and safety analysis.

Sign in / Sign up

Export Citation Format

Share Document