scholarly journals Engine Performance and Emission Characteristics of a Direct Injection Diesel Engine Fuelled with 1- Hexanol as a Fuel Additive in Mahua Seed Oil Biodiesel Blends

2017 ◽  
Vol 13 (2) ◽  
Keyword(s):  
Seed Oil ◽  
Methyl Esters ◽  
Engine Performance ◽  
Alternative Fuel ◽  
Fuel Additive ◽  
Emission Characteristics ◽  
Compression Ignition ◽  
Compression Ignition Engine ◽  
Performance And Emission ◽  
Performance And Emissions

The increasing industrialization and motorization of the world has led to a steep rise for the demand of petroleum products. Petroleum based fuels are obtained from limited reserves. In the wake of this situation, there is an urgent need to promote use of alternative fuel which must be technically feasible, economically competitive, environmentally acceptable and readily available. In the present study, Mahua seed oil methyl esters (MSOME) were prepared through transesterification and evaluation of important physico-chemical properties was carried and the properties were found within acceptable limits. A compression ignition engine was fuelled with three blends of MSOME with diesel (10, 20 and 30% on volume basis) and various performance and emission characteristics were evaluated and results compared with baseline data of diesel. The results suggest the BTE was higher for MSOME blends and BSFC, HC and smoke opacity were lower as compared to diesel fuel. This may be attributed to improved combustion for MSOME are oxygenated fuels and have higher cetane number. The values of NOx were found almost nearer for all blends as compared to diesel. Addition of 1-hexanol (Ignition improver) 0.5%, 1% volume ratios to the optimum blend (MSOME30) for evaluating the engine performance and emissions parameters and the main purpose of ignition improver is to improve combustion process and reduction in engine emissions. Finally results shows that performance and emissions have been to justify the potentiality of the mahua seed oil methyl esters as alternative fuel for compression ignition engines without any modifications

Engine performance and emission characteristics of a compression ignition engine fuelled with diesel/dimethoxymethane blends

2005 ◽  
Vol 219 (7) ◽  
pp. 905-914 ◽  
Author(s):  
Y Ren ◽  
Z H Huang ◽  
D M Jiang ◽  
L X Liu ◽  
K Zeng ◽  
...  
Keyword(s):  
Thermal Efficiency ◽  
Mass Fraction ◽  
Volume Fraction ◽  
Engine Performance ◽  
Compression Ignition ◽  
Compression Ignition Engine ◽  
Performance And Emission ◽  
Fuel Blends ◽  
Performance And Emissions ◽  
Combustion Phase

The performance and emissions of a compression ignition engine fuelled with diesel/dimethoxymethane (DMM) blends were studied. The results showed that the engine's thermal efficiency increased and the diesel equivalent brake specific fuel consumption (b.s.f.c.) decreased as the oxygen mass fraction (or DMM mass fraction) of the diesel/DMM blends increased. This change in the diesel/DMM blends was caused by an increased fraction of the premixed combustion phase, an oxygen enrichment, and an improvement in the diffusive combustion phase. A remarkable reduction in the exhaust CO and smoke can be achieved when operating on the diesel/DMM blend. Flat NO x/smoke and thermal efficiency/smoke curves are presented when operating on the diesel/DMM fuel blends, and a simultaneous reduction in both NO x and smoke can be realized at large DMM addition. Thermal efficiency and NO x give the highest value at 2 per cent oxygen mass fraction (or 5 per cent DMM volume fraction) for the combustion of diesel/DMM blends.

Performance and emission characteristics of a stationary direct injection compression ignition engine fuelled with diethyl ether–sapote seed oil methyl ester–diesel blends

Biofuels ◽  
2016 ◽  
Vol 8 (2) ◽  
pp. 297-305 ◽  
Author(s):  
Yashwanth Kutti Pochareddy ◽  
Aditya Krishna Ganeshram ◽  
Homeshwar Machgahe Pyarelal ◽  
Srinivasan Sridharan ◽  
Aravind Asokan ◽  
...  
Keyword(s):  
Methyl Ester ◽  
Diethyl Ether ◽  
Seed Oil ◽  
Direct Injection ◽  
Emission Characteristics ◽  
Compression Ignition ◽  
Compression Ignition Engine ◽  
Performance And Emission

Performance and Emission Investigations of Jatropha and Karanja Biodiesels in a Single-Cylinder Compression-Ignition Engine Using Endoscopic Imaging

2015 ◽  
Vol 138 (1) ◽  
Author(s):  
Gayatri K. Mistri ◽  
Suresh K. Aggarwal ◽  
Douglas Longman ◽  
Avinash K. Agarwal
Keyword(s):  
Cetane Number ◽  
Engine Performance ◽  
Emission Characteristics ◽  
Compression Ignition ◽  
Compression Ignition Engine ◽  
Marginal Lands ◽  
Performance And Emission ◽  
Long Term Storage ◽  
Term Storage

Biofuels produced from nonedible sources that are cultivated on marginal lands represent a viable source of renewable and carbon-neutral energy. In this context, biodiesel obtained from Jatropha and Karanja oil seeds have received significant interest, especially in South Asian subcontinent. Both of these fuels are produced from nonedible plant seeds with high oil content, which can be grown on marginal lands. In this research, we have investigated the performance and emission characteristics of Jatropha and Karanja methyl esters (biodiesel) and their blends with diesel. Another objective is to examine the effect of long-term storage on biodiesel's oxidative stability. The biodiesels were produced at Indian Institute of Technology Kanpur, (IIT Kanpur), India, and the engine experiments were performed in a single cylinder, four-stroke, compression ignition engine at Argonne National Laboratory (ANL), Chicago. An endoscope was used to visualize in-cylinder combustion events and examine the soot distribution. The effects of fuel and start of injection (SOI) on engine performance and emissions were investigated. Results indicated that ignition delay was shorter with biodiesel. Consequently, the cylinder pressure and premixed heat release were higher for diesel compared to biodiesel. Engine performance data for biodiesel (J100, K100) and biodiesel blends (J30, K30) showed an increase in brake thermal efficiency (BTE) (10.9%, 7.6% for biodiesel and blend, respectively), brake specific fuel consumption (BSFC) (13.1% and 5.6%), and nitrogen oxides (NOx) emission (9.8% and 12.9%), and a reduction in brake specific hydrocarbon emission (BSHC) (8.64% and 12.9%), and brake specific CO emission (BSCO) (15.56% and 4.0%). The soot analysis from optical images qualitatively showed that biodiesel and blends produced less soot compared to diesel. The temperature profiles obtained from optical imaging further supported higher NOx in biodiesels and their blends compared to diesel. Additionally, the data indicated that retarding the injection timing leads to higher BSFC, but lower flame temperatures and NOx levels along with higher soot formation for all test fuels. The physicochemical properties such as fatty acid profile, cetane number, and oxygen content in biodiesels support the observed combustion and emission characteristics of the fuels tested in this study. Finally, the effect of long-term storage is found to increase the glycerol content, acid value, and cetane number of the two biodiesels, indicating some oxidation of unsaturated fatty acids in the fuels.

scholarly journals Experimental investigations on performance and emission characteristics of variable speed multi-cylinder compression ignition engine using Diesel/Argemone biodiesel blends

2017 ◽  
Vol 36 (3) ◽  
pp. 535-555 ◽  
Author(s):  
Mandeep Singh ◽  
Surjit Kumar Gandhi ◽  
Sunil Kumar Mahla ◽  
Sarbjot Singh Sandhu
Keyword(s):  
Chemical Properties ◽  
Engine Performance ◽  
Exhaust Emissions ◽  
Mustard Oil ◽  
Experimental Investigations ◽  
Emission Characteristics ◽  
Compression Ignition ◽  
Compression Ignition Engine ◽  
Argemone Mexicana ◽  
Performance And Emission

The present work explores the use of argemone mexicana (non-edible and adulterer to mustard oil) biodiesel in multicylinder compression ignition, indirect injection engine. Argemone Mexicana biodiesel was produced by transesterification process and the important physico-chemical properties of various blends were investigated. Blends of diesel/biodiesel (AB10, AB20, AB30 and AB40) were prepared and used for analysing the engine performance and emission characteristics at varying loads (0, 25, 50 and 75%) and speeds (2500–4000 r/min). The results show improvement in indicated thermal efficiency and indicated specific fuel consumption with increased proportion of biodiesel in diesel, when compared to conventional diesel. In addition, exhaust emissions such as carbon monoxide, unburnt hydrocarbon and smoke opacity were significantly reduced by AOME/diesel blends. The improvement in engine performance and exhaust emissions were observed up to 30% blending of AOME/diesel. Beyond that, higher blend (AB40) showed deterioration in performance characteristics in contrast to AB30 but still better as compared to conventional diesel.

scholarly journals Effect of Nano Particle Addition on the Performance and Emission Characteristics of a Compression Ignition Engine

2019 ◽  
Vol 8 (9) ◽  
pp. 3038-3040
Keyword(s):  
Diesel Fuel ◽  
Internal Combustion Engines ◽  
Fuel Additive ◽  
Emission Characteristics ◽  
Combustion Engines ◽  
Compression Ignition ◽  
Compression Ignition Engine ◽  
Inorganic Nanotubes ◽  
Performance And Emission ◽  
Application Potential

Inorganic nanotubes are attracting the attention of many scientists and investigators, due to their outstanding application potential in different fields. Researches have been performed in the field of internal combustion engines by adding nanoparticles into the diesel fuel and in biodiesel and blends and their effect on overall performance were studied. It is understood that doping of nanoparticles tend to decrease the emission levels from the engines. Owing to that idea, this project is directed to investigate the effect of doping nanoparticle over the performance and emission characteristics of a compression ignition engine. Nanotubes are mixed with diesel fuel as a fuel additive at different compositions that are 25 ppm, 50 ppm, 100 ppm to find the variation in performance and emission characteristics and results indicate that nanoparticle doped fuel shall be used as an alternate fuel without any modifications to engine structure.

Sign in / Sign up

Export Citation Format

Share Document