FORMULATION AND EVALUATION OF SUMATRIPTAN SUCCINATE AND NAPROXEN SODIUM GASTRORETENTIVE (FLOATING) BILAYERED TABLETS

INDIAN DRUGS ◽  
2021 ◽  
Vol 57 (10) ◽  
pp. 30-41
Author(s):  
K. Srinivasa Reddy ◽  
D. Vinay Kumar ◽  
CH. Lakshmi Bharath ◽  
P. Sri Ramya Madhuri
Keyword(s):  
Drug Release ◽  
Naproxen Sodium ◽  
Slow Release ◽  
Fickian Diffusion ◽  
Release Mechanism ◽  
Direct Compression ◽  
Compression Method ◽  
Sumatriptan Succinate ◽  
Rapid Release ◽  
Gastro Retentive

The main aim of the present work was to formulate and evaluate sumatriptan succinate and naproxen sodium gastro retentive(floating) bilayered tablets. Floating bilayer tablets were formulated using direct compression method, it consist of two layers i.e IR layer containing Naproxen and floating CR layer containing sumatriptan. IR2 layer containing 2% concentration of Cross Povidone was found to be optimum and released 99.23% of naproxen in 45min. The optimized floating CR8 layer containing HPMC K 100M in 46% concentration showed 81.21% of drug release at the end of 12h. Among all formulations, IR2 & CR8 provided slow release of sumatriptan over 12h and rapid release of naproxen within 45 min, hence it is considered as an optimum bilayered formulation of sumatriptan and naproxen. The optimised formulation was fitted in the Kinetic models and it follows Korsmeyer-Peppas kinetics and the release mechanism was Case II non- fickian diffusion from these tablets.

DESIGN AND CHARACTERIZATION OF ALFUZOSIN HCL GASTRORETENTIVE FLOATING MATRIX TABLETS EMPLOYING HPMC K 100M

INDIAN DRUGS ◽  
2018 ◽  
Vol 55 (11) ◽  
pp. 71-73
Author(s):  
Ch. Taraka Ramarao ◽  
◽  
J Vijaya Ratna ◽  
R. B. Srinivasa
Keyword(s):  
Drug Release ◽  
Dosage Forms ◽  
Matrix Tablets ◽  
Fickian Diffusion ◽  
Release Mechanism ◽  
Gastric Residence Time ◽  
Drug Release Mechanism ◽  
The Matrix ◽  
Gastro Retentive

The present investigation involves developing gastro retentive drug delivery systems (GFDDS) of alfuzosin HCl using HPMCK100M a is the matrixing agent and floating enhancer. Sodium bicarbonate in the acidic environment reacts with the acid and produces carbon dioxide. The gastro retentive tablets can be formulated to increase the gastric residence time and thereby increase the oral bioavailability. From the drug release study, it was concluded that the AFTB4 formula of HPMC K 100 M matrix tablets gives the controlled release up to 12 hours by showing increased release with floating lag time 24 seconds. Non – Fickian diffusion was the drug release mechanism from the matrix tablets formulated employing HPMC K 100 M. The matrix tablets (AFTB4) formulated employing 40 % HPMC K 100 M are best suited to be used for gastro retentive dosage form of alfuzosin HCl. Finally, it can be concluded that good candidates for the preparation of gastro retentive dosage forms due its gastric stability, gastric absorption and better bioavailability.

scholarly journals FORMULATION AND EVALUATION OF ORAL FAST DISINTEGRATING TABLET OF IBUPROFEN USING TWO SUPER DISINTEGRANTS

2017 ◽  
Vol 9 (4) ◽  
pp. 92
Author(s):  
Hrishav Das Purkayastha ◽  
Bipul Nath
Keyword(s):  
Drug Release ◽  
Magnesium Stearate ◽  
Direct Compression ◽  
Compression Method ◽  
Disintegration Time ◽  
Orally Disintegrating Tablet ◽  
Rapid Release ◽  
Weight Variation ◽  
Fast Disintegrating Tablet

Objective: The aim of the present investigation was to design and evaluate orally disintegrating tablet (ODT) of Ibuprofen, a NSAID drug used for the treatment of arthritis with a view to improve its oral bioavailability. The focus of the current study was to develop ODT of Ibuprofen using super disintegrants for ease of administration and its physicochemical characterization.Methods: Tablets were made from blends by direct compression method. All the ingredients were passed through mesh no. 80. All the ingredients were co-ground in a pestle motor. The resulting blend was lubricated with magnesium stearate and compressed into tablets using the Cadmach single punch (round shaped, 8 mm thick) machine.Results: Physicals parameters of the prepared tablets like Hardness, Weight variation, Friability, thickness, drug content etc. found within the limits. The disintegration time of prepared ODTs was in the range of 45 to 55 seconds. In vitro dispersion time was found to be 22 to 52 seconds which may be attributed to faster uptake of water due to the porous structure formed by super disintegrants. Short disintegration and faster release of ibuprofen were observed with Cross carmellose sodium as compared to sodium starch glycollate.Conclusion: It is concluded that F3 offered the relatively rapid release of Ibuprofen when compared with other formulations. The increase in the concentrations of super disintegrants may lead to increase in the drug release. The formulation prepared with cross carmellose sodium was offered the relatively rapid release of Ibuprofen when compared with other concentrations of both the super disintegrant. 

scholarly journals Formulation and In Vitro Evaluation of Sustained Release Floating Matrix Tablet of Levofloxacin by Direct Compression Method

2019 ◽  
Vol 9 (4-s) ◽  
pp. 398-403
Author(s):  
Nidhi Kumari Pandey ◽  
Sailesh Kumar Ghatuary ◽  
Amit Dubey ◽  
Prabhat Kumar Jain
Keyword(s):  
Drug Release ◽  
Acute Infection ◽  
Methyl Cellulose ◽  
In Vitro Dissolution ◽  
Release Mechanism ◽  
Matrix Tablet ◽  
Direct Compression ◽  
Compression Method ◽  
Weight Variation

The objective of the present work was to develop Gastro retentive dosage forms which would remain in the stomach and upper part or GIT for a prolonged period of time thereby maximizing the drug release at desired site within the time before GRDFs left the stomach and upper part of the GIT, has provoked a great deal of increased interest in the formulation of such drug as floating drug delivery systems. Levofloxacin, (BCS class I) is a fluoroquinolone anti-bacterial agent. The rationale for the formulation of floating matrix tablet are acidic solubility of levofloxacin, residence of Halicobactor pylori mainly in sub region of stomach and the overdosing associated adverse effect due to continuous intake of drug in acute infection. A simple visible spectrophotometric method was employed for the estimation of levofloxacin at 294 nm and Beer’s law is obeyed in the concentration range of 2-10 μg /ml. Floating matrix tablet of levofloxacin was prepared by direct compression method using different polymers like hydroxyl propyl methyl cellulose (HPMC K4) and carbopol 934 as matrix formation polymers, sodium bicarbonate and citric acid was used as gas generating agents. The FTIR spectra of the levofloxacin and other excipients alone and in combination show the compatibility of the drug and excipients. Six formulations of different polymer percentages were formulated (F1-F6). Pre-compression parameters were evaluated. The influence of matrix forming agents and binary mixtures of them on levofloxacin release was investigated. The formulated tablets were characterized by hardness, friability, thickness, weight variation and in vitro drug release. The formulated tablets had acceptable physicochemical characters. The data obtained from the in-vitro dissolution studies of optimized batch F4were fitted in different models. The optimized formulation F4 showed 99.25% drug content and swelling index of 79.85 %. Drug release mechanism was found to be first order kinetics. Levofloxacin floating tablets exhibited increased gastric residence time, there by improved bioavailability and therapeutic effect of the drug.  

scholarly journals Formulation and evaluation of gastro-retentive floating tablets of terbinafine

2020 ◽  
Vol 13 (1) ◽  
pp. 257-266
Author(s):  
Kapil Jalodiya ◽  
Sourabh Jain ◽  
Karunakar Shukla
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Drug Delivery System ◽  
Extended Period ◽  
Direct Compression ◽  
Compression Method ◽  
In Vitro Drug Release ◽  
Floating Tablets ◽  
Gastro Retentive

Gastro-retentive dosage forms enable prolonged and continuous input of the drug to the upper parts of the gastrointestinal tract and improve the bioavailability of medications those are characterized by a narrow absorption window. The purpose of this research was to develop a novel gastro retentive drug delivery system based on direct compression method for sustained delivery of active agent to improve the bioavailability, reduce the number of doses and to increase patient compliance. Gastro retentive floating tablets of terbinafine were prepared by direct compression method using altered concentrations of HPMC K4, HPMC K15 and PVP K30 as polymers. The prepared tablets of terbinafine were evaluated tablet hardness, uniformity of weight, friability, uniformity of content, in vitro buoyancy test, swelling index, in vitro dissolution study and stability study. All the compositions were resulted in adequate Pharmacopoeial limits. Compatibility studies was execution during FTIR shown that there was absence of probable chemical interaction between pure drug and excipients. The varying concentration of gas generating agent and polymers was found to affect on in-vitro drug release and floating lag time. In vitro drug release of floating gastro retentive tablet of terbinafine shown that the formulation F5 was found to be the best formulation as it releases 96.22% terbinafine in a controlled manner for an extended period of time (up to 480 min). The release data was fitted to various mathematical models such as Higuchi, Korsmeyer-Peppas, First order and Zero order to evaluate the kinetics and mechanism of the drug release. Prepared floating tablets of terbinafine may prove to be a potential candidate for safe and effective controlled drug delivery over an extended period of time for gastro retentive drug delivery system.

scholarly journals Formulation development and evaluation of gastroretentive mucoadhesive tablets of glimepiride using natural polymers

2020 ◽  
Vol 10 (4-s) ◽  
pp. 153-159
Author(s):  
Rahul Malasiya ◽  
Tarkeshwar P. Shukla
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Drug Delivery System ◽  
Extended Period ◽  
Direct Compression ◽  
Compression Method ◽  
In Vitro Drug Release ◽  
Mucoadhesive Tablets ◽  
Gastro Retentive

Glimepiride, a third-generation sulfonylurea is poorly soluble anti-diabetic drug. Currently, the use of natural gums and mucilage is of increasing importance in pharmaceutical formulations as valuable drug excipients. Natural plant-based materials are economic, free of side effects, biocompatible and biodegradable. The development of mucoadhesive sustained release drug delivery system is recommended in order to enhance the bioavailability. A mucoadhesive tablets were developed using the natural polymer sodium alginate and gum tragacanth. Mucoadhesion is a complex phenomenon which involves wetting, adsorption and interpenetration of polymer chains. The tablets of glimepiride were prepared by direct compression method. Pre-compression parameters were evaluated. The tablets were evaluated for post-compression parameters such as thickness, hardness, average weight, friability and In vitro release studies. All the compositions were resulted in adequate pharmacopoeial limits. The varying concentration of polymers was found to affect on in-vitro drug release and mucoadhesive strength. In vitro drug release of gastro retentive tablet of glimepiride shown that the formulation F5 was found to be the best formulation as it releases 98.78%.  Glimepiride in a sustain release manner for an extended period of time (up to 12 hrs). The release data was fitted to various mathematical models such as higuchi, korsmeyer-peppas, first order and zero order to evaluate the kinetics and mechanism of the drug release. Prepared tablets of glimepiride may prove to be a potential candidate for safe and effective controlled drug delivery over an extended period of time for gastro retentive drug delivery system. Keywords: Glimepiride, Gastro retentive, Anti-diabetic drug, Direct compression method

scholarly journals Development and Optimization of Gastro-Retentive Formulation of Hydralazine HCl

2016 ◽  
Vol 8 (05) ◽  
Author(s):  
Himanshu Acharya ◽  
Rakesh Patel
Keyword(s):  
Drug Release ◽  
Sodium Bicarbonate ◽  
Methyl Cellulose ◽  
Optimization Procedure ◽  
Fickian Diffusion ◽  
Release Mechanism ◽  
Wet Granulation ◽  
Floating Tablets ◽  
Hydralazine Hydrochloride ◽  
Predicted Values

Hydralazine hydrochloride has a half-life of 2 to 4 hours with an oral bioavailability of 26-50%. Since hydralazine has a demethylating effect on various suppressor genes, it can be used in various types of cancer to support chemotherapy. The purpose of this study was to optimize and evaluate floating tablets of hydralazine hydrochloride designed to prolong the gastric residence time and to provide controlled release of the drug for 24 h. The floating tablets of hydralazine hydrochloride were prepared by the wet granulation method. Polymers of hydroxy propyl methyl cellulose (HPMC K100M), HPMC K15M, carbopol 940 and sodium bicarbonate were used as the release retarding agents. This study investigated utility of a 3-factor, 3-level Box-Behnken design and optimization process for floating tablet of Hydralazine with 5 replicates of center points. Amount of HPMC K4 (Hydroxy Propyl Methyl cellulose), amount of sodium bicarbonate were selected as the independent variables whereas total floating time (TFT), T90, % cumulative drug release at 24 hours, and T20, Q1 were selected as dependent variables. Non-Fickian diffusion release transport was confirmed as the release mechanism for the optimized formulation and the predicted values agreed well with the experimental values. Drug excipient compatibility studies were investigated by FTIR, DSC and XRD. The produced tablets exhibited good floating time and controlled drug release over a period of 24 h. The resultant data were critically analyzed to locate the composition of optimum formulations. All predicted values of response variables of optimized formulation demonstrated close agreement with the experimental data during optimization procedure.

scholarly journals FABRICATION OF NANO CLAY INTERCALATED POLYMERIC MICROBEADS FOR CONTROLLED RELEASE OF CURCUMIN

2021 ◽  
pp. 206-215
Author(s):  
DHARMENDER PALLERLA ◽  
SUMAN BANOTH ◽  
SUNKARI JYOTHI
Keyword(s):  
Drug Release ◽  
In Vitro Release ◽  
Controlled Drug Release ◽  
Fickian Diffusion ◽  
Simulated Gastric Fluid ◽  
Release Mechanism ◽  
Release Studies ◽  
Swelling Studies ◽  
Vitro Release

Objective: The objective of this study was to formulate and evaluate the Curcumin (CUR) encapsulated sodium alginate (SA)/badam gum (BG)/kaolin (KA) microbeads for controlled drug release studies. Methods: The fabricated microbeads were characterized by fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), X-ray diffraction (X-RD), and scanning electron microscopy (SEM). Dynamic swelling studies and in vitro release kinetics were performed in simulated intestinal fluid (pH 7.4) and simulated gastric fluid (pH 1.2) at 37 °C. Results: FTIR confirms the formation of microbeads. DSC studies confirm the polymorphism of CUR in drug loaded microbeads which indicate the molecular level dispersion of the drug in the microbeads. SEM studies confirmed the microbeads are spherical in shape with wrinkled and rough surfaces. XRD studies reveal the molecular dispersion of CUR and the presence of KA in the developed microbeads. In vitro release studies and swelling studies depend on the pH of test media, which might be suitable for intestinal drug delivery. The % of drug release values fit into the Korsmeyer-Peppas equation and n values are obtained in the range of 0.577-0.664, which indicates that the developed microbeads follow the non-Fickian diffusion drug release mechanism. Conclusion: The results concluded that the CUR encapsulated microbeads are potentially good carriers for controlled drug release studies.

scholarly journals Effect of Polymers on the Pharmaco-mechanical Properties of Direct Compressed Tablets with Ketoprofen

2019 ◽  
Vol 56 (1) ◽  
pp. 239-244
Author(s):  
Monica Iliuta Stamate ◽  
Ciprian Stamate ◽  
Daniel Timofte ◽  
Bogdan Ciuntu ◽  
Carmen Gafitanu ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Drug Release ◽  
Methyl Cellulose ◽  
Physicochemical Characteristics ◽  
Direct Compression ◽  
Mechanical Parameters ◽  
Compression Method ◽  
Drug Substances ◽  
Polymeric Binders ◽  
Made In

In this study, the effect of polymers on the mechanical properties of ketoprofen extended drug release systems were studied. Many polymers are added in formulation of compressed tablets in order to improve the physicochemical characteristics of the drug release system. The samples were made in the form of cylindrical tablet about 9 mm in diameter, containing different mixtures of drug substances and excipients acording to seven formulations. Cylindrical tablets containing mixtures of ketoprofen and various types of polymers are made by direct compression method. Among the binders used were a series of different polymers like Kollidon va 64, hydroxypropyl methyl cellulose and sodium carboxyl methyl cellulose. Mechanical parameters such as hardness, mechanical strenght, friability and roughness were studied in order to determine how they are influenced by polymeric binders.

scholarly journals Novel Gliclazide Electrosprayed Nano-Solid Dispersions: Physicochemical Characterization and Dissolution Evaluation

2019 ◽  
Vol 9 (2) ◽  
pp. 231-240
Author(s):  
Khosro Adibkia ◽  
Solmaz Ghajar ◽  
Karim Osouli-Bostanabad ◽  
Niloufar Balaei ◽  
Shahram Emami ◽  
...  
Keyword(s):  
Drug Release ◽  
Solid Dispersions ◽  
In Vitro Release ◽  
Physicochemical Characterization ◽  
Amorphous State ◽  
Water Soluble ◽  
Fickian Diffusion ◽  
Release Mechanism ◽  
Peg 6000

Purpose: In the current study, electrospraying was directed as a novel alternative approach to improve the physicochemical attributes of gliclazide (GLC), as a poorly water-soluble drug, by creating nanocrystalline/amorphous solid dispersions (ESSs). Methods: ESSs were formulated using Eudragit® RS100 and polyethylene glycol (PEG) 6000 as polymeric carriers at various drug: polymer ratios (i.e. 1:5 and 1:10) with different total solution concentrations of 10, 15, and 20% w/v. Morphological, physicochemical, and in-vitro release characteristics of the developed formulations were assessed. Furthermore, GLC dissolution behaviors from ESSs were fitted to various models in order to realize the drug release mechanism. Results: Field emission scanning electron microscopy analyses revealed that the size and morphology of the ESSs were affected by the drug: polymer ratios and solution concentrations. The polymer ratio augmentation led to increase in the particle size while the solution concentration enhancement yielded in a fiber establishment. Differential scanning calorimetry and powder X-ray diffraction investigations demonstrated that the ESSs were present in an amorphous state. Furthermore, the in vitro drug release studies depicted that the samples prepared employing PEG 6000 as carrier enhanced the dissolution rate and the model that appropriately fitted the release behavior of ESSs was Weibull model, where demonstrating a Fickian diffusion as the leading release mechanism. Fourier-transform infrared spectroscopy results showed a probability of complexation or hydrogen bonding, development between GLC and the polymers in the solid state. Conclusion: Hence the electrospraying system avails the both nanosizing and amorphization advantages, therefore, it can be efficiently applied to formulating of ESSs of BCS Class II drugs.

scholarly journals FORMULATION AND OPTIMIZATION OF LEVAMISOLE CHEWABLE TABLETS

2019 ◽  
pp. 222-228
Author(s):  
PRADIP KUMAR CHAUDHARY ◽  
ABDUL RAHEEM T. ◽  
MANJUNATH U MACHALE ◽  
VASIA ◽  
SHAIK SADIK
Keyword(s):  
Drug Release ◽  
Compatibility Study ◽  
Direct Compression ◽  
Factorial Designs ◽  
Compression Method ◽  
Powder Blend ◽  
Dissolution Studies ◽  
Sodium Starch Glycolate ◽  
Chewable Tablets ◽  
Excipient Compatibility

Objective: The aim of the present study was to prepare and optimize levamisole chewable tablets by using various super disintegrants, namely; sodium starch glycolate, DRC Indion 204, and DRC Indion 234. Methods: Drug excipient compatibility study was carried out by FTIR spectroscopy to verify the compatibility of levamisole with the excipients. Nine batches of levamisole chewable tablets were prepared according to 32 factorial designs using a direct compression method by optimizing the super disintegrant concentration. The powder blend was exposed to pre-compression studies of the powder blend followed by post-compression studies of the formulated tablets. Results: FTIR study revealed that the excipients used in the formulations were compatible with the drug. The pre-compression and post-compression parameters were found within the IP limits. Form the dissolution studies, it was evident that the formulation prepared with DRC Indion 234 (50 mg) showed maximum percentage drug release in 45 min (97.13%) hence it is considered as optimized formulation. When compared to all other formulation, the batches with DRC Indion 234 (F7-F9) showed a better release of the drug (90 % drug release within 45 min). Conclusion: Nine batches of levamisole chewable tablets were successfully formulated by optimizing the concentration of super disintegrants such as sodium starch glycolate, DRC Indion 204, and DRC Indion 234. It was concluded from the dissolution studies that the DRC Indion 234 is the best super disintegrant irrespective of their concentration for the formulation of levamisole chewable tablets when compared to sodium starch Glycolate and DRC Indion 204.

Sign in / Sign up

Export Citation Format

Share Document