About some criterion on the state of oil and gas production process diagnostics

2010 ◽  
pp. 42-49
Author(s):  
A.A. Suleymanov ◽  
◽  
A.A. Abbasov ◽  
Keyword(s):  
Production Process ◽  
Oil And Gas ◽  
Gas Production ◽  
The State ◽  
Oil And Gas Production ◽  
Process Diagnostics

Environmentalism and the Globalization of the Oil Industry in Rio de Janeiro, Brazil

2018 ◽  
Vol 45 (5) ◽  
pp. 186-203 ◽  
Author(s):  
Maria Guadalupe Moog Rodrigues
Keyword(s):  
Rio De Janeiro ◽  
Environmental Governance ◽  
Oil And Gas ◽  
Gas Production ◽  
The State ◽  
Civil Society Organizations ◽  
Longitudinal Case Study ◽  
Oil And Gas Production ◽  
Oil Companies ◽  
Environmental Mobilization

The state of Rio de Janeiro has become a hub for oil and gas production and infrastructure since Brazil entered the global oil market in the 2000s. Observers have anticipated increasing tensions between environmental activists and oil companies. These predictions have not been fulfilled, despite increasing evidence of environmental degradation caused by oil production. What could be hindering environmental mobilization in defense of the environment and affected populations and against the unrestrained expansion of oil infrastructure in the state? A longitudinal case study of environmental activism in defense of the Guanabara Bay ecosystem suggests that answers must consider the combined effects of democratization, political and regulatory decentralization, and neoliberal reforms on socioenvironmental activism—specifically, its weakening as civil society organizations confront increasing burdens of participation in policy making, deeply fragmented institutional and regulatory frameworks for environmental governance, and the expansion of opportunities to engage in collaborative arrangements with corporations. O Estado do Rio de Janeiro tornou-se o centro da infraestrutura e produção de gás e petróleo desde que o Brasil ingressou no mercado internacional de petróleo nos anos 2000. Analistas vêm antecipando crescente tensão entre ativistas ambientais e companhias petrolíferas. Contudo, essas previsões não se concretizaram, não obstante evidência da degradação ambiental que a produção de petróleo vem causando. O que poderia estar impedindo a mobilização em defesa do meio ambiente e populações afetadas, e contra a expansão desmedida da infraestrutura petrolífera no estado? Um estudo de caso longitudinal do ativismo ambiental em defesa dos ecossistemas da Baía de Guanabara sugere que as repostas a essa questão devem considerar os efeitos combinados da democratização, descentralização política e regulatória, e reformas neoliberais no ativismo socioambiental—especificamente, seu enfraquecimento à medida que organizações da sociedade civil confrontam crescentes custos de participação nas políticas públicas, fragmentação de arcabouços regulatórios e institucionais de governança ambiental, e a expansão de oportunidades de engajamento em arranjos colaborativos com corporações.

scholarly journals RISK ASSESSMENT IN OIL AND GAS PRODUCTION

Neft i gaz ◽  
2020 ◽  
Vol 1 (121) ◽  
pp. 95-107
Author(s):  
P.A. TANZHARYKOV ◽  
◽  
U.ZH. SARABEKOVA ◽  
A.E. TULEGEN ◽  
◽  
...  
Keyword(s):  
Occupational Safety ◽  
Oil And Gas ◽  
Raw Materials ◽  
Health And Safety ◽  
Gas Production ◽  
The State ◽  
Risk Indicators ◽  
Production Operation ◽  
Labor Protection ◽  
Oil And Gas Production

It is necessary to carry out work to analyze the harmful factors of accidents during the production, operation and transportation of raw materials in oil and gas fields and assess their compliance with the requirements of the standards of the Republic of Kazakhstan. The main goal of labor protection is to create safe working conditions for employees, as well as to prevent personnel from illnesses. In this regard, it is necessary to have a system of accounting, analysis and assessment of the state of labor protection, as well as management of labor protection. This article proposes ways to quickly assess the state of health and safety at work by calculating a number of occupational risk indicators based on information available in the modules for assessing occupational safety by industrial risk indicators. The efficiency of using the OSH management systems software proposed by the authors is based on a specific task from four main modules "Employees", "Events", "Equipment", "Ecology" and a number of submodules. In addition, this work uses matrix methods for assessing risks in the "Probability or Consequences of an Event" coordinate system, "Elmeri" system, "Fine Kinney" method, "Risks". Modern expert methods are compared and presented under the title "Five stages of assessment"

scholarly journals ANALYSIS OF THE STATE OF SERVICEABILITY IN THE PROCESS OF WEAR OF ELEMENTS DURING THE OPERATION OF OIL AND GAS PRODUCTION EQUIPMENT

2021 ◽  
Vol 08 (04) ◽  
pp. 87-94
Author(s):  
Sevda Aliyeva Sevda Aliyeva
Keyword(s):  
Oil And Gas ◽  
Production Equipment ◽  
Gas Production ◽  
The State ◽  
Structural Elements ◽  
Structural Element ◽  
Oil And Gas Production ◽  
Total Utility ◽  
Generalized Indicator

The generalized indicator of useful use, depending on the state of individual elements of oil-producing equipment, characterizes the ability of this equipment to perform its function during operation at optimal working time. The generalized indicator of the useful use of operational equipment can be described as the calculated sum of the indicator of the useful use of individual equipment elements. If, during operation, the oil-producing equipment retains its operability due to frequent replacement of its structural and non-structural elements, then such operational equipment is considered by users as outdated. Operating equipment can be divided into 6 categories according to the indicators of suitability. The article analyzes the state of useful use of equipment and, as a result, the total utility of equipment is calculated in accordance with the indicators of useful use by category, and graphs of changes in the state of useful use are constructed. Based on the study of the graphs of the useful use of equipment, it was proposed to conduct an analysis in the following areas: • Evaluation of the design and technological perfection of the equipment by users according to important new parameters. • Determination of equipment compliance with wear standards during operation. Keywords: structural element, wear theory, the usefulness of jam, categories, schedule of changes, reliability.

OIL AND GAS INDUSTRY IN WESTERN AUSTRALIA

1999 ◽  
Vol 39 (1) ◽  
pp. 30
Author(s):  
M. Meaton
Keyword(s):  
Western Australia ◽  
Oil And Gas ◽  
Oil And Gas Industry ◽  
Gas Production ◽  
The State ◽  
Full Potential ◽  
Gas Industry ◽  
Oil And Gas Production ◽  
Advantages And Disadvantages ◽  
Petroleum Companies

The oil and gas production sector in Western Australia has grown dramatically in recent years and now represents the largest resource sector in the State economy. The industry has a very promising future but it faces a number of challenges if it is to achieve its full potential. Its production location in remote parts of the State confers both advantages and disadvantages. Chief among the disadvantages is the challenge of convincing the community and government of the benefits from the industry when many of those benefits are not apparent to the majority of the population. The emphasis in this paper is on economic impacts, social benefits and community attitudes.WA has produced about 820 million barrels of oil and 2000 million barrels of natural gas when gas is calculated in energy equivalent terms. Petroleum energy production has increased dramatically over the last 15 years and the State is now a substantial energy exporter. Petroleum sources provide the energy for over 85% of the final energy used in the State. Total industry investment over the last 18 years has been nearly $21,000 million for an average of $3.2 million each day. Direct employment by petroleum companies is around 2,500 people with flow-on employment in the services sector estimated at over 17,000 people. Petroleum companies have been major contributors to government revenue and to the development of remote regions in WA.

Structural Health Monitoring of An Offshore Platform Trend of Corrosion and Marine Growth With Predictive Maintenance

2020 ◽  
Author(s):  
K. S. Suharto
Keyword(s):  
Structural Health Monitoring ◽  
Data Processing ◽  
Production Process ◽  
Health Monitoring ◽  
Oil And Gas ◽  
Gas Production ◽  
Offshore Platform ◽  
Offshore Platforms ◽  
Oil And Gas Production ◽  
Potential Failure

Nowadays, there are a lot of oil and gas exploration activities all over the world, especially offshore. Oil and gas production itself has many supporting factors in the production process, of which one of them is the offshore platform. Over time, the offshore platform will experience a degradation in strength from the initial design, therefore offshore platforms need to carry out appropriate inspection, maintenance and repair (IMR) programs so that the offshore platform does not reach critical conditions and disrupt the oil and gas production process, resulting in significant losses and not achieving the planned production rates. The offshore platform design is a combination of steel structure and other materials, methods, and loads that are initially worked at the port, such as wave loads, currents, and several other parameters such as gravity, wind, and earthquake. Most of the offshore platforms that currently exist (worldwide) were made in the period of oil investment that developed between 1970 and 1980, thus, the platform's age has now reached 40 to 50 years (El-Reedy, 2012). This research data based on a platform in the Makassar strait between the islands of Kalimantan and Sulawesi. The method used in this research is the platform's design, data observation, data analysis, data processing, and statistical multilinear regression analysis. This research is investigating the degradation trend of the offshore platform and predicting the future of potential failure because of corrosion and marine growth. After the platform encounters degradation over several years, it will decrease the service life before the degradation starts to matter. The results show after data processing that, offshore platforms encounter degradation over several years, and it is presented by a graph containing the condition trend over a multi-year condition because of corrosion and marine growth, and its effect towards unity check (UC) that define structure health. Unity check value produced from allowable stress versus capacity. In this research, structural health monitoring is predicting the potential failure of the platform towards its UC effect of corrosion and marine growth, with a max of the UC value is 0.8 because its a critical value. The failure of the structure possibly would have an affect on the cost-effectiveness. Therefore it is necessary to predict when the structure will fail so that the costs used are effective. Unfortunately, there is no core data for the environmental changes every year at the platform, so the model's equation does not include environmental conditions.

scholarly journals OPTIMIZATION OF THE OIL AND GAS PRODUCTION PROCESS IN THE CONCEPT DIGITAL DEPOSITS

2021 ◽  
Vol 1 (1) ◽  
pp. 213-214
Author(s):  
Oleg Arsent'ev ◽  
Dmitriy Ivanov ◽  
Kristina Saharovskaya
Keyword(s):  
Production Process ◽  
Intelligent Systems ◽  
Oil And Gas ◽  
Digital Technologies ◽  
Gas Production ◽  
Oil And Gas Production ◽  
Technological Processes ◽  
Quality Of Products

The possibilities of using digital technologies in oil and gas production within the framework of the "Digital Field" concept are considered, and it is determined that the introduction of intelligent systems in technological processes increases the volume and quality of products while reducing their cost.

Sign in / Sign up

Export Citation Format

Share Document