scholarly journals A New Trend of Digital Healthcare in 3D Printed Medicines

2020 ◽  
Vol 13 (4) ◽  
pp. 12
Author(s):  
Itimad Raheem Ali ◽  
Jwan K. Alwan ◽  
Dhulfiqar Saad Jaafar ◽  
Hoshang Kolivand
Keyword(s):  
Drug Design ◽  
Digital Health ◽  
Pharmaceutical Research ◽  
Three Dimensional ◽  
Medical Applications ◽  
Future Developments ◽  
Deposition Modeling ◽  
3D Printed ◽  
Genetic Techniques ◽  
Digital Healthcare

Three-dimensional ‎(‎3D) technique of restricting scrambling is changing the ways of drug design, labeling and ‎production in the area of ‎digital health. By combining digital and genetic techniques, Fused ‎Deposition Modeling (FDM) can manufacture ‎normalization systems. Consecutively, such a ‎method can allow for speedy improvements in the healthcare ‎systems, allowing the allocation ‎of medicines based on patient’s needs and requirements. So far, several 3D ‎based medicinal ‎goods have been marketed. These include the production of implants and several useful related ‎‎products for use in medical applications. Nevertheless, regulatory obstacles remain with ‎developing medicines. ‎This article reviews the latest FDM technology in medical and ‎pharmaceutical research, including a discussion of ‎the potential challenges in the field. ‎Emphasis has been paid on future developments needed for facilitating the ‎FDM integration ‎into dispensaries and clinics.‎

Development of three-dimensional printing filaments based on poly(lactic acid)/hydroxyapatite composites with potential for tissue engineering

2021 ◽  
pp. 002199832098856
Author(s):  
Marcela Piassi Bernardo ◽  
Bruna Cristina Rodrigues da Silva ◽  
Luiz Henrique Capparelli Mattoso
Keyword(s):  
Tissue Engineering ◽  
Lactic Acid ◽  
Fused Deposition Modeling ◽  
Three Dimensional ◽  
Poly Lactic Acid ◽  
Scanning Calorimetry ◽  
Three Dimensional Printing ◽  
Fused Deposition ◽  
Deposition Modeling ◽  
3D Printed

Injured bone tissues can be healed with scaffolds, which could be manufactured using the fused deposition modeling (FDM) strategy. Poly(lactic acid) (PLA) is one of the most biocompatible polymers suitable for FDM, while hydroxyapatite (HA) could improve the bioactivity of scaffold due to its chemical composition. Therefore, the combination of PLA/HA can create composite filaments adequate for FDM and with high osteoconductive and osteointegration potentials. In this work, we proposed a different approache to improve the potential bioactivity of 3D printed scaffolds for bone tissue engineering by increasing the HA loading (20-30%) in the PLA composite filaments. Two routes were investigated regarding the use of solvents in the filament production. To assess the suitability of the FDM-3D printing process, and the influence of the HA content on the polymer matrix, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC) and scanning electron microscopy (SEM) were performed. The HA phase content of the composite filaments agreed with the initial composite proportions. The wettability of the 3D printed scaffolds was also increased. It was shown a greener route for obtaining composite filaments that generate scaffolds with properties similar to those obtained by the solvent casting, with high HA content and great potential to be used as a bone graft.

scholarly journals 3D-Printed Soft Structure of Polyurethane and Magnetorheological Fluid: A Proof-of-Concept Investigation of its Stiffness Tunability

Micromachines ◽  
2019 ◽  
Vol 10 (10) ◽  
pp. 655 ◽  
Author(s):  
Seong-Woo Hong ◽  
Ji-Young Yoon ◽  
Seong-Hwan Kim ◽  
Sun-Kon Lee ◽  
Yong-Rae Kim ◽  
...  
Keyword(s):  
Fused Deposition Modeling ◽  
Permanent Magnets ◽  
Thermoplastic Polyurethane ◽  
Three Dimensional ◽  
Magnetorheological Fluid ◽  
Three Dimensional Printing ◽  
Fused Deposition ◽  
Deposition Modeling ◽  
3D Printed ◽  
Dimensional Printing

In this study, a soft structure with its stiffness tunable by an external field is proposed. The proposed soft beam structure consists of a skin structure with channels filled with a magnetorheological fluid (MRF). Two specimens of the soft structure are fabricated by three-dimensional printing and fused deposition modeling. In the fabrication, a nozzle is used to obtain channels in the skin of the thermoplastic polyurethane, while another nozzle is used to fill MRF in the channels. The specimens are tested by using a universal tensile machine to evaluate the relationships between the load and deflection under two different conditions, without and with permanent magnets. It is empirically shown that the stiffness of the proposed soft structure can be altered by activating the magnetic field.

scholarly journals A 3D Printed Jet Mixer for Centrifugal Microfluidic Platforms

Micromachines ◽  
2020 ◽  
Vol 11 (7) ◽  
pp. 695 ◽  
Author(s):  
Yunxia Wang ◽  
Yong Zhang ◽  
Zheng Qiao ◽  
Wanjun Wang
Keyword(s):  
3D Printing ◽  
Three Dimensional ◽  
Mixing Efficiency ◽  
Medical Applications ◽  
Microfluidic Platforms ◽  
Mixing Performance ◽  
Wide Range ◽  
3D Printed ◽  
Miscible Liquids ◽  
Biological And Medical Applications

Homogeneous mixing of microscopic volume fluids at low Reynolds number is of great significance for a wide range of chemical, biological, and medical applications. An efficient jet mixer with arrays of micronozzles was designed and fabricated using additive manufacturing (three-dimensional (3D) printing) technology for applications in centrifugal microfluidic platforms. The contact surface of miscible liquids was enhanced significantly by impinging plumes from two opposite arrays of micronozzles to improve mixing performance. The mixing efficiency was evaluated and compared with the commonly used Y-shaped micromixer. Effective mixing in the jet mixer was achieved within a very short timescale (3s). This 3D printed jet mixer has great potential to be implemented in applications by being incorporated into multifarious 3D printing devices in microfluidic platforms.

scholarly journals Typography-Like 3D-Printed Templates for the Lithography-Free Fabrication of Microfluidic Chips

2019 ◽  
Vol 25 (1) ◽  
pp. 82-87
Author(s):  
Wenqiong Su ◽  
Yulong Li ◽  
Lulu Zhang ◽  
Jiahui Sun ◽  
Shuopeng Liu ◽  
...  
Keyword(s):  
Processing Time ◽  
Fused Deposition Modeling ◽  
Three Dimensional ◽  
Cost Effective ◽  
Microfluidic Channels ◽  
3D Printer ◽  
Microfluidic Chips ◽  
Fused Deposition ◽  
Deposition Modeling ◽  
3D Printed

Typography-like templates for polydimethylsiloxane (PDMS) microfluidic chips using a fused deposition modeling (FDM) three-dimensional (3D) printer are presented. This rapid and fast proposed scheme did not require complicated photolithographic fabrication facilities and could deliver resolutions of ~100 μm. Polylactic acid (PLA) was adopted as the material to generate the 3D-printed units, which were then carefully assembled on a glass substrate using a heat-melt-curd strategy. This craft of bonding offers a cost-effective way to design and modify the templates of microfluidic channels, thus reducing the processing time of microfluidic chips. Finally, a flexible microfluidic chip to be employed for cell-based drug screening was developed based on the modularized 3D-printed templates. The lithography-free, typography-like, 3D-printed templates create a modularized fabrication process and promote the prevalence of integrated microfluidic systems with minimal requirements and improved efficiency.

scholarly journals Nuclear Magnetic Resonance Spectroscopyan Evolutionary Approach to Drug Design

2007 ◽  
Vol 4 (3) ◽  
pp. 294-301
Author(s):  
Neeraj Upmanyu ◽  
Gopal Garg ◽  
Archana Dolly ◽  
Pradeep Mishra
Keyword(s):  
Nuclear Magnetic Resonance ◽  
Drug Discovery ◽  
Magnetic Resonance ◽  
Drug Design ◽  
Small Molecules ◽  
Pharmaceutical Research ◽  
Three Dimensional ◽  
Drug Discovery And Development ◽  
4D Nmr ◽  
Nuclear Magnetic

Ever since Nuclear Magnetic Resonance (NMR) spectroscopy hit the analytical scene; its capabilities and applications continue to evolve. Originally designed as a way to verify the structure of relatively small compounds, the technology of NMR has exploded and become a valuable means for studying protein structure. NMR has proved to be a valuable tool in pharmaceutical research, as it has entered new arena of drug discovery and structural genomics. NMR can provide information on the three-dimensional structures of small molecules in solution, high-molecular-weight complexes, and the details of enzyme mechanisms that can be used to aid in drug design. In the present scenario, the availability of high magnetic fields; improved software, high resolution probes, and electronics; more versatile pulse programmers; and most importantly the development of 2D, 3D and 4D NMR, have revolutionized the field of drug discovery and development.

3D Printed Electrochemical Sensors

2021 ◽  
Vol 14 (1) ◽  
Author(s):  
Aya Abdalla ◽  
Bhavik Anil Patel
Keyword(s):  
Fused Deposition Modeling ◽  
Electrochemical Sensors ◽  
Three Dimensional ◽  
Annual Review ◽  
Publication Date ◽  
Fused Deposition ◽  
Novel Approach ◽  
Deposition Modeling ◽  
3D Printed ◽  
Analytical Tools

Three-dimensional (3D) printing has recently emerged as a novel approach in the development of electrochemical sensors. This approach to fabrication has provided a tremendous opportunity to make complex geometries of electrodes at high precision. The most widely used approach for fabrication is fused deposition modeling; however, other approaches facilitate making smaller geometries or expanding the range of materials that can be printed. The generation of complete analytical devices, such as electrochemical flow cells, provides an example of the array of analytical tools that can be developed. This review highlights the fabrication, design, preparation, and applications of 3D printed electrochemical sensors. Such developments have begun to highlight the vast potential that 3D printed electrochemical sensors can have compared to other strategies in sensor development. Expected final online publication date for the Annual Review of Analytical Chemistry, Volume 14 is August 2021. Please see http://www.annualreviews.org/page/journal/pubdates for revised estimates.

scholarly journals Fabrication of Drug-Eluting Nano-Hydroxylapatite Filled Polycaprolactone Nanocomposites Using Solution-Extrusion 3D Printing Technique

Polymers ◽  
2021 ◽  
Vol 13 (3) ◽  
pp. 318 ◽  
Author(s):  
Pang-Yun Chou ◽  
Ying-Chao Chou ◽  
Yu-Hsuan Lai ◽  
Yu-Ting Lin ◽  
Chia-Jung Lu ◽  
...  
Keyword(s):  
3D Printing ◽  
Fused Deposition Modeling ◽  
Three Dimensional ◽  
Fused Deposition ◽  
Drug Eluting ◽  
Deposition Modeling ◽  
3D Printed ◽  
Good Biocompatibility ◽  
3D Printing Technique ◽  
Moving Speed

Polycaprolactone/nano-hydroxylapatite (PCL/nHA) nanocomposites have found use in tissue engineering and drug delivery owing to their good biocompatibility with these types of applications in addition to their mechanical characteristics. Three-dimensional (3D) printing of PCL/nHA nanocomposites persists as a defiance mostly because of the lack of commercial filaments for the conventional fused deposition modeling (FDM) method. In addition, as the composites are prepared using FDM for the purpose of delivering pharmaceuticals, thermal energy can destroy the embedded drugs and biomolecules. In this report, we investigated 3D printing of PCL/nHA using a lab-developed solution-extrusion printer, which consists of an extrusion feeder, a syringe with a dispensing nozzle, a collection table, and a command port. The effects of distinct printing variables on the mechanical properties of nanocomposites were investigated. Drug-eluting nanocomposite screws were also prepared using solution-extrusion 3D printing. The empirical outcomes suggest that the tensile properties of the 3D-printed PCL/nHA nanocomposites increased with the PCL/nHA-to-dichloromethane (DCM) ratio, fill density, and print orientation but decreased with an increase in the moving speed of the dispensing tip. Furthermore, printed drug-eluting PCL/nHA screws eluted high levels of antimicrobial vancomycin and ceftazidime over a 14-day period. Solution-extrusion 3D printing demonstrated excellent capabilities for fabricating drug-loaded implants for various medical applications.

scholarly journals Three-dimensional printing of anatomically accurate, patient specific intracranial aneurysm models

2015 ◽  
Vol 8 (5) ◽  
pp. 517-520 ◽  
Author(s):  
Jeff R Anderson ◽  
Walker L Thompson ◽  
Abdulaziz K Alkattan ◽  
Orlando Diaz ◽  
Richard Klucznik ◽  
...  
Keyword(s):  
Fused Deposition Modeling ◽  
Statistical Significance ◽  
Three Dimensional ◽  
Cerebral Aneurysms ◽  
Patient Specific ◽  
Parent Artery ◽  
Significant Group ◽  
Fused Deposition ◽  
Deposition Modeling ◽  
3D Printed

ObjectiveTo develop and validate a method for creating realistic, patient specific replicas of cerebral aneurysms by means of fused deposition modeling.MethodsThe luminal boundaries of 10 cerebral aneurysms, together with adjacent proximal and distal sections of the parent artery, were segmented based on DSA images, and corresponding virtual three-dimensional (3D) surface reconstructions were created. From these, polylactic acid and MakerBot Flexible Filament replicas of each aneurysm were created by means of fused deposition modeling. The accuracy of the replicas was assessed by quantifying statistical significance in the variations of their inner dimensions relative to 3D DSA images. Feasibility for using these replicas as flow phantoms in combination with phase contrast MRI was demonstrated.Results3D printed aneurysm models were created for all 10 subjects. Good agreement was seen between the models and the source anatomy. Aneurysm diameter measurements of the printed models and source images correlated well (r=0.999; p<0.001), with no statistically significant group difference (p=0.4) or observed bias. The SDs of the measurements were 0.5 mm and 0.2 mm for source images and 3D models, respectively. 3D printed models could be imaged with flow via MRI.ConclusionsThe 3D printed aneurysm models presented were accurate and were able to be produced inhouse. These models can be used for previously cited applications, but their anatomical accuracy also enables their use as MRI flow phantoms for comparison with ongoing studies of computational fluid dynamics. Proof of principle imaging experiments confirm MRI flow phantom utility.

Mechanical and morphological investigations of 3D printed recycled ABS reinforced with bakelite–SiC–Al2O3

2019 ◽  
Vol 233 (17) ◽  
pp. 5933-5944 ◽  
Author(s):  
Rupinder Singh ◽  
Inderpreet Singh ◽  
Ranvijay Kumar
Keyword(s):  
Fused Deposition Modeling ◽  
Three Dimensional ◽  
Acrylonitrile Butadiene Styrene ◽  
Morphological Properties ◽  
Fused Deposition ◽  
Software Configuration ◽  
Twin Screw ◽  
Deposition Modeling ◽  
3D Printed ◽  
Commercial Applications

The utilization of thermosetting waste is a serious issue as it is not recycled commercially due to inherent molecular properties and high technology cost. This research details the study of the mechanical behavior and surface analysis with energy-dispersive X-ray spectroscopy and scanning electron microscope of three-dimensional printed parts of the waste thermosetting polymer, bakelite (BAK) as the reinforcement along with ceramic particles (SiC and Al2O3) in recycled thermoplastic acrylonitrile butadiene styrene matrix for sustainability. The process involves twin-screw extrusion for the preparation of filament, followed by 3D printing of functional prototypes on fused deposition modeling setup. The 3D printed parts prepared with fused deposition modeling were used for the testing of mechanical, thermal, and morphological properties. The results of the present study suggests that for commercial applications recycling of thermoplastic up to 10 wt% can be easily performed without a change in any hardware/ software configuration of the fused deposition modeling setup and the ceramic concentration in thermoplastic-thermosetting blends further led to better mechanical and surface properties.

scholarly journals 3D Bioprinting in Tissue Engineering for Medical Applications: The Classic and the Hybrid

Polymers ◽  
2020 ◽  
Vol 12 (8) ◽  
pp. 1717 ◽  
Author(s):  
Zelong Xie ◽  
Ming Gao ◽  
Anderson O. Lobo ◽  
Thomas J. Webster
Keyword(s):  
Tissue Engineering ◽  
Material Selection ◽  
Three Dimensional ◽  
Medical Applications ◽  
3D Bioprinting ◽  
Proper Selection ◽  
Selection Principles ◽  
3D Printed ◽  
Printed Materials ◽  
Selection Of

Three-dimensional (3D) printing, as one of the most popular recent additive manufacturing processes, has shown strong potential for the fabrication of biostructures in the field of tissue engineering, most notably for bones, orthopedic tissues, and associated organs. Desirable biological, structural, and mechanical properties can be achieved for 3D-printed constructs with a proper selection of biomaterials and compatible bioprinting methods, possibly even while combining additive and conventional manufacturing (AM and CM) procedures. However, challenges remain in the need for improved printing resolution (especially at the nanometer level), speed, and biomaterial compatibilities, and a broader range of suitable 3D-printed materials. This review provides an overview of recent advances in the development of 3D bioprinting techniques, particularly new hybrid 3D bioprinting technologies for combining the strengths of both AM and CM, along with a comprehensive set of material selection principles, promising medical applications, and limitations and future prospects.

Sign in / Sign up

Export Citation Format

Share Document