scholarly journals Logging Practices and Subsequent Development of Aspen Stands in East-Central Saskatchewan

1986 ◽  
Vol 62 (2) ◽  
pp. 81-83 ◽  
Author(s):  
I. E. Bella

A study was started in 1965 to quantify the effect of logging variables on initial sucker stand density and subsequent development of aspen (Populus tremuloides Michx.). The study found excellent stocking and density of sucker regeneration after both summer and winter logging of 70- to 80-year-old stands in east-central Saskatchewan. Logging slash on the ground reduced suckering but the density of regeneration even with heavy slash cover was similar to that found in fire-origin stands. Winter logging resulted in more uniform and less dense sucker regeneration. Large initial differences in stand density diminished to a 30% range or less by 5 years of age. This suggests that flexibility may be exercised in harvest scheduling and method of logging.

1992 ◽  
Vol 72 (4) ◽  
pp. 1349-1358 ◽  
Author(s):  
G. G. Bowes ◽  
R. P. Zentner

Four trials were conducted on a heavily grazed bluegrass-dominated pasture located in east-central Saskatchewan to compare the establishment of alfalfa (Medicago media Pers. Drylander) and forage grasses with no suppression vs. suppression of the resident vegetation using either glyphosate or rotovation. Successful forage establishment was based on seedling count, herbage yield and an economic assessment using net present value. The test area had been cleared of mature aspen poplar (Populus tremuloides Michx.) and balsam poplar (Populus balsamifera L.) trees, treated with 2,4-D to control suckering and was subsequently invaded by native forbs and grasses, mainly bluegrasses. Alfalfa successfully established with or without suppression while smooth bromegrass (Bromus inermis Leyss. ’Carlton’) established only when a suppression treatment was applied. Forage yields, averaged over 4 yr and four trials, following sod-seeding and glyphosate at 2.5 kg ha−1 were 1973 and 612 kg ha−1 for alfalfa and bluegrass plus smooth bromegrass, compared to 1287 and 748 kg ha−1 for alfalfa and bluegrass plus smooth bromegrass, respectively, when there was no suppression of the resident vegetation. The low-cost, no-suppression sod-seeding treatment was as profitable as the sod-seeding treatment using glyphosate.Key words: Sod-seed, zero till, alfalfa, smooth bromegrass, economics, glyphosate


2010 ◽  
Vol 19 (1) ◽  
pp. iii ◽  
Author(s):  
Miguel G. Cruz ◽  
Martin E. Alexander ◽  
Ronald H. Wakimoto

Application of crown fire behavior models in fire management decision-making have been limited by the difficulty of quantitatively describing fuel complexes, specifically characteristics of the canopy fuel stratum. To estimate canopy fuel stratum characteristics of four broad fuel types found in the western United States and adjacent areas of Canada, namely Douglas-fir, ponderosa pine, mixed conifer, and lodgepole pine forest stands, data from the USDA Forest Service's Forest Inventory and Analysis (FIA) database were analysed and linked with tree-level foliage dry weight equations. Models to predict canopy base height (CBH), canopy fuel load (CFL) and canopy bulk density (CBD) were developed through linear regression analysis and using common stand descriptors (e.g. stand density, basal area, stand height) as explanatory variables. The models developed were fuel type specific and coefficients of determination ranged from 0.90 to 0.95 for CFL, between 0.84 and 0.92 for CBD and from 0.64 to 0.88 for CBH. Although not formally evaluated, the models seem to give a reasonable characterization of the canopy fuel stratum for use in fire management applications.


2001 ◽  
Vol 31 (12) ◽  
pp. 2089-2097 ◽  
Author(s):  
Thomas T Veblen ◽  
Dominik Kulakowski ◽  
Karen S Eisenhart ◽  
William L Baker

As windstorm intensity increases above some threshold, disturbance spread and damage patterns are expected to be less strongly shaped by preblowdown forest composition and structure than by the pattern of the storm itself. We examined this generalization by analyzing differences in wind damage among tree species and stands following a severe blowdown in 1997 affecting over 10 000 ha of subalpine forest in the Routt Divide area of northern Colorado, U.S.A. Individual tree traits such as species, height, and status as standing dead or alive strongly influenced the amount and type (uprooting vs. snapping) of wind damage. Populus tremuloides Michx. exhibited much less uprooting and overall damage than the conifers. Among the canopy trees of the conifer species, Pinus contorta Dougl. ex. Loud and Abies lasiocarpa (Hook.) Nutt. sustained the lowest and highest rates of snapping, respectively. Standing dead conifers were more likely to be snapped than uprooted, and taller trees were more likely to be damaged than shorter trees. Stand-level characteristics such as stand density, amount of dead basal area, and species composition were predictive of the amount of wind damage for areas of moderate- but not high-severity blowdown. Even in such an extreme windstorm as the Routt blowdown, which had estimated wind speeds of 200–250 km/h, individual tree attributes and stand-level characteristics significantly influenced the severity and type of wind damage.


2003 ◽  
Vol 12 (1) ◽  
pp. 39 ◽  
Author(s):  
Miguel G. Cruz ◽  
Martin E. Alexander ◽  
Ronald H. Wakimoto

Application of crown fire behavior models in fire management decision-making have been limited by the difficulty of quantitatively describing fuel complexes, specifically characteristics of the canopy fuel stratum. To estimate canopy fuel stratum characteristics of four broad fuel types found in the western United States and adjacent areas of Canada, namely Douglas-fir, ponderosa pine, mixed conifer, and lodgepole pine forest stands, data from the USDA Forest Service's Forest Inventory and Analysis (FIA) database were analysed and linked with tree-level foliage dry weight equations. Models to predict canopy base height (CBH), canopy fuel load (CFL) and canopy bulk density (CBD) were developed through linear regression analysis and using common stand descriptors (e.g. stand density, basal area, stand height) as explanatory variables. The models developed were fuel type specific and coefficients of determination ranged from 0.90 to 0.95 for CFL, between 0.84 and 0.92 for CBD and from 0.64 to 0.88 for CBH. Although not formally evaluated, the models seem to give a reasonable characterization of the canopy fuel stratum for use in fire management applications.


1991 ◽  
Vol 71 (4) ◽  
pp. 1133-1141
Author(s):  
R. P. Zentner ◽  
G. G. Bowes

The economic merit of controlling brush regrowth using combinations of 2,4-D and dicamba with different patterns of repeat applications was assessed for pastures in east-central Saskatchewan. Two experiments were conducted simultaneously in a community pasture located on a Waitville loam. The area, which was originally dominated by aspen poplar (Populus tremuloides Michx.), had been cleared of trees and shrubs by bulldozing before the start of the tests. In the first experiment started in 1981, 2,4-D ester plus dicamba and 2,4-D amine plus dicamba were foliar applied to the brush regrowth. Single applications were compared with repeat sprayings in the first, second, or in both years following the initial herbicide application. A subset of these treatments was used in a second experiment started in 1983 to determine whether or not productivity effects were influenced by growing conditions in the initial year of spraying. Herbicides effectively controlled brush regrowth which increased yields of useable herbage (grasses plus forbs) by an average of 32–39%. The forage benefits did not decline with time to the end of the study in 1989. Herbicide treatments were generally more profitable when applied to younger stands of brush regrowth, with the 2,4-D ester formulations being more profitable than 2,4-D amine formulations. Economic returns were highest, although not always positive, for the treatment receiving a one-time application of 2-4-D ester at 2.2 kg ha−1 plus dicamba at 1.5 kg ha−1 for forage values between $25 and $75 t−1 (dry weight) and discount rates between 0 and 10%. In order to justify this treatment cost, the minimum value that must be obtained when utilizing the additional forage was $20 t−1 (dry weight) for the most profitable control treatment, assuming a 5% discount rate and persistance of the treatment effects for up to 18 yr. For the other treatments, breakeven forage values ranged between $37 and 70 t−1 under similar assumptions. Higher discount rates or a shorter effective treatment life increased breakeven forage values. Repeat herbicide applications could not be justified under any of the economic scenarios. Key words: Net present value, benefit-cost ratios, discount rate, aspen poplar, herbicides, 2,4-D


2004 ◽  
Vol 34 (2) ◽  
pp. 267-273 ◽  
Author(s):  
Jill F Johnstone ◽  
F S Chapin III ◽  
J Foote ◽  
S Kemmett ◽  
K Price ◽  
...  

This paper presents data on early postfire tree regeneration. The data were obtained from repeated observations of recently burned forest stands along the Yukon – British Columbia border and in interior Alaska. Postfire measurements of tree density were made periodically for 20–30 years, providing direct observations of early establishment patterns in boreal forest. Recruitment rates of the dominant tree species in both study areas were highest in the first 5 years after fire, and additional net establishment was not observed after 10 years. The postfire population of spruce (Picea mariana (Mill.) BSP and Picea glauca (Moench) Voss s.l.) remained constant after the first decade in the two study areas. Populations of aspen (Populus tremuloides Michx.) and lodgepole pine (Pinus contorta Dougl. ex Loud. var. latifolia Engelm.) both declined after 10 years in mixed-species stands along the Yukon – British Columbia border. Mortality rates of aspen and pine were positively correlated with their initial densities, indicating that thinning occurred as a density-dependent process. At all sites, measurements of stand density and composition made early were highly correlated with those made late in the monitoring period, indicating that patterns of stand structure initiated within a few years after fire are maintained through subsequent decades of stand development.


ISRN Forestry ◽  
2012 ◽  
Vol 2012 ◽  
pp. 1-9 ◽  
Author(s):  
John-Pascal Berrill ◽  
Christa M. Dagley

Awareness of geographic patterns and stand variables that influence tree growth will help forest managers plan appropriate management and monitoring strategies. We quantified influences of stand location, species composition, stand density, and tree size on aspen tree growth and vigor around the Lake Tahoe Basin in the Sierra Nevada Mountains of California and Nevada, USA. Radial growth data were taken from increment cores. Aspen trees on the south and west sides of the lake grew 20–25% faster than aspen in north and east side stands. Diameter growth at 2,400 m elevation was 58% of growth at 1,900 m near lake level. Aspen grew faster with less competition from neighbor trees. At any level of competition, aspen growth was slower beside conifer neighbors and correlated with crown ratio (CR: length of live crown relative to total tree height, a proxy for tree vigor). Analysis of independent CR data for 707 aspen trees in nine additional stands indicated that aspen had smaller crowns in the presence of greater competition, and that composition of neighbor trees also affected CR: aspen trees had shorter crowns in the presence of conifer at higher stand densities. Taken collectively, our analyses point towards a cascading decline in aspen growth and vigor incited by succession of aspen stands to conifers. Our findings suggest that conifer removal and stand density control in aspen-conifer stands at Lake Tahoe will enhance aspen growth and vigor.


1977 ◽  
Vol 7 (4) ◽  
pp. 666-679 ◽  
Author(s):  
T. D. W. James ◽  
D. W. Smith

The standing crop of biomass and nutrients (N, P, K, Ca, and Mg) were estimated for Populus tremuloides trunk, lateral branch twig, and foliage in a 30-year-old open stand in West Luther Township, Wellington County, Ontario. Separate estimates were made for trees in areas subjected to light surface burning (about 160 °C at the surface) and in unburned areas. Allometric relations between a variety of tree measures showed that the best estimates of standing crop were derived from simple log regressions with trunk dbh as the independent variable.The range of 7.0 to 8.9 t/ha of total aerial aspen biomass was considerably lower than other reported values and reflected both the low stand density and poor site conditions. Accumulation of tree biomass was unchanged by light surface burning. Evidently, the environmental changes were too slight to cause postfire changes in the established overstory.Distribution of nutrients within the tree components was similar to that reported elsewhere; Ca and N were the two most abundant, while P, K, and Mg accumulations were much lower. The relative importance of various tree components as nutrient accumulation sites followed the order leaves > twigs > lateral branches > trunk. The leaves were the site of the accumulation of functionally important N, P, K, and Mg whereas the trunk was the prominent site for structurally important calcium. The total accumulation of all nutrients (103.5 kg/ha) was strikingly low in comparison with amounts reported for other deciduous forests. Accumulation of nutrients in the trunk, lateral branches, and twigs was not appreciably altered by fire. Major proportions of nutrients in these components would have accumulated before burning.Amounts of nutrients contained in leaf biomass were significantly changed after burning. Concentrations in leaves from burned areas were 24–42% higher than control levels, whereas the preburn levels were similar. These substantial postburn increases in leaf nutrient levels, related to a flush of soil nutrients from ash, would have an important effect on those wildlife species utilizing the aspen as a food source.


2014 ◽  
Vol 44 (11) ◽  
pp. 1369-1375 ◽  
Author(s):  
Lafe G. Conner ◽  
Michael C. Bunnell ◽  
Richard A. Gill

Tree mortality because of beetle outbreaks has become substantial and widespread in conifer forests in western North America. A number of environmental and physiological factors influence patterns of mortality. Tree diversity may reduce the severity and extent of insect damage to host trees by providing associational resistance, but the existence and importance of associational resistance varies by forest type and by tree and insect species. We assessed whether plot-level tree diversity contributed to survival of Engelmann spruce (Picea engelmannii Parry ex Engelm.) following a spruce beetle (Dendroctonus rufipennis Kirby) epidemic. Our study plots comprised 2 to 5 tree species including Engelmann spruce, subalpine fir (Abies lasiocarpa (Hook) Nutt.), Douglas-fir (Pseudostuga menziesii (Mirb.) Franco), quaking aspen (Populus tremuloides Michx.), and white fir (Abies concolor (Gordon & Glend.) Hildebr.). We used a model-selection analysis to compare the importance of tree diversity with other known factors that influence spruce survival. We found lower rates of spruce survival in stands where spruce was the dominant tree species (by percent of stand density index) and higher survival in stands where nonspruce conifers (Douglas-fir, subalpine, and white fir) were dominant. We also found that tree diversity (Shannon index) did not show a positive correlation to spruce survival and that there was no additional benefit derived from the presence of aspen, which has higher phylogenetic distance from Engelmann spruce than the other trees in this study. The relationship between diversity and survival is complicated by factors that naturally co-vary with diversity, such as elevation, aspect, and stand density of spruce. Our results best support an explanation that if associational resistance does increase spruce survival during a beetle epidemic, it is due to host or resource dilution, which may be an indirect effect of higher stand diversity.


1993 ◽  
Vol 3 (2) ◽  
pp. 85 ◽  
Author(s):  
JK Smith ◽  
RD Laven ◽  
PN Omi

Fire behavior research has traditionally used whole burns as sampling units. Numerous burns were required to quantify relationships between pre-burn descriptors, fire behavior, and fire effects. Recent studies have used small plots within burns (called microplots) as the sampling units. This study measured pre-burn descriptors and fire behavior on 0.75-m2 microplots in two Populus tremuloides Michx. burns in north-central Colorado. Microplot estimates of woody fuels, spread rate, and area burned were comparable with measurements from whole burns. Two methods of estimating fire intensity on microplots produced inconsistent results. Juniperus communis L. patches burned more intensely and released more heat than herbaceous areas. Duff characteristics were the most useful pre-burn descriptors for predicting area burned, spread rate, flame length, and total heat release. Microplot sampling on two bums enabled us to relate variability in fire behavior to pre-burn characteristics and to obtain replicate estimates of these relationships.


Sign in / Sign up

Export Citation Format

Share Document