Alternate Strip Clearcutting in Upland Black Spruce: III. Regeneration Options for Leave Strips

1987 ◽  
Vol 63 (6) ◽  
pp. 446-450 ◽  
Author(s):  
James E. Wood ◽  
Richard Raper
Keyword(s):  
Pinus Banksiana ◽  
Black Spruce ◽  
Cost Savings ◽  
Jack Pine ◽  
Direct Seeding ◽  
Transparent Plastic ◽  
Management Objectives ◽  
Biological Criteria ◽  
Alternative Sources ◽  
Topographic Positions

In the alternate strip clearcutting system, first-cut strips are regenerated by seed produced by black spruce (Picea mariana [Mill.] B.S.P.) in the forested leave strips. However, after the second cut, such a seed source is not available for regenerating the leave strips. Therefore, the forest manager must consider a number of alternative regeneration options. The selection of the most appropriate regeneration option is dependent upon several economic and biological criteria. These include future costs of delivered wood, site productivity, post-harvest site condition, future alternative sources of supply, and future demand for industrial wood. Regeneration options such as preservation of advance growth and direct seeding are recommended for sites on which the manager is concerned primarily with regenerating first cut strips and is willing to accept a lower level of stocking in leave strips. Planting, the most intensive option discussed, should be reserved for sites offering the highest potential return or greatest future cost savings. Direct seeding of jack pine (Pinus banksiana Lamb.) should be considered on the upland portions of this patterned site type. Mixing jack pine and black spruce is a suggested regeneration option if the site contains both upland and lowland topographic positions. Other seeding options include the use of semi-transparent plastic seed shelters. The manager might consider combining two or more of these options to meet management objectives.

scholarly journals Cold hardiness of white spruce, black spruce, jack pine, and lodgepole pine needles during dehardening

2017 ◽  
Vol 47 (8) ◽  
pp. 1116-1122 ◽  
Author(s):  
Rongzhou Man ◽  
Pengxin Lu ◽  
Qing-Lai Dang
Keyword(s):  
Picea Glauca ◽  
Pinus Banksiana ◽  
Cold Hardiness ◽  
Black Spruce ◽  
Lodgepole Pine ◽  
White Spruce ◽  
Visual Assessment ◽  
Jack Pine ◽  
Pine Needles ◽  
Late Winter

Conifer winter damage results primarily from loss of cold hardiness during unseasonably warm days in late winter and early spring, and such damage may increase in frequency and severity under a warming climate. In this study, the dehardening dynamics of lodgepole pine (Pinus contorta Dougl. ex. Loud), jack pine (Pinus banksiana Lamb.), white spruce (Picea glauca (Moench) Voss), and black spruce (Picea mariana (Mill.) B.S.P.) were examined in relation to thermal accumulation during artificial dehardening in winter (December) and spring (March) using relative electrolyte leakage and visual assessment of pine needles and spruce shoots. Results indicated that all four species dehardened at a similar rate and to a similar extent, despite considerably different thermal accumulation requirements. Spring dehardening was comparatively faster, with black spruce slightly hardier than the other conifers at the late stage of spring dehardening. The difference, however, was relatively small and did not afford black spruce significant protection during seedling freezing tests prior to budbreak in late March and early May. The dehardening curves and models developed in this study may serve as a tool to predict cold hardiness by temperature and to understand the potential risks of conifer cold injury during warming–freezing events prior to budbreak.

Forest floor mass and nutrients in two chronosequences of plantations: Jack pine vs. black spruce

1998 ◽  
Vol 78 (1) ◽  
pp. 77-83 ◽  
Author(s):  
Helmut Krause
Keyword(s):  
Nutrient Cycling ◽  
Picea Mariana ◽  
Forest Floor ◽  
Pinus Banksiana ◽  
Forest Cover ◽  
Black Spruce ◽  
Jack Pine ◽  
Pine Plantations ◽  
Nutrient Concentrations ◽  
Natural Forests

The purpose of this study was to determine whether change of forest cover had an effect on the development of the organic surface horizons, particularly on those variables that influence nutrient cycling and forest productivity. Jack pine (Pinus banksiana Lamb.) and black spruce (Picea mariana [Mill.] B.S.P.) plantations were selected from among the youngest to oldest (2–16 yr) within a 100 km2 area in southeastern New Brunswick. Natural forests were also included as benchmark sites. The forest floor and tree foliage was sampled and trees measured on 0.05-ha plots. The forest floor samples were used to determine organic mass, nutrient contents and pH. In pine plantations, organic matter accumulated rapidly during the period of exponential tree growth, but leveled off at about 45 Mg ha–1. This was within the range of benchmark sites with mixed conifer-hardwood cover. In spruce plantations, the forest floor mass ranged upward to 77 Mg ha–1. Development was strongly influenced by the nature of the previous forest. Spruce forest floors were on average more acid and had lower nutrient concentrations, particularly N and Ca. The observed differences suggest that nutrients are recycled more rapidly in the pine plantations, partly explaining the superior growth of the latter. Key words: Forest floor, Kalmia angustifolia L., Picea mariana (Mill.) B.S.P., Pinus banksiana Lamb., nutrient cycling, plantation forest

Short-term effects of cut-to-length versus full-tree harvesting on conifer regeneration in jack pine, mixedwood, and black spruce forests in Manitoba

2004 ◽  
Vol 34 (9) ◽  
pp. 1938-1945 ◽  
Author(s):  
Isobel Waters ◽  
Steven W Kembel ◽  
Jean-François Gingras ◽  
Jennifer M Shay
Keyword(s):  
Picea Mariana ◽  
Picea Glauca ◽  
Pinus Banksiana ◽  
Black Spruce ◽  
Abies Balsamea ◽  
Jack Pine ◽  
Tree Regeneration ◽  
Understorey Vegetation ◽  
Advance Regeneration ◽  
The Impact

This study compares the effects of full-tree versus cut-to-length forest harvesting methods on tree regeneration in jack pine (Pinus banksiana Lamb.), mixedwood (Picea glauca (Moench) Voss – Populus tremuloides Michx. – Abies balsamea (L.) Mill.), and black spruce (Picea mariana (Mill.) BSP) sites in southeastern Manitoba, Canada. We surveyed tree regeneration densities, disturbance characteristics, and understorey vegetation in replicated control and harvested plots in each site type preharvest (1993) and 1 and 3 years postharvest (1994, 1996). In jack pine sites, the full-tree harvest method promoted regeneration of Pinus banksiana through increased disturbance of soil and the moss layer, and decreased slash deposition relative to the cut-to-length method. Conversely, in mixedwood sites the cut-to-length method resulted in less damage to advance regeneration and proved better at promoting postharvest regeneration of Abies balsamea and Picea glauca relative to the full-tree method. In black spruce sites, there were few differences in the impact of the two harvesting methods on regeneration of Picea mariana, which increased in frequency and density after both types of harvesting.

scholarly journals Jack Pine Regeneration Following Postcut Burning under Seed Trees in Central Saskatchewan

1988 ◽  
Vol 64 (4) ◽  
pp. 315-319 ◽  
Author(s):  
Z. Chrosciewicz
Keyword(s):  
Populus Tremuloides ◽  
Growth Rates ◽  
Pinus Banksiana ◽  
Forest Regeneration ◽  
Black Spruce ◽  
Timber Harvest ◽  
Jack Pine ◽  
Growing Seasons ◽  
Pine Regeneration ◽  
Slash Burning

An experimental burn in conjunction with a seed-tree system was successful in regenerating jack pine (Pinus banksiana Lamb.) on a fresh to somewhat moist upland, loamy till, cutover site in central Saskatchewan. About 20 well-formed, uniformly spaced seed trees per hectare were left standing during timber harvest. The ignition of logging slash was carried out under preselected weather and fuel conditions so that favorable seedbeds and adequate seed dispersal from the seed trees were produced. Four growing seasons after burning, jack pine stocking by 4-m2 quadrats was 90% with 12 195 seedlings/ha. Aspen (Populus tremuloides Michx.), to a lesser degree black spruce (Picea mariana [Mill.] B.S.P.), and other companion tree species also regenerated with the pine. Various seedbed and regeneration characteristics as well as height growth rates are discussed. Key words: Pinus banksiana, slash burning, seed-tree system, forest regeneration, growth rates, central Saskatchewan.

Mixed-species effect on tree aboveground carbon pools in the east-central boreal forests

2010 ◽  
Vol 40 (1) ◽  
pp. 37-47 ◽  
Author(s):  
Xavier Cavard ◽  
Yves Bergeron ◽  
Han Y.H. Chen ◽  
David Paré
Keyword(s):  
Boreal Forest ◽  
Populus Tremuloides ◽  
Pinus Banksiana ◽  
Black Spruce ◽  
Mixed Forest ◽  
Jack Pine ◽  
Carbon Gain ◽  
Trembling Aspen ◽  
Niche Complementarity ◽  
Aboveground Carbon

This study investigates the potential of mixed forest stands as better aboveground carbon sinks than pure stands. According to the facilitation and niche complementarity hypotheses, we predict higher carbon sequestration in mature boreal mixedwoods. Aboveground carbon contents of black spruce ( Picea mariana (Mill.) Britton, Sterns, Poggenb.) and trembling aspen ( Populus tremuloides Michx.) mixtures were investigated in the eastern boreal forest, whereas jack pine ( Pinus banksiana Lamb.) and trembling aspen were used in the central boreal forest. No carbon gain was found in species mixtures; nearly pure trembling aspen stands contained the greatest amount of aboveground carbon, black spruce stands had the least, and mixtures were intermediate with amounts that could generally be predicted by linear interpolation with stem proportions. These results suggest that for aspen, the potentially detrimental effect of spruce on soils observed in other studies may be offset by greater light availability in mixtures. On the other hand, for black spruce, the potentially beneficial effects of aspen on soils could be offset by greater competition by aspen for nutrients and light. The mixture of jack pine and trembling aspen did not benefit any of these species while inducing a loss in trembling aspen carbon at the stand level.

Growth intercept models for black spruce, jack pine and balsam fir in Quebec

2005 ◽  
Vol 81 (1) ◽  
pp. 104-113 ◽  
Author(s):  
Daniel Mailly ◽  
Mélanie Gaudreault
Keyword(s):  
Pinus Banksiana ◽  
Black Spruce ◽  
Abies Balsamea ◽  
Site Index ◽  
Jack Pine ◽  
Balsam Fir ◽  
Practical Significance ◽  
Interim Testing ◽  
Growth Intercept ◽  
Mean Square Errors

The objective of this study was to develop variable growth intercept models for coniferous species of major importance in Quebec using Nigh's (1997a) modelling technique. Eighty-three, 68, and 70 stem analysis plots of black spruce (Picea mariana [Mill.] BSP), jack pine (Pinus banksiana Lamb.) and balsam fir (Abies balsamea (L.) Mill) were used, respectively. The growth intercept models for black spruce were the most precise, followed by those for jack pine and finally by those for balsam fir, based on the root mean square errors. Results indicated that the accuracy of the models was good, relative to those previously published for other species in Canada. Interim testing of the models revealed a low mean error for all three species that may not be of practical significance for site index determination, although more data should be obtained to further test the models. Key words: balsam fir, black spruce, growth intercept, jack pine, model, nonlinear regression, site index

Individual height–diameter models for young black spruce (Picea mariana) and jack pine (Pinus banksiana) plantations in New Brunswick, Canada

2009 ◽  
Vol 85 (1) ◽  
pp. 43-56 ◽  
Author(s):  
Xiangdong Lei ◽  
Changhui Peng ◽  
Haiyan Wang ◽  
Xiaolu Zhou
Keyword(s):  
New Brunswick ◽  
Picea Mariana ◽  
Pinus Banksiana ◽  
Black Spruce ◽  
Jack Pine ◽  
Tree Level ◽  
Forest Stands ◽  
Tolerance Intervals ◽  
Group I ◽  
Group Ii

Historically, height–diameter models have mainly been developed for mature trees; consequently, few height–diameter models have been calibrated for young forest stands. In order to develop equations predicting the height of trees with small diameters, 46 individual height–diameter models were fitted and tested in young black spruce (Picea mariana) and jack pine (Pinus banksiana) plantations between the ages of 4 to 8 years, measured from 182 plots in New Brunswick, Canada. The models were divided into 2 groups: a diameter group and a second group applying both diameter and additional stand- or tree-level variables (composite models). There was little difference in predicting tree height among the former models (Group I) while the latter models (Group II) generally provided better prediction. Based on goodness of fit (R2and MSE), prediction ability (the bias and its associated prediction and tolerance intervals in absolute and relative terms), and ease of application, 2 Group II models were recommended for predicting individual tree heights within young black spruce and jack pine forest stands. Mean stand height was required for application of these models. The resultant tolerance intervals indicated that most errors (95%) associated with height predictions would be within the following limits (a 95% confidence level): [-0.54 m, 0.54 m] or [-14.7%, 15.9%] for black spruce and [-0.77 m, 0.77 m] or [-17.1%, 18.6%] for jack pine. The recommended models are statistically reliable for growth and yield applications, regeneration assessment and management planning. Key words: composite model, linear model, model calibration, model validation, prediction interval, tolerance interval

scholarly journals Height growth of black spruce and jack pine seedlings in flooded flats

1975 ◽  
Vol 51 (2) ◽  
pp. 53-54
Author(s):  
W. Stanek
Keyword(s):  
Nutrient Solution ◽  
Picea Mariana ◽  
Concentration Gradient ◽  
Pinus Banksiana ◽  
Black Spruce ◽  
Jack Pine ◽  
Height Growth ◽  
Distilled Water ◽  
Pine Seedlings ◽  
Water Height

Black spruce (Picea mariana [Mill.] B.S.P.) and jack pine (Pinus banksiana Lamb.) seedlings were grown in a green-house on peat-filled flats flooded with nutrient solution or distilled water. None was aerated. However, an O2 concentration gradient existed across the flats, 3.0 – 3.7 ppm along the edges, and 1.4 – 1.9 ppm in the centers. After 4½ months seedlings of both species grew taller with nutrient solution than with distilled water. In flats supplied with nutrient solution, seedlings of both species grew taller along the edges than in the centers, whereas in flats supplied with distilled water height differential did not develop. Jack pine grew taller than black spruce under similar conditions.

scholarly journals Site Conditions for Jack Pine Seeding

1990 ◽  
Vol 66 (6) ◽  
pp. 579-584 ◽  
Author(s):  
Z. Chrosciewicz
Keyword(s):  
Key Words ◽  
Pinus Banksiana ◽  
Strong Relationship ◽  
Jack Pine ◽  
Direct Seeding ◽  
Site Conditions ◽  
Regeneration Potential ◽  
Seed Sources ◽  
Controlled Burning ◽  
Pine Regeneration

There is a strong relationship between jack pine (Pinus banksiana Lamb.) regeneration and the combined site and seedbed conditions at the time of seeding. Both unfavorable and favorable seedbed characteristics, as well as available seed sources, are reviewed by groups of sites, and then optional uses of major seedbed and seeding treatments are discussed in terms of practical considerations. Site groups with regeneration potential ranging from high to low are also indicated. Key words: Pinus banksiana, cutover areas, seedbeds, seed sources, mechanical scarification, controlled burning, seed-tree system, direct seeding, pine regeneration.

Sign in / Sign up

Export Citation Format

Share Document