Three-Dimensional Coastal Geomorphology Deformation Modelling Using Differential Synthetic Aperture Interferometry

2012 ◽  
Vol 67 (6-7) ◽  
pp. 419-420 ◽  
Keyword(s):  
Root Mean Square Error ◽  
Three Dimensional ◽  
Phase Unwrapping ◽  
Coastal Geomorphology ◽  
Synthetic Aperture ◽  
Mean Square ◽  
New Approach ◽  
Deformation Simulation ◽  
Accurate Performance ◽  
Fine Mode

This work presents a new approach for three-dimensional (3D) coastal deformation simulation using differential synthetic aperture interferometry (DInSAR). In doing so, conventional InSAR procedures are implemented to three repeat passes of RADARSAT-1 SAR fine mode data (F1). Further, the DInSAR method is implemented with the phase unwrapping technique. Consequently, DInSAR is used to eliminate the phase decorrelation impact from the interferograms. The study shows the accurate performance of DInSAR with a root mean square error of 0:02 ±0:21 m and 90% confidence intervals. In conclusion, the DInSAR technique produces an accurate 3D coastal geomorphology reconstruction

scholarly journals Improving Quantitative Rainfall Prediction Using Ensemble Analogues in the Tropics: Case study of Uganda

2017 ◽  
Author(s):  
Isaac Mugume ◽  
Michel d. S. Mesquita ◽  
Yazidhi Bamutaze ◽  
Didier Ntwali ◽  
Charles Basalirwa ◽  
...  
Keyword(s):  
Root Mean Square Error ◽  
Ensemble Methods ◽  
Predictive Performance ◽  
Mean Square ◽  
New Approach ◽  
Rainfall Prediction ◽  
Ensemble Mean ◽  
Additional Improvement ◽  
The Tropics

Accurate and timely rainfall prediction enhances productivity and can aid proper planning in sectors such as agriculture, health, transport and water resources. This study is aimed at improving rainfall prediction using ensemble methods. It first assesses the performance of six convective schemes (Kain–Fritsch (KF); Betts–Miller–Janji´c (BMJ); Grell–Fretas (GF); Grell 3D ensemble (G3); New–Tiedke (NT) and Grell–Devenyi (GD)) using the root mean square error (RMSE) and mean error (ME) focusing on the March–May 2013 rainfall period over Uganda. 18 ensemble members are generated from the three best performing convective schemes (i.e. KF, GF & G3). The performance of three ensemble methods (i.e. ensemble mean (EM); ensemble mean analogue (EMA) and multi–member analogue ensemble (MAEM)) is also analyzed using the RMSE and ME. The EM presented a smaller RMSE compared to individual schemes (EM:10.02; KF:23.96; BMJ:26.04; GF:25.85; G3:24.07; NT:29.13 & GD:26.27) and a better bias (EM:-1.28; KF:-1.62; BMJ:-4.04; GF:-3.90; G3:-3.62; NT:-5.41 & GD:-4.07). The EMA and MAEM presented 13 out of 21 stations & 17 out of 21 stations respectively with smaller RMSE compared to EM thus demonstrating additional improvement in predictive performance. The MAEM is a new approach proposed and described in the study.

scholarly journals Estimation of Apple Flowering Frost Loss for Fruit Yield Based on Gridded Meteorological and Remote Sensing Data in Luochuan, Shaanxi Province, China

2021 ◽  
Vol 13 (9) ◽  
pp. 1630
Author(s):  
Yaohui Zhu ◽  
Guijun Yang ◽  
Hao Yang ◽  
Fa Zhao ◽  
Shaoyu Han ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Root Mean Square Error ◽  
Mean Square Error ◽  
Root Mean Square ◽  
Minimum Temperature ◽  
Price Regulation ◽  
Flowering Period ◽  
Mean Square ◽  
Prevention Measures ◽  
Agricultural Insurance

With the increase in the frequency of extreme weather events in recent years, apple growing areas in the Loess Plateau frequently encounter frost during flowering. Accurately assessing the frost loss in orchards during the flowering period is of great significance for optimizing disaster prevention measures, market apple price regulation, agricultural insurance, and government subsidy programs. The previous research on orchard frost disasters is mainly focused on early risk warning. Therefore, to effectively quantify orchard frost loss, this paper proposes a frost loss assessment model constructed using meteorological and remote sensing information and applies this model to the regional-scale assessment of orchard fruit loss after frost. As an example, this article examines a frost event that occurred during the apple flowering period in Luochuan County, Northwestern China, on 17 April 2020. A multivariable linear regression (MLR) model was constructed based on the orchard planting years, the number of flowering days, and the chill accumulation before frost, as well as the minimum temperature and daily temperature difference on the day of frost. Then, the model simulation accuracy was verified using the leave-one-out cross-validation (LOOCV) method, and the coefficient of determination (R2), the root mean square error (RMSE), and the normalized root mean square error (NRMSE) were 0.69, 18.76%, and 18.76%, respectively. Additionally, the extended Fourier amplitude sensitivity test (EFAST) method was used for the sensitivity analysis of the model parameters. The results show that the simulated apple orchard fruit number reduction ratio is highly sensitive to the minimum temperature on the day of frost, and the chill accumulation and planting years before the frost, with sensitivity values of ≥0.74, ≥0.25, and ≥0.15, respectively. This research can not only assist governments in optimizing traditional orchard frost prevention measures and market price regulation but can also provide a reference for agricultural insurance companies to formulate plans for compensation after frost.

scholarly journals Exploration of collagen cavitation based on peptide electrolysis

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Rui Zhai ◽  
Hui Chen ◽  
Zhihua Shan
Keyword(s):  
Structural Changes ◽  
Preparation Method ◽  
Supporting Electrolyte ◽  
Three Dimensional ◽  
Anode Region ◽  
New Approach ◽  
New Material ◽  
Animal Skin ◽  
Exchange Membrane ◽  
Material Preparation

AbstractElectrochemical modification of animal skin is a new material preparation method and new direction of research exploration. In this study, under the action of the electric field using NaCl as the supporting electrolyte, the effect of electrolysis on Glycyl-glycine(GlyGl), gelatin(Gel) and Three-dimensional rawhide collagen(3DC) were determined. The amino group of GlyGl is quickly eliminated within the anode region by electrolysis isolated by an anion exchange membrane. Using the same method, it was found that the molecular weight of Gel and the isoelectric point of the Gel decreased, and the viscosity and transparency of the Gel solution obviously changed. The electrolytic dissolution and structural changes of 3DC were further investigated. The results of TOC and TN showed that the organic matter in 3DC was dissolved by electrolysis, and the tissue cavitation was obvious. A new approach for the preparation of collagen-based multi-pore biomaterials by electrochemical method was explored.

scholarly journals Low Cost Automatic Reconstruction of Tree Structure by AdQSM with Terrestrial Close-Range Photogrammetry

Forests ◽  
2021 ◽  
Vol 12 (8) ◽  
pp. 1020
Author(s):  
Yanqi Dong ◽  
Guangpeng Fan ◽  
Zhiwu Zhou ◽  
Jincheng Liu ◽  
Yongguo Wang ◽  
...  
Keyword(s):  
Root Mean Square Error ◽  
Mean Square Error ◽  
Root Mean Square ◽  
Low Cost ◽  
Reference Value ◽  
Tree Height ◽  
Point Clouds ◽  
Tree Structure ◽  
Mean Square ◽  
Tree Model

The quantitative structure model (QSM) contains the branch geometry and attributes of the tree. AdQSM is a new, accurate, and detailed tree QSM. In this paper, an automatic modeling method based on AdQSM is developed, and a low-cost technical scheme of tree structure modeling is provided, so that AdQSM can be freely used by more people. First, we used two digital cameras to collect two-dimensional (2D) photos of trees and generated three-dimensional (3D) point clouds of plot and segmented individual tree from the plot point clouds. Then a new QSM-AdQSM was used to construct tree model from point clouds of 44 trees. Finally, to verify the effectiveness of our method, the diameter at breast height (DBH), tree height, and trunk volume were derived from the reconstructed tree model. These parameters extracted from AdQSM were compared with the reference values from forest inventory. For the DBH, the relative bias (rBias), root mean square error (RMSE), and coefficient of variation of root mean square error (rRMSE) were 4.26%, 1.93 cm, and 6.60%. For the tree height, the rBias, RMSE, and rRMSE were—10.86%, 1.67 m, and 12.34%. The determination coefficient (R2) of DBH and tree height estimated by AdQSM and the reference value were 0.94 and 0.86. We used the trunk volume calculated by the allometric equation as a reference value to test the accuracy of AdQSM. The trunk volume was estimated based on AdQSM, and its bias was 0.07066 m3, rBias was 18.73%, RMSE was 0.12369 m3, rRMSE was 32.78%. To better evaluate the accuracy of QSM’s reconstruction of the trunk volume, we compared AdQSM and TreeQSM in the same dataset. The bias of the trunk volume estimated based on TreeQSM was −0.05071 m3, and the rBias was −13.44%, RMSE was 0.13267 m3, rRMSE was 35.16%. At 95% confidence interval level, the concordance correlation coefficient (CCC = 0.77) of the agreement between the estimated tree trunk volume of AdQSM and the reference value was greater than that of TreeQSM (CCC = 0.60). The significance of this research is as follows: (1) The automatic modeling method based on AdQSM is developed, which expands the application scope of AdQSM; (2) provide low-cost photogrammetric point cloud as the input data of AdQSM; (3) explore the potential of AdQSM to reconstruct forest terrestrial photogrammetric point clouds.

scholarly journals The Effect of Material Properties on the Perceived Shape of Three-Dimensional Objects

i-Perception ◽  
2020 ◽  
Vol 11 (6) ◽  
pp. 204166952098231
Author(s):  
Masakazu Ohara ◽  
Juno Kim ◽  
Kowa Koida
Keyword(s):  
Material Properties ◽  
Regional Variation ◽  
Three Dimensional ◽  
Mean Square ◽  
Viewing Condition ◽  
Three Dimensional Objects ◽  
Transparent Objects ◽  
Dimensional Shape ◽  
Local Root ◽  
Three Dimensional Shape

Perceiving the shape of three-dimensional objects is essential for interacting with them in daily life. If objects are constructed from different materials, can the human visual system accurately estimate their three-dimensional shape? We varied the thickness, motion, opacity, and specularity of globally convex objects rendered in a photorealistic environment. These objects were presented under either dynamic or static viewing condition. Observers rated the overall convexity of these objects along the depth axis. Our results show that observers perceived solid transparent objects as flatter than the same objects rendered with opaque reflectance properties. Regional variation in local root-mean-square image contrast was shown to provide information that is predictive of perceived surface convexity.

scholarly journals Rapid Biochemical Methane Potential Evaluation of Anaerobic Co-Digestion Feedstocks Based on Near Infrared Spectroscopy and Chemometrics

Energies ◽  
2021 ◽  
Vol 14 (5) ◽  
pp. 1460
Author(s):  
Jinming Liu ◽  
Changhao Zeng ◽  
Na Wang ◽  
Jianfei Shi ◽  
Bo Zhang ◽  
...  
Keyword(s):  
Infrared Spectroscopy ◽  
Variable Selection ◽  
Root Mean Square Error ◽  
Least Squares ◽  
Mean Square Error ◽  
Near Infrared Spectroscopy ◽  
Near Infrared ◽  
Mean Square ◽  
Biochemical Methane Potential ◽  
Methane Potential

Biochemical methane potential (BMP) of anaerobic co-digestion (co-AD) feedstocks is an essential basis for optimizing ratios of materials. Given the time-consuming shortage of conventional BMP tests, a rapid estimated method was proposed for BMP of co-AD—with straw and feces as feedstocks—based on near infrared spectroscopy (NIRS) combined with chemometrics. Partial least squares with several variable selection algorithms were used for establishing calibration models. Variable selection methods were constructed by the genetic simulated annealing algorithm (GSA) combined with interval partial least squares (iPLS), synergy iPLS, backward iPLS, and competitive adaptive reweighted sampling (CARS), respectively. By comparing the modeling performances of characteristic wavelengths selected by different algorithms, it was found that the model constructed using 57 characteristic wavelengths selected by CARS-GSA had the best prediction accuracy. For the validation set, the determination coefficient, root mean square error and relative root mean square error of the CARS-GSA model were 0.984, 6.293 and 2.600, respectively. The result shows that the NIRS regression model—constructed with characteristic wavelengths, selected by CARS-GSA—can meet actual detection requirements. Based on a large number of samples collected, the method proposed in this study can realize the rapid and accurate determination of the BMP for co-AD raw materials in biogas engineering.

Sign in / Sign up

Export Citation Format

Share Document