SCANNER DESIGN SPECIFICITY FOR HELMET-MOUNTED TARGETING SYSTEM

2021 ◽  
Vol 156 (1) ◽  
pp. 29-37
Author(s):  
Volodymyr SENATOROV ◽  
Svitlana GLAZKOWA
Keyword(s):  
Angular Position ◽  
Design Principles ◽  
Geometric Parameters ◽  
The Other ◽  
Field Of View ◽  
Scanning Process ◽  
Counterclockwise Direction ◽  
Triangulation Method ◽  
Targeting Accuracy

Following design principles are important for helmet-mounted targeting systems. Two scanners on base of the polygonal reflector-type prisms forming the fanned field of view are fastened to head-up display. Three LEDs installed on pilot helmet form a plane, the normal of which is collinear to helmet indi-cator viewing line. Angles of LED bearings are measured with triangulation method and angular position of viewing line is calculat-ed. Two options for organization of scanning process are analyzed in the paper. In the first variant, one prism rotates in clockwise and the other in counterclockwise direction. In the second variant both prisms rotate in the same direction, clockwise for example. It is shown that if the prisms rotate in the same direction the targeting accuracy is greater. The algorithm developed for determination of targeting accuracy may be used to matching the rate of scanning and geometric parameters of helmet-mounted targeting system at prescribed accuracy of targeting.

Determination of the lattice translation across {110} APBs in GaAs

1988 ◽  
Vol 46 ◽  
pp. 600-601
Author(s):  
D.R. Rasmussen ◽  
N.-H. Cho ◽  
C.B. Carter
Keyword(s):  
Grain Boundaries ◽  
Lower Energy ◽  
Antiphase Boundary ◽  
The Other ◽  
Boundary Structure ◽  
Interface Plane ◽  
Inversion Symmetry ◽  
High Angle ◽  
Equilibrium Distance

Domains in GaAs can exist which are related to one another by the inversion symmetry, i.e., the sites of gallium and arsenic in one domain are interchanged in the other domain. The boundary between these two different domains is known as an antiphase boundary [1], In the terminology used to describe grain boundaries, the grains on either side of this boundary can be regarded as being Σ=1-related. For the {110} interface plane, in particular, there are equal numbers of GaGa and As-As anti-site bonds across the interface. The equilibrium distance between two atoms of the same kind crossing the boundary is expected to be different from the length of normal GaAs bonds in the bulk. Therefore, the relative position of each grain on either side of an APB may be translated such that the boundary can have a lower energy situation. This translation does not affect the perfect Σ=1 coincidence site relationship. Such a lattice translation is expected for all high-angle grain boundaries as a way of relaxation of the boundary structure.

Determination of the Burgers vector of a dislocation in a Fe-Mn alloy by weak-beam image in HVEM

1978 ◽  
Vol 36 (1) ◽  
pp. 330-331
Author(s):  
Y. Ishida ◽  
H. Ishida ◽  
K. Kohra ◽  
H. Ichinose
Keyword(s):  
High Order ◽  
Simulation Technique ◽  
The Other ◽  
Image Simulation ◽  
Diffraction Vector ◽  
Burgers Vector ◽  
Weak Beam ◽  
Beam Image ◽  
Edge Component

IntroductionA simple and accurate technique to determine the Burgers vector of a dislocation has become feasible with the advent of HVEM. The conventional image vanishing technique(1) using Bragg conditions with the diffraction vector perpendicular to the Burgers vector suffers from various drawbacks; The dislocation image appears even when the g.b = 0 criterion is satisfied, if the edge component of the dislocation is large. On the other hand, the image disappears for certain high order diffractions even when g.b ≠ 0. Furthermore, the determination of the magnitude of the Burgers vector is not easy with the criterion. Recent image simulation technique is free from the ambiguities but require too many parameters for the computation. The weak-beam “fringe counting” technique investigated in the present study is immune from the problems. Even the magnitude of the Burgers vector is determined from the number of the terminating thickness fringes at the exit of the dislocation in wedge shaped foil surfaces.

Procedures for the Quantitative Determination of Autoprothrombin C

1962 ◽  
Vol 08 (03) ◽  
pp. 434-441 ◽  
Author(s):  
Edmond R Cole ◽  
Ewa Marciniak ◽  
Walter H Seegers
Keyword(s):  
Quantitative Determination ◽  
Plasma Sample ◽  
Quantitative Measure ◽  
The Other ◽  
Clotting Time ◽  
Bovine Plasma ◽  
Autoprothrombin C

SummaryTwo quantitative procedures for autoprothrombin C are described. In one of these purified prothrombin is used as a substrate, and the activity of autoprothrombin C can be measured even if thrombin is in the preparation. In this procedure a reaction mixture is used wherein the thrombin titer which develops in 20 minutes is proportional to the autoprothrombin C in the reaction mixture. A unit is defined as the amount which will generate 70 units of thrombin in the standardized reaction mixture. In the other method thrombin interferes with the result, because a standard bovine plasma sample is recalcified and the clotting time is noted. Autoprothrombin C shortens the clotting time, and the extent of this is a quantitative measure of autoprothrombin C activity.

Determination of Factor XIII Activity and of Factor XIII Inhibitors Using an Ammonium-Sensitive Electrode

1983 ◽  
Vol 50 (02) ◽  
pp. 563-566 ◽  
Author(s):  
P Hellstern ◽  
K Schilz ◽  
G von Blohn ◽  
E Wenzel
Keyword(s):  
Factor Xiii ◽  
Normal Subjects ◽  
The Other ◽  
Activity Measurement ◽  
Factor Xiii Deficiency ◽  
Assay Procedure ◽  
Stabilization Factor ◽  
Release Method ◽  
Sensitive Electrode

SummaryAn assay for rapid factor XIII activity measurement has been developed based on the determination of the ammonium released during fibrin stabilization. Factor XIII was activated by thrombin and calcium. Ammonium was measured by an ammonium-sensitive electrode. It was demonstrated that the assay procedure yields accurate and precise results and that factor XIII-catalyzed fibrin stabilization can be measured kinetically. The amount of ammonium released during the first 90 min of fibrin stabilization was found to be 7.8 ± 0.5 moles per mole fibrinogen, which is in agreement with the findings of other authors. In 15 normal subjects and in 15 patients suffering from diseases with suspected factor XIII deficiency there was a satisfactory correlation between the results obtained by the “ammonium-release-method”, Bohn’s method, and the immunological assay (r1 = 0.65; r2= 0.70; p<0.01). In 3 of 5 patients with paraproteinemias the values of factor XIII activity determined by the ammonium-release method were markedly lower than those estimated by the other methods. It could be shown that inhibitor mechanisms were responsible for these discrepancies.

PENENTUAN KRITERIA PENILAIAN KESAN JUMLAH LEUKOSIT PADA PEMERIKSAAN APUSAN DARAH TEPI

2018 ◽  
Vol 3 (2) ◽  
pp. 52-61
Author(s):  
Dzikra Arwie ◽  
Islawati
Keyword(s):  
Data Analysis ◽  
Statistical Analysis ◽  
Blood Cells ◽  
Blood Smear ◽  
White Blood Cells ◽  
Peripheral Blood Smear ◽  
Field Of View ◽  
Laboratory Observation ◽  
Number Of Cells

Leukocytes or white blood cells have a characteristic characteristic of different cells. Determination of the impression of the number of leukocytes is determined in the number of cells in the field of view. While the number of viewable field cells expressed is still quite varied. The purpose of this study was to determine the number of leukocytes in the field of view and expressed the impression of a sufficient amount. This research was conducted at the Laboratory of Health Analyst Department Panrita Husada Bulukumba on 9 April 2017 to 14 July 2017. This type of research is a laboratory observation that aims to determine the criteria for assessing the impression of the number of leukocytes on a peripheral blood smear. Data analysis using statistical analysis is the average and standard deviations to determine the impression of the number of leukocytes and use 3 inspection zones. The results of this study obtained results in zone IV the number of leukocyte impressions said to be sufficient was 7-10, in zone V the number of leukocyte impressions said to be sufficient was 4-9, and in zone VI the number of leukocyte impressions said to be sufficient was 3-8.  

Determination of the Number of Conserved Chromosomal Segments Between Species

Genetics ◽  
2001 ◽  
Vol 157 (3) ◽  
pp. 1387-1395 ◽  
Author(s):  
Sudhir Kumar ◽  
Sudhindra R Gadagkar ◽  
Alan Filipski ◽  
Xun Gu
Keyword(s):  
Statistical Approach ◽  
Common Ancestor ◽  
Chromosomal Rearrangements ◽  
Structural Similarity ◽  
The Other ◽  
Segment Length ◽  
Human Genomes ◽  
Genomic Divergence ◽  
Human And Mouse

AbstractGenomic divergence between species can be quantified in terms of the number of chromosomal rearrangements that have occurred in the respective genomes following their divergence from a common ancestor. These rearrangements disrupt the structural similarity between genomes, with each rearrangement producing additional, albeit shorter, conserved segments. Here we propose a simple statistical approach on the basis of the distribution of the number of markers in contiguous sets of autosomal markers (CSAMs) to estimate the number of conserved segments. CSAM identification requires information on the relative locations of orthologous markers in one genome and only the chromosome number on which each marker resides in the other genome. We propose a simple mathematical model that can account for the effect of the nonuniformity of the breakpoints and markers on the observed distribution of the number of markers in different conserved segments. Computer simulations show that the number of CSAMs increases linearly with the number of chromosomal rearrangements under a variety of conditions. Using the CSAM approach, the estimate of the number of conserved segments between human and mouse genomes is 529 ± 84, with a mean conserved segment length of 2.8 cM. This length is &lt;40% of that currently accepted for human and mouse genomes. This means that the mouse and human genomes have diverged at a rate of ∼1.15 rearrangements per million years. By contrast, mouse and rat are diverging at a rate of only ∼0.74 rearrangements per million years.

scholarly journals Determination of the Height of Hard X-Ray Sources in the Solar Atmosphere by Measurement of Photospheric Albedo Photons

1975 ◽  
Vol 68 ◽  
pp. 239-241
Author(s):  
John C. Brown ◽  
H. F. Van Beek
Keyword(s):  
Solar Atmosphere ◽  
The Other ◽  
X Ray ◽  
Theoretical Predictions ◽  
Source Models ◽  
The One

SummaryThe importance and difficulties of determining the height of hard X-ray sources in the solar atmosphere, in order to distinguish source models, have been discussed by Brown and McClymont (1974) and also in this Symposium (Brown, 1975; Datlowe, 1975). Theoretical predictions of this height, h, range between and 105 km above the photosphere for different models (Brown and McClymont, 1974; McClymont and Brown, 1974). Equally diverse values have been inferred from observations of synchronous chromospheric EUV bursts (Kane and Donnelly, 1971) on the one hand and from apparently behind-the-limb events (e.g. Datlowe, 1975) on the other.

Determination of Sulfaquinoxaline, Sulfathiazole, Sulfamerazine, and Sulfamethazine in Feed Concentrates or Premixes

1973 ◽  
Vol 56 (6) ◽  
pp. 1475-1479 ◽  
Author(s):  
Ugo R Cieri
Keyword(s):  
Silica Gel ◽  
The Other ◽  
Uv Absorbance ◽  
The Individual

Abstract Sulfaquinoxaline is determined by its UV absorbance at about 358 nm, where the other 3 sulfonamides do not absorb. Sulfathiazole, sulfamerazine, and sulfamethazine are determined by a quantitative TLC procedure, based on the separation of the compounds on silica gel plates; the spots are extracted and the centrifuged extracts are analyzed spectro-photometrically. A method of calculating the total sulfonamide content, independent of the individual components, is also introduced.

scholarly journals Determination of Fertility-Related Traits in Muscadine Grape Population

Plants ◽  
2021 ◽  
Vol 10 (6) ◽  
pp. 1175
Author(s):  
Jiovan Campbell ◽  
Pranavkumar Gajjar ◽  
Ahmed Ismail ◽  
Fariborz Habibi ◽  
Ahmed G. Darwish ◽  
...  
Keyword(s):  
Fruit Set ◽  
The Other ◽  
Average Yield ◽  
Number Of Clusters ◽  
Breeding Lines ◽  
Muscadine Grape

In this study, fertility-related traits of 90 muscadine grape genotypes were evaluated. Selected genotypes included 21 standard cultivars, 60 breeding lines, and nine Vitis × Muscadinia hybrids (VM hybrids). The first fruiting bud (FFB), bud fertility (BF), bud fertility coefficient (BFC), number of flowers/flower cluster (N.F/FC), fruit-set efficiency (FSE), number of clusters/vine (N.C/V), and yield/vine (Y/V) traits were evaluated. The FFB trait did not show significant differences among genotypes. The muscadine genotype O28-4-2-2 (1.6 ± 0.2) displayed the FFB closest to the base; however, O17-16-2-1, O18-2-1, and VM A12-10-2 genotypes had the most distant FFB (3.6 ± 0.3). All the other fertility-related traits varied widely among the population. The BF, BFC, N.F/FC, FSE, N.C/V, and Y/V exhibited a range estimated at 35.1%, 81.5%, 259.7, 63.3%, 177 C/V, and 22.3 kg/V, respectively. The muscadine genotypes O42-3-1 (36.7% ± 1.3) and Majesty (34% ± 1.2) exhibited the highest BF; however, the VM A12-10-2 (1.6% ± 0.1) recorded the lowest BF. The VM genotype O15-16-1 (82.8% ± 4.1) displayed the highest BFC; however, the VM A12-10-2 (1.3% ± 0.1) showed the lowest BFC. The muscadine genotypes D7-1-1 (280.3 F/FC ± 21.7) and O17-17-1 (20.7 F/FC ± 5.5) showed the highest and lowest N.F/FC, respectively. The maximum and minimum FSE was observed for the Rosa cultivar (65.7% ± 2.4) and muscadine genotype D7-1-1 (2.4% ± 0.2), respectively. The minimum N.C/V was recorded for VM genotype A12-10-2 (6 C/V ± 0.2) and maximum noted for muscadine genotypes B20-18-2 (183 C/V ± 7.5) and O44-14-1 (176 C/V ± 7.3). Muscadine genotype O23-11-2 (22.6 kg ± 1.1) produced the highest Y/V; however, the lowest yield was recorded for O15-17-1, Fry Seedless, Sugargate, and the VM genotypes and A12-10-2, with an average yield among them estimated at 0.4 kg ± 0.2.

III. An experimental determination of the velocity of sound

1872 ◽  
Vol 20 (130-138) ◽  
pp. 34-35
Keyword(s):  
Experimental Determination ◽  
Cape Town ◽  
The Other ◽  
Velocity Of Sound ◽  
Successful Operation ◽  
Single Wire ◽  
Galvanic Current ◽  
Royal Observatory ◽  
Port Elizabeth

A galvanic current passes from the batteries at the Royal Observatory, Cape Town, at 1 o’clock, and discharges a gun at the Castle, and through relays drops a time-ball at Port Elizabeth. It appeared to the author that a valuable determination of the velocity of sound might be obtained by measuring upon the chronograph of the Observatory the interval between the time of the sound reaching some point near the gun and that of its arrival at the Observatory. As there is only a single wire between the Observatory and Cape Town, some little difficulty was experienced in making the necessary arrangements, without any interference with the 1 o’clock current to Port Elizabeth; but this difficulty was overcome by a plan which the author describes, and which was brought into successful operation on Feb. 27, 1871. The experiments could not have been carried out, on account of the encroachment they would have made on the time of the Observatory staff, had it not been for the assistance of J. Den, Esq., the acting manager of the Cape Telegraph Company, to whom the author is indebted for the preparation of a good earth-connexion near the gun, for permission to Mr. Kirby, a gentleman attached to the telegraph office, to assist in the experiments, and for a general superintendence of the arrangements at Cape Town. The observed times of hearing the sound were recorded on the chronograph by two observers, situated one (Mr. Kirby) at a distance of 641 feet from the gun, the other (Mr. Mann) at the Observatory, at a distance of 15,449 feet from the gun. The former distance was sufficient to allow the connexion of the main wire to be broken at the telegraph office after the gun had been fired, but before the sound reached the first observer.

Sign in / Sign up

Export Citation Format

Share Document