scholarly journals Resource Recovery from Industrial Effluents Containing Precious Metal Species Using Low-Cost Biomaterials — An Approach of Passive Bioremediation and Its Newer Applications

10.5772/56965 ◽  
2013 ◽  
Author(s):  
Nilisha Itankar ◽  
Viraja Bhat ◽  
Jayati Chourey ◽  
Ketaki Barve ◽  
Shilpa Kulkarni ◽  
...  
Keyword(s):  
Precious Metal ◽  
Low Cost ◽  
Industrial Effluents ◽  
Resource Recovery ◽  
Metal Species

scholarly journals Ironmaking and Steelmaking Slags as Sustainable Adsorbents for Industrial Effluents and Wastewater Treatment: A Critical Review of Properties, Performance, Challenges and Opportunities

2020 ◽  
Vol 12 (5) ◽  
pp. 2118 ◽  
Author(s):  
James Manchisi ◽  
Elias Matinde ◽  
Neil A. Rowson ◽  
Mark J. H. Simmons ◽  
Geoffrey S. Simate ◽  
...  
Keyword(s):  
Low Cost ◽  
Chemical Properties ◽  
Toxic Metal ◽  
Industrial Effluents ◽  
Metal Species ◽  
Adsorption Sites ◽  
Post Process ◽  
Steelmaking Slags ◽  
Challenges And Opportunities ◽  
Performance Challenges

This paper critically discusses the structure, properties and applications of ironmaking and steelmaking slags and their silicate-based variants as low-cost adsorbents for removing cations and anions from industrial effluents and wastewater. Undoubtedly, the performance of slag-based adsorbents depends on their physical, chemical and phase chemical properties. The presence of crystalline phases, for example, has a significant effect on the adsorption capacity. However, despite their low cost and ubiquity, their chemical and geometric heterogeneity significantly affects the performance and applications of slag-based adsorbents. These challenges notwithstanding, the efficacy of slag-based adsorbents can be significantly enhanced through purposeful activation to increase the specific surface area and density of adsorption sites on the surfaces of adsorbent particles. The synthesis of functionalised adsorbents such as geopolymers, zeolites and layered double hydroxides from silicate and aluminosilicate precursors can also significantly increase the performance of slag-based adsorbents. In addition, the ability to stabilise the dissolved and/or entrained toxic metal species in stable phases in slags, either through controlled post-process fluxing or crystallisation, can significantly enhance the environmental performance of slag-based adsorbents. Most critical in the design of future slag-based adsorbents is the integration of the engineered properties of molten and solidified slags to the recovery and stabilisation of dissolved and/or entrained metals.

Tailoring the Co4+/Co3+ active sites in single perovskite as a bifunctional catalyst for oxygen electrode reactions "

2021 ◽  
Author(s):  
Song-Jeng Isaac Huang ◽  
Adil Muneeb ◽  
Sabhapathy Palani ◽  
Anjaiah Sheelam ◽  
Bayikadi Khasimsaheb ◽  
...  
Keyword(s):  
Oxygen Evolution Reaction ◽  
Precious Metal ◽  
Active Sites ◽  
Low Cost ◽  
Bifunctional Catalyst ◽  
Oxygen Electrode ◽  
Reduction Reaction ◽  
New Class ◽  
Electrode Reactions ◽  
Energy Conversion Devices

Developing a non-precious metal electrocatalyst for oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) is desirable for low-cost energy conversion devices. Herein, we designed and developed a new class...

scholarly journals Mechanisms and adsorption capacities of biochar for the removal of organic and inorganic pollutants from industrial wastewater

2020 ◽  
Author(s):  
T. G. Ambaye ◽  
M. Vaccari ◽  
E. D. van Hullebusch ◽  
A. Amrane ◽  
S. Rtimi
Keyword(s):  
Organic Contaminants ◽  
Pyrolysis Temperature ◽  
Low Cost ◽  
Industrial Effluents ◽  
Economic Benefits ◽  
Inorganic Pollutants ◽  
Solution Ph ◽  
Adsorption Mechanisms ◽  
Adsorption Capacities ◽  
Temperature Solution

AbstractCurrently, due to the rapid growth of urbanization and industrialization in developing countries, a large volume of wastewater is produced from industries that contain chemicals generating high environmental risks affecting human health and the economy if not treated properly. Consequently, the development of a sustainable low-cost wastewater treatment approach has attracted more attention of policymakers and scientists. The present review highlights the recent applications of biochar in removing organic and inorganic pollutants present in industrial effluents. The recent modes of preparation, physicochemical properties and adsorption mechanisms of biochar in removing organic and inorganic industrial pollutants are also reviewed comprehensively. Biochar showed high adsorption of industrial dyes up to 80%. It also discusses the recent application and mechanism of biochar-supported photocatalytic materials for the degradation of organic contaminants in wastewater. We reviewed also the possible optimizations (such as the pyrolysis temperature, solution pH) allowing the increase of the adsorption capabilities of biochar leading to organic contaminants removal. Besides, increasing the pyrolysis temperature of the biochar was seen to lead to an increase in its surface area, while it decreases their amount of oxygen-containing functional groups, consequently leading to a decrease in the adsorption of metal (loid) ions present in the medium. Finally, the review suggests that more research should be carried out to optimize the main parameters involved in biochar production and its regeneration methods. Future efforts should be also carried out towards process engineering to improve its adsorption capacity to increase the economic benefits of its implementation.

Photocatalytic Degradation of Synthetic Sulfur Pollutants in Petroleum Fractions under Different pH and Photocatalyst

2021 ◽  
Vol 02 (01) ◽  
Author(s):  
Mohamad Alif Hakimi Hamdan ◽  
◽  
Nur Hanis Hayati Hairom ◽  
Nurhafisza Zaiton ◽  
Zawati Harun ◽  
...  
Keyword(s):  
Photocatalytic Degradation ◽  
Zno Nanoparticles ◽  
Low Cost ◽  
Industrial Effluents ◽  
Degradation Process ◽  
Vital Role ◽  
Petroleum Fraction ◽  
Precipitation Method ◽  
Synthesis Process ◽  
Petroleum Fractions

Thiophene is one of the sulfur compounds in the petroleum fraction that can be harmful to living things and lead to a critical effect on the ecosystem. Photocatalytic degradation is one of the promising methods in treating wastewater as it can mineralization of pollutants into carbon dioxide and water. Other than that, this method is non-toxic and relatively low cost. The production of hydroxyl radicals playing a vital role in the degradation of organic pollutants. It has been claimed that the usage of zinc oxide (ZnO) nanoparticles could give an excellent degradation process as this photocatalyst have high photosensitivity, low cost and chemically stable. However, the preparation method of ZnO nanoparticles will affect the agglomeration, particle size, shape and morphology of particles and lead to influence the photocatalytic activity in degrading thiophene. Therefore, this study focused on the effectiveness of ZnO nanoparticles in the presence of fibrous nanosilica (KCC-1) and polyethylene glycol (PEG) as the capping agent to degrade synthetic thiophene. ZnO/KCC-1 had been synthesized via the precipitation method and characterized by using Fourier Transform Infrared (FTIR). The chemical bond and nature of the photocatalyst from the FTIR results proved that the synthesis process to produce the ZnO/KCC-1 was succeed. The large surface area of KCC-1 increases the effectiveness of ZnO which is supported by the experimental data. Accordingly, the optimum condition for photocatalytic degradation of thiophene is under pH 7 by using ZnO/KCC-1 as photocatalyst. Hence, it is believed that this research could be implemented to remove the thiophene in petroleum fraction from the actual industrial effluents and this can preserve nature in the future.

scholarly journals Phosphate and Ammonium Removal from Wastewaters Using Natural-Based Innovative Bentonites Impacting on Resource Recovery and Circular Economy

Molecules ◽  
2021 ◽  
Vol 26 (21) ◽  
pp. 6684
Author(s):  
Miltiadis Zamparas ◽  
Grigorios L. Kyriakopoulos ◽  
Marios Drosos ◽  
Vasilis C. Kapsalis
Keyword(s):  
Circular Economy ◽  
Low Cost ◽  
Resource Recovery ◽  
Sem Analysis ◽  
Langmuir Model ◽  
Treated Wastewater ◽  
Ammonium Removal ◽  
Different Types ◽  
Long Time ◽  
Ph Range

The research objective of the study is the estimation of a novel low-cost composite material f-MB (Fe-modified bentonite) as a P and N adsorbent from wastewaters. Τhe present study aimed at examining the phosphate and ammonium removal efficiency from different types of wastewater using f-MB, by conducting bench-scale batch experiments to investigate its equilibrium characteristics and kinetics. The SEM analysis revealed that the platelets of bentonite in f-MB do not form normal bentonite sheets, but they have been restructured in a more compact formation with a great porosity. Regarding the sorption efficiencies (Qm), the maximum phosphate sorption efficiencies (Qm) calculated using the Langmuir model were 24.54, 25.09, 26.13, 24.28, and 23.21 mg/g, respectively, for a pH range of 5 to 9. In addition, the maximum NH4+-N adsorption capacities (Qm) calculated from the Langmuir model were 131.8, 145.7, 168.5, 156.7, and 159.6 mg/g, respectively, for a pH range from 5 to 9. Another important finding of this study is that f-MB can recover P from treated wastewater impacting on resource recovery and circular economy (CE). The modified clay f-MB performed the phosphate and ammonium recovery rates of 80% and 78.5%, respectively. Finally, f-MB can slowly release the largest proportion of phosphate and ammonium ions for a long time, thus extending the application of the f-MB material as a slow-release fertilizer and soil improver.

scholarly journals Removal of orthophosphates in water by modified carbonate material of biological origin

2017 ◽  
Author(s):  
Marco Tadeu Gomes Vianna ◽  
Marcia Marques
Keyword(s):  
Exotic Species ◽  
Removal Efficiency ◽  
Low Cost ◽  
Industrial Effluents ◽  
Water Bodies ◽  
Raw Material ◽  
Biological Origin ◽  
Chemically Modified ◽  
Removal Capacity ◽  
P Removal

The excessive release of phosphorus (P) by discharge of domestic and industrial effluents is directly associated with the eutrophication of water bodies. Therefore, an efficient removal of P from effluents is required. The method most commonly used for P removal from wastewater is chemical precipitation. However, this technique is relatively expensive and demands a proper disposal for the sludge. Therefore, the development of new materials with low cost but high P removal efficiency has been investigated. The introduction of exotic species in aquatic environments is considered a serious environmental problem in different parts of the world. Considering that, many of these species have high concentrations of carbonates in their exoskeleton composition, which is potentially useful in water treatment, particularly for P removal the use of such material as adsorbent has been tested. The present study aimed to investigate the capacity of the exoskeleton of exotic species in powder form to remove orthophosphates from water comparing the raw material (RCS), with physically modified (CSA) and chemically modified (CSC) material. To study the orthophosphates removal efficiency, a factorial design with central composite rotational design (CCRD) was applied. In order to optimize the P removal, the influence of the independent variables adsorbent/adsorbate ratio, pH and temperature was investigated with the kinetic control associate at each configuration obtained by CCRD. The P removal capacity of RCS varied from 125.0 mgP kg-1 to 1002.5 mgP kg-1; the removal capacity of CSA varied from 237.5 mgP kg-1 to 1540.0 mgP kg-1. The removal capacity of CSC varied from 5212.5 mgP kg-1 to 12672.5 mgP kg-1. Based on the preliminary results, the exoskeleton powder showed to be a potentially sustainable alternative as adsorbent material (mostly the chemically modified form CSC) useful in several applications, such as the treatment of urban and industrial wastewaters to prevent eutrophication of water bodies and population control of exotic species due to the commercial exploitation. 

A Low-cost 2D WO3/Ni3S2 heterojunctions for highly stable hydrogen evolution

2021 ◽  
Author(s):  
Minmin Wang ◽  
Tongming Sun ◽  
Weiting Zhong ◽  
Mengke Zhang ◽  
Jin Wang ◽  
...  
Keyword(s):  
Transition Metal ◽  
Hydrogen Evolution ◽  
Tungsten Trioxide ◽  
Precious Metal ◽  
Low Cost ◽  
Metal Catalysts ◽  
Precious Metal Catalysts ◽  
Hydrogen Evolution Reactions

Transition metal-based nanohybrid has recently been demonstrated an electrocatalyst which show great potential to replace commercial precious metal catalysts in hydrogen evolution reactions. Herein, tungsten trioxide/nickel disulfide (WO3/Ni3S2) heterojunction is...

High topological tri-metal phosphide of CoP@FeNiP toward enhanced activities in oxygen evolution reaction

Nanoscale ◽  
2021 ◽  
Author(s):  
Jianzhi Wang ◽  
Chen Chen ◽  
Ning Cai ◽  
Miao Wang ◽  
Hui Li ◽  
...  
Keyword(s):  
High Activity ◽  
Oxygen Evolution ◽  
Oxygen Evolution Reaction ◽  
Precious Metal ◽  
Low Cost ◽  
Metal Phosphide

The development of non-precious metal electrocatalysts with high activity, good durability and low cost to replace precious metal electrocatalysts is highly demanded for oxygen evolution reaction (OER).

Al-doped nickel sulfide nanosheet arrays as highly efficient bifunctional electrocatalysts for overall water splitting

Nanoscale ◽  
2020 ◽  
Vol 12 (47) ◽  
pp. 24244-24250
Author(s):  
Wenjun He ◽  
Fangqing Wang ◽  
Dongbo Jia ◽  
Ying Li ◽  
Limin Liang ◽  
...  
Keyword(s):  
High Activity ◽  
Water Splitting ◽  
Precious Metal ◽  
Nickel Sulfide ◽  
Low Cost ◽  
Water Electrolysis ◽  
Overall Water Splitting ◽  
Bifunctional Electrocatalysts ◽  
Nanosheet Arrays ◽  
Production Of Hydrogen

The development of low-cost, high-activity, durable non-precious metal bifunctional electrocatalysts is of great importance in the production of hydrogen by water electrolysis.

Sign in / Sign up

Export Citation Format

Share Document