scholarly journals Functional Textile for Active Wear Clothing

2021 ◽  
Author(s):  
Ramratan Guru ◽  
Anupam Kumar ◽  
Rohit Kumar
Keyword(s):  
Water Vapour ◽  
Concentration Level ◽  
Water Vapour Permeability ◽  
Comfort Level ◽  
Drying Rate ◽  
Knitted Fabrics ◽  
Vapour Permeability ◽  
Moisture Management ◽  
Knit Fabrics ◽  
Antimicrobial Performance

Moisture management property is an important aspect of any fabric meant for active wear fabric, which decides the comfort level of that fabric specially used as active wear garments. Regular physical activity is important to maintain consistency in human health. To achieve comfort and functional support during various activities such as walking, stretching, jogging etc., athletes and sports persons use active wear clothing. A fabric’s moisture management performance is also influenced by its air and water vapour permeability. The moisture management finish (MMF) and Antimicrobial finish (AMF) have been used to increase moisture absorbency; improves wetting, wicking action and antimicrobial performance. In this study, influence of MMF and AMF finishes on the moisture management property of different knitted active wear fabrics had been carried out. For the study two different knit fabrics of 100% Polyester and 100% Nylon with three different GSM levels (100, 130 and 160) has been selected. Further two varieties of commercially available functional fabric finishes have been also taken for the study. The result shows that in case of finished fabric at certain concentration level, as the fabric GSM increases the value of Accumulative one-way transport index (OWTI) %, water vapour permeability but same time drying rate increases. The result shows that in case of finished fabric at certain concentration level, as the fabric GSM increases the value of accumulative one-way transport index (OWTI) %, water vapour permeability decreases but same time drying rate increases. The knitted fabrics of 100% Polyester and 100% Nylon composition follow the similar trend. Further with the increase of fabric finish concentration level, OWTI %, and water vapour permeability (WVP) factor decreases while the drying rate increases.

Some Studies on the Moisture Management Properties of Cotton and Bamboo Yarn Knitted Fabrics

2015 ◽  
Vol 1134 ◽  
pp. 225-230 ◽  
Author(s):  
Nadhirah Mohd Amran ◽  
Mohd Rozi Ahmad ◽  
Mohamad Faizul Yahya ◽  
Amily Fikry ◽  
Ahmad Munir Che Muhamed ◽  
...  
Keyword(s):  
Water Vapour ◽  
Air Permeability ◽  
Water Vapour Permeability ◽  
Water Penetration ◽  
Knitted Fabrics ◽  
Vapour Permeability ◽  
Spreading Area ◽  
Moisture Management ◽  
Management Capability ◽  
Cotton Yarns

This paper reports on the moisture management properties of fabrics made from yarns of 100% cotton, 100% bamboo and combination of bamboo and cotton yarns. The fabrics were knitted on a circular knitting machine and scoured before measuring them for moisture management capability, air permeability and water vapour permeability. The results showed that all fabrics have good overall moisture management capability which classified them as water penetration fabric with small spreading area. The fabric consisting of the combination of bamboo and cotton yarns of 83/17 ratio gave the highest air and water vapour permeability.

Thermal comfort properties of bamboo tencel knitted fabrics

2016 ◽  
Vol 28 (4) ◽  
pp. 420-428 ◽  
Author(s):  
Govindan Karthikeyan ◽  
Govind Nalankilli ◽  
O L Shanmugasundaram ◽  
Chidambaram Prakash
Keyword(s):  
Thermal Comfort ◽  
Water Vapour ◽  
Air Permeability ◽  
Water Vapour Permeability ◽  
Knitted Fabrics ◽  
Vapour Permeability ◽  
Content Type ◽  
Moisture Management ◽  
Thermal Comfort Properties ◽  
Single Jersey

Purpose – The purpose of this paper is to present the thermal comfort properties of single jersey knitted fabric structures made from bamboo, tencel and bamboo-tencel blended yarns. Design/methodology/approach – Bamboo, tencel fibre and blends of the two fibres were spun into yarns of identical linear density (30s Ne). Each of the blended yarns so produced was converted to single jersey knitted fabrics with loose, medium and tight structures. Findings – An increase in tencel fibre in the fabric had led to a reduction in fabric thickness and GSM. Air permeability and water-vapour permeability also increased with increase in tencel fibre content. The anticipated increase in air permeability and relative water vapour permeability with increase in stitch length was observed. The thermal conductivity of the fabrics was generally found to increase with increase in the proportion of bamboo. Research limitations/implications – It is clear from the foregoing that, although a considerable amount of work has been done on bamboo blends and their properties, still there are many gaps existing in the literature, in particular, on thermal comfort, moisture management and spreading characteristics. Thus the manuscript addresses these issues and provides valuable information on the comfort characteristics of the blended fabrics for the first time. In the evolution of this manuscript, it became apparent that a considerable amount of work was needed to fill up the gaps existing in the literature and hence this work which deals with an investigation of the blend yarn properties and comfort properties of knitted fabrics was taken up. Originality/value – This research work is focused on the thermal comfort parameters of knitted fabrics made from 100 per cent tencel yarn, 100 per cent bamboo yarn and tencel/bamboo blended yarns of different blend ratios.

Thermo-physiological properties of 3D spacer knitted fabrics

2016 ◽  
Vol 28 (3) ◽  
pp. 328-339 ◽  
Author(s):  
Rajesh Mishra ◽  
Arumugam Veerakumar ◽  
Jiri Militky
Keyword(s):  
Thermal Conductivity ◽  
Water Vapour ◽  
Air Permeability ◽  
Water Vapour Permeability ◽  
Knitted Fabrics ◽  
Vapour Permeability ◽  
Content Type ◽  
Spacer Fabric ◽  
Multifilament Yarns ◽  
Spacer Fabrics

Purpose – The purpose of this paper is to investigate effect of material properties in 3D knitted fabrics on thermo-physiological comfort. Design/methodology/approach – In the present study six different spacer fabrics were developed. Among these six fabrics, it was classified into two groups for convenient analysis of results, the first group has been developed using polyester/polypropylene blend with three different proportion and second group with polyester/polypropylene/lycra blend having another three different composition. As a spacer yarn, three different types of 88 dtex polyester monofilament yarn and polyester multifilament yarns (167 dtex and 14.5 tex) were used and 14.5 tex polypropylene and 44 dtex lycra multifilament yarns were also used for the face and back side of the spacer fabrics (Table I). These fabrics were developed in Syntax Pvt Ltd Czech Republic. Findings – The main influence on the water vapour permeability of warp knitted spacer fabrics is the kind of raw material, i.e. fibre wetting and wicking. Also there is no correlation between air permeability and water vapour permeability. It is found that both air permeability and thermal conductivity are closely related to the fabric density. It is also found that the fabric characteristics of spacer fabric show a very significant effect on the air permeability, thermal conductivity and mechanical properties of spacer fabric. Therefore, selection of spacer fabric for winter clothing according to its fabric characteristics. Practical implications – The main objective of the present study is to produce spacer knitted 3D fabrics suitable for defined climatic conditions to be used as clothing or in sports goods. Originality/value – New 3D knitted spacer fabrics can be produced with improved comfort properties.

scholarly journals Thermal comfort properties of cotton/spandex single jersey knitted fabric

2021 ◽  
Vol 72 (03) ◽  
pp. 244-249
Author(s):  
AMANY HALIL ◽  
PAVLA TĚŠINOVÁ ◽  
ABDELHAMID R.R. ABOALASAAD
Keyword(s):  
Thermal Comfort ◽  
Water Vapour ◽  
Woven Fabrics ◽  
Water Vapour Permeability ◽  
Knitted Fabric ◽  
Knitted Fabrics ◽  
Vapour Permeability ◽  
Thermal Comfort Properties ◽  
Cotton Knitted Fabric ◽  
Single Jersey

Knitted fabrics are characterized by comfort compared to woven fabrics due to their high extensibility and airpermeability, but they have lower dimensional stability after repeated washing especially single jersey knitted fabric(SJKF). Therefore, the spandex (Lycra) core-spun yarns are used to maintain the dimensions of knitted fabrics duringuse and after repeated stresses. In this study, nine elastic SJKF samples were produced at three levels of loop lengthand spandex percent using yarn linear density 30/1 Ne. For comparison, three 100% cotton knitted samples wereproduced with the same levels of loop length and yarn count. The dimensional and thermal comfort properties of thelong-stretch samples were compared with the short-stretch cotton knitted fabric. The thermal comfort properties (thermalconductivity, resistance, absorptivity, and water vapour permeability), air permeability, and dimensional properties weremeasured and compared to 100% cotton samples. The results showed that the stitch density, fabric density, fabricthickness, and thermal resistance increased, whereas the air, water vapour permeability, and spirality angle decreasedin cotton/spandex samples.

Thermal Comfort Properties of Knitted Fabrics Suitable for Skin Layer of Protective Clothing Worn in Extreme Hot Conditions

2011 ◽  
Vol 331 ◽  
pp. 184-189 ◽  
Author(s):  
Nazia Nawaz ◽  
Olga Troynikov ◽  
Chris Watson
Keyword(s):  
Body Temperature ◽  
Thermal Comfort ◽  
Water Vapour ◽  
Protective Clothing ◽  
Skin Layer ◽  
Water Vapour Permeability ◽  
The Body ◽  
Physical Parameters ◽  
Knitted Fabrics ◽  
Vapour Permeability

Key words: Physiological comfort, knitted fabrics, protective clothing Abstract. Thermal comfort of clothing is associated with the thermal balance between human body and the environment, and also a balance between the body heat production and the heat loss. During work activities performed in extreme hot conditions, the body produces substantial amount of heat energy which leads to raised body temperature. As a result the body perspires in liquid and vapour form to reduce the increased temperature. When this perspiration is transmitted to the atmosphere, the body temperature reduces. Thus the garments worn next to skin should allow the perspiration and heat to easily pass through them; otherwise the result will be a significant discomfort of the persons working in extreme hot conditions. Therefore, thermal properties and water vapour permeability of the fabrics used for the next-to-skin layer of protective clothing are very important for the maintenance of physiological comfort of workers. In the present study physical parameters, air permeability, porosity, thermal and water vapour permeability of six commercially available knitted fabrics of different fibre blends, different and knitted structures suitable for skin layer garments of protective clothing worn in extreme hot conditions were evaluated. The influences of fabric physical parameters, and optical porosity on thermal conductivity and water vapour permeability of fabrics were determined and correlation coefficients were calculated between these variables.

Using Control Chart to Detect Abnormal Changes in the Permeability

2013 ◽  
Vol 779-780 ◽  
pp. 319-322
Author(s):  
Ming Hung Shu ◽  
Jui Chan Huang ◽  
Thanh Lam Nguyen ◽  
Bi Min Hsu
Keyword(s):  
Water Vapour ◽  
Average Run Length ◽  
Stable Process ◽  
Critical Factor ◽  
Water Vapour Permeability ◽  
Control Signal ◽  
Process Mean ◽  
Vapour Permeability ◽  
Practical Applications ◽  
Printing Papers

Water-vapour permeability is a critical factor of writing/ printing papers in most of practical applications; but how to monitor the manufacturing process to keep the key characteristic of the paper in control is still understudied. Therefore, in this paper, in order to monitor the water-vapour permeability of writing/ printing papers, MaxGWMA chart is first suggested due to its best effectiveness in terms of average run length performance and its high capability of detecting small shifts in the process mean and variability as well as identifying the source and the direction of an out-of-control signal. By using MaxGWMA chart, assignable causes of any out-of-control signal should be deeply examined so as to have proper corrective actions undertaken to either eliminate them from the process or reduce the variability induced by them to make the papers consistently manufactured under a stable process.

Sign in / Sign up

Export Citation Format

Share Document