scholarly journals Experimental and numerical research of the influence of thrust vector control on the missile aerodynamics by cold and hot jet simulations

2020 ◽  
Vol 48 (4) ◽  
pp. 770-778
Author(s):  
Goran Ocokoljić ◽  
Boško Rašuo ◽  
Dijana Damljanović ◽  
Saša Živković

The flow field phenomena that occur as a result of thrust vector control (TVC) system activity on a missile with lateral jets are very complex and influence all other components of the missile. Influence is more significant when TVC is generating commands, when jets are asymmetrically directed. The main goal of these study was to determine the influence of of the hot rocket motor's combustion products on the basis of the CFD model proven with the cold-jet simulation. Based on obtained experimental aerodynamic coefficients for the cold-jet simulation the preliminary aerodynamic CFD model was designed. Three-dimensional Reynolds averaged Navier-Stokes numerical aerodynamic and hot-jet simulations were carried out to predict the aerodynamic loads of the missile based on the finite volume method. The study resulted in the definition of a methodology for the investigation of the jet reaction effects in a wind tunnel. A method for determining of the TVC system interference on the aerodynamic characteristics, as a basic prerequisite for structural, stability and performance analysis, was proposed. Mutual verification and validation process was carried out through experiment and proper application of the commercial CFD software code for calculation aerodynamic effects of the hot gases lateral jets on the performance of a guided missile. Experimental and computational results of the pitching moment coefficients are presented and agreed well with.

2015 ◽  
Vol 65 (4) ◽  
pp. 261 ◽  
Author(s):  
M.S.R. Chandra Murthy ◽  
Debasis Chakraborty

<p>Computational fluid dynamics methodology was used in characterising jet vane based thrust vector control systems of tactical missiles. Three-dimensional Reynolds Averaged Navier-Stokes equations were solved along with two-equation turbulence model for different operating conditions. Nonlinear regression analysis was applied to the detailed CFD database to evolve a mathematical model for the thrust vector control system. The developed model was validated with series of ground based 6-Component static tests. The proven methodology is applied toa new configuration.</p><p><strong>Defence Science Journal, Vol. 65, No. 4, July 2015, pp. 261-264, DOI: http://dx.doi.org/10.14429/dsj.65.7960</strong></p>


2013 ◽  
Vol 319 ◽  
pp. 599-604
Author(s):  
Makhsuda Juraeva ◽  
Kyung Jin Ryu ◽  
Sang Hyun Jeong ◽  
Dong Joo Song

A computational model of existing Seoul subway tunnelwas analyzed in this research. The computational model was comprised of one natural ventilationshaft, two mechanical ventilationshafts, one mechanical airsupply, a twin-track tunnel, and a train. Understanding the flow pattern of the train-induced airflow in the tunnel was necessary to improve ventilation performance. The research objective wasto improve the air quality in the tunnel by investigating train-induced airflow in the twin-track subway tunnel numerically. The numerical analysis characterized the aerodynamic behavior and performance of the ventilation system by solving three-dimensional turbulent Reynolds-averaged Navier-Stokes equations. ANSYS CFX software was used for the computations. The ventilation and aerodynamic characteristics in the tunnel were investigated by analyzing the mass flowrateat the exits of the ventilation mechanicalshafts. As the train passed the mechanical ventilation shafts, the amount of discharged-air in the ventilationshafts decreased rapidly. The air at the exits of the ventilation shafts was gradually recovered with time, after the train passed the ventilation shafts. The developed mechanical air-supply for discharging dusty air and supplying clean airwas investigated.The computational results showed that the developed mechanical air-supplycould improve the air quality in the tunnel.


1968 ◽  
Vol 72 (686) ◽  
pp. 171-177 ◽  
Author(s):  
John H. Neilson ◽  
Alastair Gilchrist ◽  
Chee K. Lee

This work deals with theoretical aspects of thrust vector control in rocket nozzles by the injection of secondary gas into the supersonic region of the nozzle. The work is concerned mainly with two-dimensional flow, though some aspects of three-dimensional flow in axisymmetric nozzles are considered. The subject matter is divided into three parts. In Part I, the side force produced when a physical wedge is placed into the exit of a two-dimensional nozzle is considered. In Parts 2 and 3, the physical wedge is replaced by a wedge-shaped “dead water” region produced by the separation of the boundary layer upstream of a secondary injection port. The modifications which then have to be made to the theoretical relationships, given in Part 1, are enumerated. Theoretical relationships for side force, thrust augmentation and magnification parameter for two- and three-dimensional flow are given for secondary injection normal to the main nozzle axis. In addition, the advantages to be gained by secondary injection in an upstream direction are clearly illustrated. The theoretical results are compared with experimental work and a comparison is made with the theories of other workers.


Author(s):  
Jie Gao ◽  
Chunde Tao ◽  
Dongchen Huo ◽  
Guojie Wang

Marine, industrial, turboprop and turboshaft gas turbine engines use nonaxisymmetric exhaust volutes for flow diffusion and pressure recovery. These processes result in a three-dimensional complex turbulent flow in the exhaust volute. The flows in the axial turbine and nonaxisymmetric exhaust volute are closely coupled and inherently unsteady, and they have a great influence on the turbine and exhaust aerodynamic characteristics. Therefore, it is very necessary to carry out research on coupled axial turbine and nonaxisymmetric exhaust volute aerodynamics, so as to provide reference for the high-efficiency turbine-volute designs. This paper summarizes and analyzes the recent advances in the field of coupled axial turbine and nonaxisymmetric exhaust volute aerodynamics for turbomachinery. This review covers the following topics that are important for turbine and volute coupled designs: (1) flow and loss characteristics of nonaxisymmetric exhaust volutes, (2) flow interactions between axial turbine and nonaxisymmetric exhaust volute, (3) improvement of turbine and volute performance within spatial limitations and (4) research methods of coupled turbine and exhaust volute aerodynamics. The emphasis is placed on the turbine-volute interactions and performance improvement. We also present our own insights regarding the current research trends and the prospects for future developments.


Sign in / Sign up

Export Citation Format

Share Document