scholarly journals COMPOSITION, STRUCTURE AND TEXTURAL CHARACTERISTICS OF DOMESTIC ACID ACTIVATED BENTONITE

2014 ◽  
Vol 5 (1) ◽  
Author(s):  
Zоrаn Pеtrоvić ◽  
Pеrо Dugić ◽  
Vојislаv Аlеksić ◽  
Sаbinа Bеgić ◽  
Vlаdаn Мićić ◽  
...  
Keyword(s):  
Sulfuric Acid ◽  
Low Temperature ◽  
Layered Structure ◽  
Nitrogen Adsorption ◽  
X Ray Diffraction ◽  
Textural Characteristics ◽  
X Ray ◽  
Before And After ◽  
Activated Bentonite ◽  
Composition Structure

Bentonites are aluminosilicate minerals which, due to their porosity, layered structure and composition have a wide application. Structural and textural characteristics of bentonite may be improved by different modification procedures. The aim of this study was to investigate compositional, structural and textural characteristics of domestic bentonite in place Gerzovo, before and after the activation with sulfuric acid. These characteristics were investigated by analytical methods, X-ray diffraction (XRD) and the method of low-temperature nitrogen adsorption (BET). Characteristics of acid-activated bentonite were compared with the characteristics of commercial active clay. The obtained results showed that the activation of bentonite with sulfuric acid leads to a significant improvement in structural and textural characteristics. Using these results it can be assumed that this bentonite will have good adsorption characteristics and can serve as an alternative in comparison with imported commercial aluminosilicate-based adsorbents.

Preparation and Luminescence of Host-Guest (SBA-15)-(Arsenano-III) Nanocomposite Materials

2013 ◽  
Vol 785-786 ◽  
pp. 537-541
Author(s):  
Xiao Dong Li
Keyword(s):  
Low Temperature ◽  
Absorption Spectra ◽  
Molecular Sieves ◽  
Diffuse Reflectance ◽  
Nitrogen Adsorption ◽  
Nanocomposite Materials ◽  
X Ray Diffraction ◽  
X Ray ◽  
Prepared Composite ◽  
Adsorption Desorption

The nanosized channels of SBA-15 molecular sieves were used as template and arsenano-III (ASA-III) was trapped inside the SBA-15 molecular sieves by means of liquid grafting method. The prepared nanocomposite materials were characterized by the powder X-ray diffraction, low temperature nitrogen adsorption-desorption and solid diffuse reflectance absorption spectra. The powder X-ray diffraction indicated the structure of the (SBA-15)-(ASA-III) still remains two-dimensional hexagonal mesostructrure. The low temperature nitrogen adsorption-desorption research showed that the ASA-III was present on the inner surface and partially occupied the channels of the molecular sieve. The UV-Vis solid state diffuse reflectance absorption spectra of the prepared composite materials showed the steroconfinmment effect of the host SBA-15 channels on the guest ASA-III and the guest was in the channels of the SBA-15 host. Luminous spectra showed that the prepared (SBA-15)-(ASA-III) nanocomposite materials have the investigating optical properties.

Reactive Adsorption of Sulfur Compounds from FCC Gasoline on NiO/γ-Al2O3

2009 ◽  
Vol 79-82 ◽  
pp. 2219-2222 ◽  
Author(s):  
Hai Yan Yin ◽  
Chun Hu Li ◽  
Lin Xue Wang ◽  
Ying Min Yu
Keyword(s):  
Nitrogen Adsorption ◽  
Sulfur Compounds ◽  
X Ray Diffraction ◽  
X Ray ◽  
Fcc Gasoline ◽  
Reactive Adsorption ◽  
Before And After ◽  
Desulfurization Efficiency ◽  
Diffraction Patterns ◽  
Sulfur Adsorption

NiO/γ-Al2O3 adsorbent was prepared by wet impregnated method. XRD, SEM-EDS, nitrogen adsorption techniques were used to characterize the adsorbents and GC-FPD was utilized to analyze the composition of gasoline before and after reaction. X-ray diffraction patterns indicate that noncrystal NiO particles are supported on the surface of γ-Al2O3. The results show that NiO/γ-Al2O3 adsorbent could be used to remove sulfur compounds and is effective on removing benzothiophene (BT). The maximum desulfurization efficiency appears when NiO content reaches 16%, and the total sulfur adsorption capacity is 1.84mg/g, however for 16%Ni/γ-Al2O3 the value reaches 3.495mg/g.

Evaluation of Freezing Methods by Low Temperature X-Ray Diffraction

1977 ◽  
Vol 35 ◽  
pp. 330-333
Author(s):  
T. Gulik-Krzywicki ◽  
M.J. Costello
Keyword(s):  
Biological Materials ◽  
Molecular Organization ◽  
X Ray Diffraction ◽  
Glass Capillary ◽  
X Ray ◽  
Rate Dependent ◽  
Before And After ◽  
Freeze Etching ◽  
Diffraction Patterns ◽  
Set Up

Freeze-etching electron microscopy is currently one of the best methods for studying molecular organization of biological materials. Its application, however, is still limited by our imprecise knowledge about the perturbations of the original organization which may occur during quenching and fracturing of the samples and during the replication of fractured surfaces. Although it is well known that the preservation of the molecular organization of biological materials is critically dependent on the rate of freezing of the samples, little information is presently available concerning the nature and the extent of freezing-rate dependent perturbations of the original organizations. In order to obtain this information, we have developed a method based on the comparison of x-ray diffraction patterns of samples before and after freezing, prior to fracturing and replication.Our experimental set-up is shown in Fig. 1. The sample to be quenched is placed on its holder which is then mounted on a small metal holder (O) fixed on a glass capillary (p), whose position is controlled by a micromanipulator.

Micro X-Ray Diffraction Study of Polycrystalline MgB 2 Wire and Evaluation of Carbon Doping Effect Via Low-Temperature Sintering

2019 ◽  
Author(s):  
Minoru Maeda ◽  
Dipak Patel, Dr. ◽  
Hiroaki Kumakura, Dr. ◽  
Gen Nishijima, Dr. ◽  
Akiyoshi Matsumoto, Dr. ◽  
...  
Keyword(s):  
Low Temperature ◽  
Diffraction Study ◽  
Carbon Doping ◽  
Doping Effect ◽  
Low Temperature Sintering ◽  
X Ray Diffraction ◽  
X Ray

The Application of X-Ray Diffraction at Elevated Temperatures to Study the Mechanism of Formation of Sodium Tripolyphosphate

1961 ◽  
Vol 5 ◽  
pp. 276-284
Author(s):  
E. L. Moore ◽  
J. S. Metcalf
Keyword(s):  
High Temperature ◽  
Low Temperature ◽  
Amorphous Phase ◽  
Elevated Temperatures ◽  
Sodium Tripolyphosphate ◽  
X Ray Diffraction ◽  
Mechanism Of Formation ◽  
X Ray ◽  
Temperature Form ◽  
High Temperature Form

AbstractHigh-temperature X-ray diffraction techniques were employed to study the condensation reactions which occur when sodium orthophosphates are heated to 380°C. Crystalline Na4P2O7 and an amorphous phase were formed first from an equimolar mixture of Na2HPO4·NaH2PO4 and Na2HPO4 at temperatures above 150°C. Further heating resulted in the formation of Na5P3O10-I (high-temperature form) at the expense of the crystalline Na4P4O7 and amorphous phase. Crystalline Na5P3O10-II (low-temperature form) appears after Na5P3O10-I.Conditions which affect the yield of crystalline Na4P2O7 and amorphous phase as intermediates and their effect on the yield of Na5P3O10 are also presented.

A New Polyethylene Corrosion Protecting Coating with Ion Selectivity

2011 ◽  
Vol 314-316 ◽  
pp. 273-278
Author(s):  
Yu Hua Dong ◽  
Ke Ren ◽  
Qiong Zhou
Keyword(s):  
Ion Selectivity ◽  
Nano Particles ◽  
Ammonium Bromide ◽  
Linear Low Density Polyethylene ◽  
X Ray Diffraction ◽  
Sulfosalicylic Acid ◽  
X Ray ◽  
Chemically Modified ◽  
Before And After ◽  
Industrial Standards

Linear low density polyethylene (LLDPE) was chemically modified with grafting maleic anhydride (MAH) monomer on its backbone by melting blending. Nano-particles SiO2 was modified by cationic surfactant hexadecyl trimethyl ammonium bromide (CTAB) and anionic surfactant sulfosalicylic acid (SSA) and added to PE coating respectively. Measurement of membrane potential showed that the coating containing modified SiO2 nano-particles had characteristic of ion selectivity. The properties of the different coatings were investigated according to relative industrial standards. Experimental results indicated that PE coating with ion selectivity had better performances, such as adhesion strength, cathodic disbonding and anti-corrosion, than those of coating without ion selectivity. Crystal structure of the coatings before and after alkali corrosion was characterized by Fourier transform infrared spectra (FTIR) and X-ray diffraction (XRD). Structure of the coating without ion selectivity was damaged by NaOH alkali solution, causing mechanical properties being decreased. And the structure of the ion selective coatings was not affected.

scholarly journals X-ray diffraction analysis of kaolin M1 and M2 via the Williamson–Hall and Warren–Averbach methods

2021 ◽  
pp. 174751982098472
Author(s):  
Lalmi Khier ◽  
Lakel Abdelghani ◽  
Belahssen Okba ◽  
Djamel Maouche ◽  
Lakel Said
Keyword(s):  
Grain Size ◽  
High Temperature ◽  
Low Temperature ◽  
Diffraction Analysis ◽  
Mechanical Resistance ◽  
X Ray Diffraction ◽  
Integral Breadth ◽  
X Ray ◽  
Mullite Phase

Kaolin M1 and M2 studied by X-ray diffraction focus on the mullite phase, which is the main phase present in both products. The Williamson–Hall and Warren–Averbach methods for determining the crystallite size and microstrains of integral breadth β are calculated by the FullProf program. The integral breadth ( β) is a mixture resulting from the microstrains and size effect, so this should be taken into account during the calculation. The Williamson–Hall chart determines whether the sample is affected by grain size or microstrain. It appears very clearly that the principal phase of the various sintered kaolins, mullite, is free from internal microstrains. It is the case of the mixtures fritted at low temperature (1200 °C) during 1 h and also the case of the mixtures of the type chamotte cooks with 1350 °C during very long times (several weeks). This result is very significant as it gives an element of explanation to a very significant quality of mullite: its mechanical resistance during uses at high temperature remains.

Silicate-germanate K2Y[(Si3Ge)O10(OH)] with unusual complex corrugated layer and its correlation to ring silicate gerenite and chain silicate chkalovite

2020 ◽  
Vol 235 (4-5) ◽  
pp. 167-172
Author(s):  
Anastasiia P. Topnikova ◽  
Elena L. Belokoneva ◽  
Olga V. Dimitrova ◽  
Anatoly S. Volkov ◽  
Leokadiya V. Zorina
Keyword(s):  
Low Temperature ◽  
Cross Section ◽  
Complex Anion ◽  
Diffraction Experiment ◽  
X Ray Diffraction ◽  
Unit Cell Parameters ◽  
X Ray ◽  
Cell Parameters ◽  
Chain Silicate ◽  
Novel Complex

AbstractA new silicate-germanate K2Y[(Si3Ge)O10(OH)] was synthesized hydrothermally in a system Y2O3:GeO2:SiO2 = 1:1:2 (T = 280 °C; P = 90–100 atm.); K2CO3 was added to the solution as a mineralizer. Single-crystal X-ray diffraction experiment was carried out at low temperature (150 K). The unit cell parameters are a = 10.4975(4), b = 6.9567(2), c = 15.4001(6) Å, β = 104.894(4)°; V = 1086.86(7) Å3; space group is P 21/c. A novel complex anion is presented by corrugated (Si,Ge) tetrahedral layers connected by couples of YO6 octahedra into the mixed microporous framework with the channels along b and a axes, the maximal size of cross-section is ~5.6 Å. This structure has similarity with the two minerals: ring silicate gerenite (Ca,Na)2(Y,REE)3Si6O18 · 2H2O and chain silicate chkalovite Na2BeSi2O6. Six-member rings with 1̅ symmetry as in gerenite are distinguished in the new layer. They are mutually perpendicular to each other and connected by additional tetrahedra. Straight crossing chains in chkalovite change to zigzag four-link chains in the new silicate-germanate layer.

Sign in / Sign up

Export Citation Format

Share Document