scholarly journals Where Truck Drivers Stop – Application of Vehicle Tracking Data for the Identification of Rest Locations and Driving Patterns

2021 ◽  
Vol 33 (6) ◽  
pp. 821-832
Author(s):  
Bálint Csendes ◽  
Gábor Albert ◽  
Norina Szander ◽  
András Munkácsy

Road transport plays an essential role in freight transport throughout Europe, therefore, conditions that may hinder seamless operations in this sector require thorough consideration for evidence-based action. Critical amongst these key conditions is how, when, and where truck drivers stop, as a common set of rules strictly regulates their driving times and rest periods, which causes mandatory interruptions in the supply chains. However, approximating reliable estimations of freight traffic flows and road infrastructure usage constitutes a considerable challenge for researchers. This paper presents a robust data processing approach to designate rest area stops and to calculate the pertaining driving and rest times. Drawing on the abundance of navigation information provided by private fleet toll registration services, a comprehensive spatial-temporal truck stop database on all major rest areas along the toll road network in Hungary has been compiled. Based on the assessment and comparison of driving and rest times, driving and parking times have been analysed, including micro-scale analysis of particular rest areas. Both the methods applied and the results achieved can be of strategic interest to better understand truck driving patterns, as well as to develop targeted and cost-effective measures to streamline freight transport operations in other contexts.

Author(s):  
Adrian Sandt ◽  
Haitham Al-Deek ◽  
Md Imrul Kayes

It can be expensive for agencies to deploy wrong-way driving (WWD) countermeasure technologies on limited access facilities. This paper discusses a WWD crash risk (WWCR) reduction approach to help agencies determine the most cost-effective deployment locations. First, a directional WWCR model identifies roadway segments with high WWCR (WWD hotspots), then two optimization algorithms identify individual exits and mainline sections with high WWCR for priority deployment of WWD countermeasure technologies. This new approach was applied to the Central Florida Expressway Authority (CFX) toll road network to determine priority deployment locations for “Wrong Way” signs with Rectangular Flashing Beacons (RFBs). After modeling each direction of the CFX roadways separately, fifteen WWD hotspot segments were identified. WWCR reduction values were calculated for each exit by determining how far wrong-way vehicles travel based on WWD 911 call data. The exit ramp optimization algorithm was then tested for four investment levels using actual RFB deployment costs and real-world constraints. These optimization results could help CFX better utilize its investment by between 9% and 28% compared with only deploying RFBs at exits in the WWD hotspot segments. The mainline optimization algorithm, which considered the WWCR reduction caused by RFBs already deployed at CFX exit ramps, showed that State Road (SR) 408, SR 417, and SR 528 have mainline sections with high WWCR. These results show how the WWCR reduction approach can help agencies identify WWD hotspot segments and high-WWCR exits not in these segments (lone wolf exits), better utilize their investment, and determine mainline sections with high WWCR.


Author(s):  
Sebastjan Škerlič ◽  
Vanja Erčulj

The goal of the research is to determine how compensation affects the safety behavior of truck drivers and consequently the frequency of traffic accidents. For this purpose, a survey was conducted on a sample of 220 truck drivers in international road transport in the EU, where the results of the Structural Equation Model (SEM) show that in the current state of the transport sector, financial and non-financial incentives have a positive impact on the work and safety behavior of drivers. Financial incentives also have an impact on drivers’ increased perception of their driving ability, while moving violations continue to have a major impact on the number of accidents. The proposed improvements enable decision-makers at the highest level to adopt legal solutions to help manage the issues that have been affecting the industry from a work, social and safety point of view for the past several years. The results of the research therefore represent an important guideline for improvements to the legislature as well as in the systematization of truck driver compensation within companies.


1984 ◽  
Vol 13 (1) ◽  
pp. 60-64
Author(s):  
Edward Karpoff ◽  
Fred C. Webster

Costs involved in double-bottoms (tandem trailers) and TOFC (trailer-on-flatcar; piggyback) were modeled and compared with conventional over-the-road transport of bulk milk from northern Vermont in single trailers. Both modes were found to be both cost-effective and fuel-sparing alternatives to conventional transport.Since the study's completion, although not as a direct result of it, two shippers have adopted these innovations. One of them (using double-bottoms) has budgeted savings even larger than those claimed in our study.


Author(s):  
R. S. Durov ◽  
◽  
E. V. Varnakova ◽  
K. O. Kobzev ◽  
◽  
...  

Introduction. One of the most pressing socio-economic problems is the state of the environment, which affects the living conditions of many people. The article deals with the problem areas of the intersection of 20-ya Liniya street – Sholokhov Avenue in Rostov-on-Don. Problem Statement. The purpose of this paper is to improve environmental safety at the intersection of 20-ya Liniya street – Sholokhov Avenue in Rostov-on-Don by reducing emissions from road transport through the proposed measures to reorganize traffic on this section of the road network. Theoretical Part. The article provides an assessment of environmental and road safety on the road network section before applying the proposed measures. The measures are listed and justified that would help improve the conditions for road transport at the selected intersection and reduce emissions from road transport, which would improve environmental safety. The calculation of environmental indicators was made after the proposed measures to reduce NOx emissions by cars. Conclusion. The article analyzes the environmental indicators before and after the events, and then compares them. Based on the analysis and calculations, it is determined how much the proposed measures to optimize traffic will help reduce NOx emissions by cars.


2021 ◽  
Vol 19 (2) ◽  
pp. 70-78
Author(s):  
M. Poliak ◽  
N. Yu. Lakhmetkina

In 1956 there was a significant step in international road freight transport – conclusion of Convention on the contract of carriage in international road freight transport (CMR Convention), the basic purpose of which was to unify the rules in the international transport of goods and thus promote the development of international trade. From a practical point of view, this was very important for both carriers and transporters. The Convention describes the most important document in the carriage of goods – the CMR consignment note.Recently, the term «neutralization» has been used in connection with the CMR consignment note, which is considered as an interference with the system of functioning of transport documents, which aims to obscure the actual movement of the consignment during transport. At the same time, neutralization of the consignment note is not so much contrary to legal norms as it can lead to undesirable consequences for carriers. For this reason, the question of whether it is possible to neutralize the CMR consignment note in accordance with the current rules and whether the neutralization of the CMR consignment note does not violate the functionality of the existing system is relevant. Therefore, the objective of this work is to study the reasons and methods for neutralizing CMR consignment notes, as well as options for handling neutralized consignment notes.Considering that neutralization of the consignment note has become a relatively common practice and means the exchange of original consignment notes or transport documents with other consignment notes or transport documents, canceling the actions of the first consignment note, in the article the authors, based on their own research, identified the possibilities of using the neutralization of the CMR consignment note in practice for certain types of goods, routes of the most frequent use, as well as the risks of these procedures in road transport. 


Author(s):  
Elżbieta MACIOSZEK

Transport plays an important role in the economy of any country. Efficient and developed transport infrastructure of various modes of transport significantly affects the availability of transport services, and consequently, the well-being of citizens. This article presents an analysis of the volume of passengers and cargo transport using rail and road transport in Poland in 2009-2019. These analyses were carried out based on data obtained from the Central Statistical Office. All data concerns Polish entities that provide services in the field of passenger and freight transport in Poland and focuses on such information as the volume of passengers and cargo by individual means of transport, broken down into domestic and international transport. Further, the presented analyses concern the length of the available rail and road routes, tracks, the size of the rolling stock as well as the groups of transported loads.


1992 ◽  
Vol 36 (13) ◽  
pp. 975-979
Author(s):  
Anne-Marie Feyer ◽  
Ann M. Williamson

A Questionnaire was used to obtain information from 960 long distance truck drivers about the drivers” experience, type of employment and their working conditions, type of driving operation, as well as details of their last trip and their last working week. Operations specifically designed to combat driver fatigue by provision of a relief driver in a team operation did not appear to achieve their intended outcome. The potential benefits of such operations appeared to be outweighed by the greater distances and lack of flexibility that characterised these trips.


2020 ◽  
Vol 10 (1) ◽  
pp. 13-26 ◽  
Author(s):  
Panagiotis Kotsios ◽  
Dimitrios Folinas

Road transport is one of the most popular and practical means of freight transport in the world today. However, the cost of road freight transport may differ from one country to the next due to variances in a number of cost factors, including fuels, wages, taxation, tolls, insurance, maintenance, tyres, repairs, parking spaces, etc. The goal of this research was to measure and compare the cost of road freight transport in the 20 European countries with the highest recorded volume of tonne-kilometres, in order to draw conclusions about the cost competitiveness of road freight transport among them. Cost competitiveness in the sample was measured by 4 main cost categories: fuels, drivers' wages, tyres, and tolls. The results show large cost variations between countries. The countries found to have the lowest road freight transport cost were Lithuania, Poland and Bulgaria, and those with the highest costs were Norway, Austria, and the UK. The largest differences in costs were met in tolls and other road taxes, followed by drivers' wages, fuels, and finally tyres.


2003 ◽  
Vol 1819 (1) ◽  
pp. 314-322
Author(s):  
Bruce S. Morton ◽  
Alex T. Visser ◽  
Emile Horak

Low-volume and unpaved roads constitute the majority of the road network throughout the developing and developed world. Upgrading these unpaved roads to conform to standards of low-volume flexible asphalt pavements is a costly exercise. In most instances, this involves constructing an entirely new pavement base. Recent technological advances in the field of deep in situ recycling have provided pavement engineers with an alternative to standard rehabilitation and reconstruction methods of flexible pavements. One such technique of stabilization is foamed tar treatment of inferior natural pavement materials through the application of deep in situ recycling to produce a stabilized base for lowvolume flexible pavements. Foamed tar technology and the concept of deep in situ recycling, and its advantages over current reconstruction methods, were reviewed. Health aspects relating to implementation of the stabilization process were addressed with respect to the use of gasifier tar in a controlled recycling environment. The engineering properties of foamed tar mixes were compared with existing stabilization techniques. A test section was constructed with particular attention to the flexibility of foamed tar for placement time, workability, and durability to environmental conditions. Performance testing results were analyzed. In conclusion, the benefits of foamed tar stabilization for developing an improved road network in a cost-effective manner were evaluated.


Sign in / Sign up

Export Citation Format

Share Document