Abstract
Solid polymer electrolytes (SPEs) based on nanocomposites are attracting increasing attention due to their technological and industrial applications. In the present work, a facile aqueous casting method was utilized for the preparation of a starch-chitosan blend loaded with nanosized NaTiO3 (NTO) and co-mixed with ErCl3 (EC) salt. The interactions between OH group of starch and N–H group of chitosan with NTO and EC, and the films' crystallinity and surface morphology were studied by FTIR, XRD, and SEM. UV-Vis-NIR measurements showed the indirect (direct) optical band gaps decreased from 3.4 to 2.0 eV (4.5 to ~ 2.5 eV), i.e., ~ 41–44 % shrinking. At the time that the films maintained a reasonable transmittance. The optical constants of the films; extinction coefficient, refractive index, and the carrier’s concentration to the electron effective mass (N/m*) are reported. N/m* of the pure blend was 4.85 x 1039 (kg-1 m-3) increased to 1.64 times and 2.8 times after loading with 1.0% NTO and 20% EC, respectively. Various dielectric parameters (dielectric constant ε', dielectric loss ε'', ac conductivity σac, and dielectric moduli M' & M'') were evaluated in the frequency range 5 Hz - 1 MHz and temperatures of 298 - 353 K. The conductivity (σac) of the blend increased from 1.10×10-3 S/cm to 8.17×10-3 S/cm after modifying with 20% EC, i.e., became 8 times greater. Moreover, the influence of NTO and EC on the conduction mechanism and Cole-Cole plots are discussed. The improvements in the optical and electrical properties of EC/NTO/blend illustrate the possibility of extending the applications of these smart materials to include optoelectronic devices, batteries, and supercapacitors.
Dielectric and electrical properties of annealed ZnS thin films. The appearance of the OLPT conduction mechanism in chalcogenides