Production of Low-cost Diode Laser module and Fabrication of Electronic Device using the Laser

Author(s):  
Hu Seung Lee ◽  
Jae Min Kim ◽  
Bong Chul Kang ◽  
Joo Hyung Lee ◽  
Jun Hee Na
Author(s):  
Ashraf. EL-Sherif ◽  
Mahmoud Hassan ◽  
Ayman Mokhtar ◽  
Ahmed Samy

2013 ◽  
Vol 64 (1) ◽  
Author(s):  
Rashiqah Rashli ◽  
Elmi Abu Bakar ◽  
Shahrul Kamaruddin

Ultrasonic welding had been widely used in various manufacturing industries such as aviation, medical, electronic device and many more. It offers a continued safe operation, faster and also low cost as it able to join weld part less than one second and also simple to maintain the tooling devices. Though ultrasonic welding brings a lot of advantages in assembly especially in thermoplastic material of manufacturing product, it also has a dominant problem to be deal with. The problem in ultrasonic welding is poor weld quality due to improper selection of ultrasonic welding parameters especially in near field configuration. Thus, an optimal combination of parameters is crucial in order to produce good quality weld assembly for this configuration. In this paper, ultrasonic welding process, ultrasonic weld joint defects and determination of optimal parameters for thermoplastic material had been discussed thoroughly. 


2021 ◽  
Author(s):  
Evangelos Skoubris ◽  
George Hloupis

<p>Among all natural disasters, river floods are becoming increasingly frequent. They present high risk and their impact can be fairly destructive and of strong economic, health, and social importance. Key tools to avoid their catastrophic results are the Early Warning Systems (EWS). An EWS usually monitors various physical quantities through a specific hardware, and produce data which after certain processing can detect and estimate the level of the risk.</p><p>In the current work we present the concept, the design, the application, and some preliminary data regarding a low cost imaging node, part of an EWS aimed for river floods. This EWS consists of various sensing nodes which are mainly equipped with water presence detectors, water level meters, water temperature sensors, along with the necessary networking capability. The novelty of this new node design is that it utilizes a VGA resolution camera which captures still images of a view of interest. The latter can be for example an implementation prone to defects in case of flood, such as a river basin level road crossing, or a bridge. The images can also provide constant monitoring of the river basin state, i.e. to detect the presence of any unwanted objects (waste or other natural & artificial bring materials). Through image processing the images can even provide some coarse data, i.e. water level measurements by utilizing vertical stripped rods within the field of view of the camera.</p><p>The ability to have a camera usually counteracts the IoT characteristics of an electronic device. Nevertheless, in this design the IoT character of the node was not constrained. The nodes have extended power autonomy (several months via Li-Ion battery, optionally solar rechargeable), present a small size, each node is network independent using GSM and LoRaWAN technology. The data usage is minimized by uploading only 2 QVGA images per day in normal operation (can be increased to a maximum of 48 VGA images per day, if required). In case of risk detection the node also supports the actuation of a local warning sign.</p>


Author(s):  
Akshaya Nidhi Bhati ◽  
Himanshu Maharshi ◽  
Arun Kumar
Keyword(s):  

Applied laser ◽  
2013 ◽  
Vol 33 (5) ◽  
pp. 542-546
Author(s):  
陈艳荣 Chen Yanrong ◽  
郭林辉 Guo Linhui ◽  
高松信 Gao Songxin ◽  
朱占达 Zhu Zhanda ◽  
姜梦华 Jiang Menghua ◽  
...  

Electronics ◽  
2019 ◽  
Vol 8 (11) ◽  
pp. 1288 ◽  
Author(s):  
George Baldoumas ◽  
Dimitrios Peschos ◽  
Giorgos Tatsis ◽  
Spyridon K. Chronopoulos ◽  
Vasilis Christofilakis ◽  
...  

In this paper, a prototype photoplethysmography (PPG) electronic device is presented for the distinction of individuals with congestive heart failure (CHF) from the healthy (H) by applying the concept of Natural Time Analysis (NTA). Data were collected simultaneously with a conventional three-electrode electrocardiography (ECG) system and our prototype PPG electronic device from H and CHF volunteers at the 2nd Department of Cardiology, Medical School of Ioannina, Greece. Statistical analysis of the results show a clear separation of CHF from H subjects by means of NTA for both the conventional ECG system and our PPG prototype system, with a clearly better distinction for the second one which additionally inherits the advantages of a low-cost portable device.


2015 ◽  
Author(s):  
Paul Kumar Upputuri ◽  
Kathyayini Sivasubramanian ◽  
Manojit Pramanik

Micromachines ◽  
2017 ◽  
Vol 8 (10) ◽  
pp. 292
Author(s):  
Carlos Polanco ◽  
Ignacio Vazquez ◽  
Adrian Martinez-Rivas ◽  
Miguel Arias-Estrada ◽  
Thomas Buhse ◽  
...  

2011 ◽  
Author(s):  
Eryn C. Cook ◽  
Paul J. Martin ◽  
Daniel A. Steck
Keyword(s):  
Low Cost ◽  

2017 ◽  
Vol 13 (6) ◽  
pp. 423-426 ◽  
Author(s):  
Yi-ming Zhang ◽  
Yu Liu ◽  
Zhi-ke Zhang ◽  
Ze-ping Zhao ◽  
Ye Tian ◽  
...  
Keyword(s):  
Low Cost ◽  

Sign in / Sign up

Export Citation Format

Share Document