Adsorption of Low-Concentration Formaldehyde from Air by Silver and Copper Nano-Particles Attached on Bamboo-Based Activated Carbon

2013 ◽  
pp. 332-336 ◽  
Author(s):  
W. D. P. Rengga ◽  
M. Sudibandriyo ◽  
M. Nasikin
Keyword(s):  
Activated Carbon ◽  
Nano Particles ◽  
Low Concentration ◽  
Low Concentration Formaldehyde

Photo-catalytic Study of Malachite Green Dye Degradation Using Rice Straw Extracted Activated Carbon Supported ZnO Nano-particles

2020 ◽  
Vol 10 (6) ◽  
pp. 849-859
Author(s):  
Radwa A. El-Salamony ◽  
Abeer A. Emam ◽  
Nagwa A. Badawy ◽  
Sara F. El-Morsi
Keyword(s):  
Activated Carbon ◽  
Visible Light ◽  
Rice Straw ◽  
Malachite Green ◽  
Dye Degradation ◽  
Nano Particles ◽  
Oh Radicals ◽  
Impregnation Method ◽  
Photo Degradation ◽  
Malachite Green Dye

Objective: ZnO nanoparticles were synthesized using wet impregnation method, and activated carbon from rice straw (RS) prepared through chemical route. Methods: The nano-composites ZnO-AC series were prepared with different ZnO:AC ratio of 10, 20, 50, and 70% to optimize the zinc oxide nanoparticles used. The obtained composites were characterized by FE-SEM, XRD, SBET, and optical techniques then used for the photo-degradation of Malachite green dye (MG) under visible light. Results: It was found that 10ZnO-AC exhibited excellent visible light photo-catalytic performance. The ·OH radicals’ formation is matching with photo-activity of the prepared composites. The photo-degradation efficiency of MG increased from 63% to 93%, when the 10ZnO-AC photocatalyst amount was increased from 0.5 to 6 g/L. Conclusion: The GC-MS technique was used to analyze the intermediates formed; up to 15 kinds of chemicals were identified as the degradation products.

The Adsorption of Low Concentration SO2 with the Second Modified Activated Carbon Fiber Loaded Mn

2011 ◽  
Vol 109 ◽  
pp. 125-130
Author(s):  
Jie Fu ◽  
Ying Chun Yan ◽  
Jing Zhang
Keyword(s):  
Activated Carbon ◽  
High Temperature ◽  
Adsorption Properties ◽  
Activated Carbon Fiber ◽  
Impregnation Method ◽  
Air Velocity ◽  
Desulfurization Rate ◽  
Modified Activated Carbon ◽  
Low Concentration ◽  
Adsorption Temperature

The Mn loaded ACF (ACF-Mn), prepared by impregnation method combined with activation method under high temperature, can be used to adsorb the low concentration SO2. The modified ACF was characterized by iodine value and functional groups. The adsorption properties of low concentration SO2 on ACF-Mn-Cu50 were also studied. The result showed that the adsorption properties were improved with the granular Cu. Amount of Mn particles attached to the surface of ACF and the desulfurization rate of ACF-Mn-Cu50 both increased after second modification when the adsorption temperature was 60°C, the air velocity was Q1=0.3 L/min and Q2=0.4 L/min respectively and the concentration of SO2 was 0.62×10-4 μg/ml.

The removal of low concentration formaldehyde over sewage sludge char treated using various methods

2011 ◽  
Vol 28 (7) ◽  
pp. 1556-1560 ◽  
Author(s):  
Ji Young Lee ◽  
Sung Hoon Park ◽  
Jong-Ki Jeon ◽  
Kyung-Seun Yoo ◽  
Seung-Soo Kim ◽  
...  
Keyword(s):  
Sewage Sludge ◽  
Low Concentration ◽  
Sewage Sludge Char ◽  
Low Concentration Formaldehyde
Sign in / Sign up

Export Citation Format

Share Document