scholarly journals Effects of Fruit Thinning and Main Stem Pruning in Melon Crops

2019 ◽  
pp. 1-10
Author(s):  
Gleyce Lacerda da Silva ◽  
Roberto Cleiton Fernandes Queiroga ◽  
Francisco Hevilásio Freire Pereira ◽  
Francimalba Francilda de Sousa ◽  
Zaqueu Lopes da Silva ◽  
...  
Keyword(s):  
Leaf Area ◽  
Block Design ◽  
Soluble Sugars ◽  
Main Stem ◽  
Soluble Solids ◽  
Fruit Thinning ◽  
Randomized Block Design ◽  
Total Productivity ◽  
Set Up

Objective: This study aimed to assess the productivity and quality of a melon crop treated with fruit thinning and main stem pruning under field conditions. Experimental Design: The treatments comprised the amount of fruit thinning in the plant (one, two and without thinning) and the period of main stem pruning (35, 40, 45 and 50 days after transplanting - DAT). The crop was set up in a randomized block design factorial of type 3x4, with five replications. Location and Duration of the Study: The experiment carried out at the Center for Agrifood Science and Technology (CCTA) of the Federal University of Campina Grande (UFCG), Campus Pombal - PB, Brazil, from December 2016 to February 2017. Methodology: The Hopey King hybrid of the Cantaloupe group was cultivated at a spacing of 2.0 x 0.4 m. Results: The plants without thinning of fruits provided lower values ​​of leaf area and fruits of lower mass. However, due to their higher quantity per hectare, the crop total productivity was high. On the other hand, plants with fewer fruits had the highest values ​​of soluble solids, total and non-reducing soluble sugars. The leaf area, fruit mass, total productivity, and the concentration of reducing and non-reducing soluble sugars were higher when the plants were pruned at 35 DAT. Conclusion: The fruit thinning and main stem pruning affected the production and quality of melon fruits significantly. For more demanding markets, we recommend to treat the plants with one or two fruits and prune at 35 days after transplantation, aiming to enhance the quality variables.

The Harvest Season Changes the Organoleptic Properties of Onion during Storage

2019 ◽  
pp. 1-9
Author(s):  
Ariana Pereira Mota ◽  
Renata Ranielly Pedroza Cruz ◽  
Ana Paula Sato Ferreira ◽  
Mateus De Paula Gomes ◽  
Maria Eduarda da Silva Guimarães ◽  
...  
Keyword(s):  
Phenolic Compounds ◽  
Reducing Sugars ◽  
Block Design ◽  
Soluble Sugars ◽  
Titratable Acidity ◽  
Soluble Solids ◽  
Organoleptic Properties ◽  
Post Harvest ◽  
Randomized Block Design

Aims: The objective was to determine the influence of the onion harvest time "Baia Periforme" on post-harvest quality of the bulbs during storage. Study Design: The experiment was conducted in a randomized block design with three treatments, six replicates with two bulbs each. Place and Duration of Study: Departamento de Fitotecnia, Universidade Federal de Viçosa, between June 2017 and July 2018. Methodology: Seedlings, 20 days old, were transplanted into 20 cm spacing between rows and 10 cm between plants. The bulbs were harvested 120 days after transplanting with manual tipping of the pseudo-stem (T1), with 50 (T2) or 75% (T3) of the bulbs popped. The soluble sugars (SS), non-reducing sugars (NRS), reducing sugars (RS), total soluble solids (TSS), titratable acidity of phenolic compounds and alinase activity was determined every 30 days for 90 days. Results: The content of SS, TSS, phenolic compounds and alinase activity increased in the onions of T2, resulting in more sweet and pungent bulbs due to the higher content of acidity and phenolic compounds. Conclusion: The post-harvest quality of onion bulbs "Baia Periforme" was maintained when they were harvested with 50% of bulbs popped.

scholarly journals Melon fruit yield and quality as a function of doses and times of biostimulant application

2020 ◽  
Vol 9 (7) ◽  
pp. e130973911
Author(s):  
Roberto Cleiton Fernandes de Queiroga ◽  
Zaqueu Lopes da Silva ◽  
Odair Honorato Oliveira de ◽  
Elidayane da Nóbrega Santos ◽  
Higínio Luan Oliveira Silva ◽  
...  
Keyword(s):  
Block Design ◽  
Fruit Production ◽  
Soluble Solids ◽  
Application Time ◽  
Time Of Application ◽  
Yield And Quality ◽  
Randomized Block Design ◽  
Semi Arid Region ◽  
Fruit Mass

The objective of this study was to evaluate the productivity and quality of melon fruits as a function of the dose and time of application of biostimulant in the conditions of the semi-arid region of Paraíba. The experiment was carried out at the Federal University of Campina Grande, campus of Pombal - PB, Brazil, in a randomized block design in a 4 x 5 split plot scheme, with doses of biostimulant (0; 0.5; 1.0; 1, 5 and 2.0 L ha-1) and in the subset of the biostimulant application times (15; 20; 25 and 30 days before harvest - DAC), in four replications. Characteristics related to fruit production and quality were evaluated. There was no interaction between the factors of dose and application time of the biostimulant in any of the evaluated characteristics. Thus, the highest estimated values of number of fruits per plant, fruit mass and total melon production were obtained with the application of doses ranging from 0.9 to 1.5 L ha-1 and at the time of application it varied from 22,5 to 23.6 DAC. The content of soluble solids increased 5.5% when the biostimulant dose of 2.0 L ha-1 was used and 4.4% when the product was applied 15 days before harvest.

scholarly journals Production and quality of okra produced with mineral and organic fertilization

2019 ◽  
Vol 23 (2) ◽  
pp. 97-102
Author(s):  
Hemmannuella C. Santos ◽  
Emmanuel M. Pereira ◽  
Rafael L. S. de Medeiros ◽  
Paulo M. de A. Costa ◽  
Walter E. Pereira
Keyword(s):  
Vitamin C ◽  
Block Design ◽  
Titratable Acidity ◽  
Soluble Solids ◽  
Organic Fertilization ◽  
Randomized Block Design ◽  
Number Of Leaves ◽  
The Mean ◽  
Organic Compost

ABSTRACT Okra, Abelmoschus esculentus (L.) Moench, is a vegetable with annual fruit native to hot regions of Africa, well adapted to the conditions of the Northeast and Southeast regions of Brazil, where it is widely used by small farmers. This study aimed to evaluate the effect of mineral and organic fertilization on the production and quality of okra fruits. The experiment was conducted in randomized block design, with three replicates and eleven treatments defined according to a Baconian matrix. Treatments consisted of doses of N (0, 100, 200 and 300 kg ha-1), P (0, 100, 200 and 300 kg ha-1) and K (0, 80, 160 and 240 kg ha-1), as well as absence and presence of organic compost (30 t ha-1). The following parameters were evaluated: plant height, stem diameter, number of leaves, production of fruits plant-1, number of fruits plant-1, fruit length and diameter and fruit quality (pH, soluble solids, titratable acidity, vitamin C and electrical conductivity). The crop is demanding in terms of K and N fertilizations, with increments of 15.8 and 36% in the mean number and diameter of fruits, respectively. Organic fertilization did not influence the vegetative growth of okra, but was beneficial to the production of fruits with higher vitamin C content, 52% higher than the contents found in fruits produced without such input.

scholarly journals Allometric relationship and leaf area modeling estimation on chia by non-destructive method

2021 ◽  
Vol 25 (5) ◽  
pp. 305-311
Author(s):  
Patrícia C. H. Goergen ◽  
Isabel Lago ◽  
Natalia T. Schwab ◽  
Alexandre F. Alves ◽  
Charles P. de O. Freitas ◽  
...  
Keyword(s):  
Leaf Area ◽  
Block Design ◽  
Main Stem ◽  
Allometric Relationship ◽  
Linear Quadratic ◽  
Predictive Capacity ◽  
Randomized Block Design ◽  
Number Of Leaves ◽  
Salvia Hispanica L ◽  
Non Destructive

ABSTRACT This study aimed to obtain equations to estimate leaf area from linear leaf dimensions and establish the allometric relationship between leaf area and the number of leaves on the main stem of chia (Salvia hispanica L.) at different sowing times. The experiment was conducted in the agricultural year 2016/2017 on five sowing times in Santa Maria, RS, Brazil, in a randomized block design with four repetitions. In each plot, ten random plants were marked weekly during the vegetative phase to determine the number of leaves (NL) in the main stem, and three of these for the determination of leaf area (LA). A total of 70 leaves of different sizes were used to calibrate the model. Another 106 leaves were used to test the predictive capacity of the equations by various statistical indices. The length (L) and the largest leaf width (W) were measured. Leaf collection was carried out during the cycle, in all sowing times to represent all leaf sizes. The linear, quadratic, exponential, and potential models were adjusted. The non-destructive method, through the linear dimensions of the leaf, is appropriate for estimating the leaf area in chia. The general equation LA = 0.642 (L x W) can be used to estimate the leaf area of the chia plants without loss of precision. The potential model is appropriate to characterize the allometric relationship between leaf area evolution and the number of leaves accumulated in the main stem of chia at different sowing times.

scholarly journals Productivity and quality of irrigated organic yellow passion fruits in deep planting in Southeastern Amazon

2020 ◽  
Vol 42 (4) ◽  
Author(s):  
Wagner de Moura Francisco ◽  
Sebastião Elviro de Araújo Neto ◽  
Thays Lemos Uchôa ◽  
Luís Gustavo de Souza e Souza ◽  
Nilciléia Mendes da Silva
Keyword(s):  
Block Design ◽  
Titratable Acidity ◽  
Soluble Solids ◽  
Organic System ◽  
Randomized Complete Block Design ◽  
Total Titratable Acidity ◽  
Total Productivity ◽  
Fruit Mass ◽  
Yellow Passion Fruit

Abstract The aim of this work was to evaluate the effect of irrigation and deep planting of tall yellow passion fruit seedlings in the organic system on fruit quality and productivity. A randomized complete block design with 2x4 subdivided plots, with 8 treatments and 4 blocks was used, with irrigated and rainfed systems being plots and 4 planting depths (0.20 m, 0.40 m, 0.60 m and 0.80 m) subplots. Seedlings aged 90 days and 2 m in height were used. Before planting, all stem leaves were removed from seedlings to be buried and to IBA at concentration of 4,000 mg kg-1 was applied. The number of fruits per plant, average fruit mass and total productivity and of 1st and 2nd crops, as well as total soluble solids (TSS), total titratable acidity (TTA), ratio (TSS/TTA), commercial and equatorial diameter classification were estimated. Irrigated planting at depths of 0.20 m and 0.40 m was more productive in the first crop, but there was no difference in the total productivity and in the second crop. Neither irrigation nor plant depth altered the chemical quality of fruits and commercial classification.

scholarly journals YIELD, PHYSIOLOGICAL QUALITY AND CHEMICAL COMPOSITION OF PHASEOLUS VULGARIS SEEDS, PRODUCED IN THE STATE OF RIO GRANDE DO SUL, BRAZIL

2020 ◽  
Vol 22 (2) ◽  
pp. 224-239
Author(s):  
Tiago Pedó ◽  
Angelita Celente Martins ◽  
Dominique Dos Santos Delias ◽  
Emanuela Garbin Martinazzo ◽  
Vinícius Jardel Szareski ◽  
...  
Keyword(s):  
Chemical Composition ◽  
Starch Content ◽  
Block Design ◽  
Soluble Sugar ◽  
Soluble Sugars ◽  
Experimental Unit ◽  
Agricultural Crops ◽  
Randomized Block Design ◽  
Physiological Quality

The objective of this study was to evaluate the yield and physiological quality of bean seeds in two agricultural crops, and the chemical composition of seedlings submitted to adverse temperatures during germination. For the field experiment, a randomized block design was used, using five genotypes, BRS Embaixador, IPR Tuiuiú, Guabiju, Carioquinha and Mouro, arranged in four replicates. The experimental units were composed of five lines with five meters in length, where 25 plants were randomly collected per experimental unit to measure the characters of interest. For laboratory testing the seeds produced were submitted to three temperatures (15, 25 and 35°C) during germination under controlled conditions. The evaluated characters were: grain yield, mass of a thousand seeds, germination, first germination count, starch content, soluble sugar, soluble protein and total amino acids. The data were submitted to analysis of variance and later compared by the Tukey test. Yield per plant revealed changes between the agricultural crops, as well as among the genotypes tested. Germination and the first germination count revealed higher magnitudes in seeds produced by BRS Embaixador, IPR Tuiuiu and Carioquinha genotypes. For all genotypes, protein and amino acid levels were higher in seedlings submitted to lower temperatures. The levels of starch and total soluble sugars were higher in seedlings produced at 35°C. Yield, seed physiological quality and chemical composition of seedlings are influenced by the crop and genotypes tested.

scholarly journals Influence of the main stem pruning and fruit thinning on quality of melon

Revista CERES ◽  
2016 ◽  
Vol 63 (6) ◽  
pp. 789-795
Author(s):  
Rafaella Martins de Araújo Ferreira ◽  
Edna Maria Mendes Aroucha ◽  
Cristiane Alves de Paiva ◽  
José Francismar de Medeiros ◽  
Flavinicíus Pereira Barreto
Keyword(s):  
Vitamin C ◽  
Management Practices ◽  
Fruit Size ◽  
Titratable Acidity ◽  
Main Stem ◽  
Soluble Solids ◽  
Postharvest Quality ◽  
Fruit Thinning ◽  
Flesh Firmness

ABSTRACT Among many management practices used in melon crops, those that change source: sink relationship, such as pruning and fruit thinning, directly influence production, affect fruit size and its composition, including sugar and vitamin contents. The objective of this study was to evaluate the influence of pruning of the main stem and time of fruit thinning in melon postharvest quality. Thus, two experiments were set up in Mossoró, state of Rio Grande do Norte, each with a melon hybrid (Amaregal and Banzai). Each experiment was conducted in a randomized block, in a (2 x 4) + 1 factorial design, 2 pruning management (with and without pruning), 4 levels of fruit thinning (3, 6, 9 and 12 DARB - days after removal agro textile blanket) and a control (without pruning and thinning), and four replications. Fruits were harvested at commercial maturity and transported to the Laboratory of Food Technology of UFERSA, where they were evaluated for the following characteristics: weight, diameter, length, flesh thickness, flesh firmness, soluble solids, pH, and titratable acidity, soluble solids: titratable acidity ratio and vitamin C. No interaction between factors in any of the experiments was found. Titratable acidity (0.077%) and vitamin C content (3.4 mg/100 g) in Amaregal melon and soluble solids (10.2%) in Banzai melon were lower in the treatments with stem pruning. In Amaregal melon, fruits showed longer length (134 mm) and greater flesh firmness (40 N) when thinning was carried out on 6 DARB, and as thinning was delayed, it found a decrease in the values of soluble solids, SS: TA ratio and pH. In Banzai melon, fruits showed greater flesh thickness (33.5 mm) and SS: TA (247.5) ratio when thinning was carried out on 6 DARB. However, delay in thinning promoted an increase in pH and vitamin C content of the fruits. Pruning of the main stem and thinning season had effect on the quality of Amaregal and Banzai melons in different ways.

scholarly journals Yield and quality of melon under silicon doses and irrigation management in a greenhouse

2018 ◽  
Vol 48 (2) ◽  
pp. 140-146
Author(s):  
Cláudia Salim Lozano ◽  
Roberto Rezende ◽  
Tiago Luan Hachmann ◽  
Fernando André Silva Santos ◽  
Marcelo Zolin Lorenzoni ◽  
...  
Keyword(s):  
Nutrient Management ◽  
Block Design ◽  
Irrigation Management ◽  
Soluble Solids ◽  
Irrigation Level ◽  
Yield And Quality ◽  
Randomized Block Design ◽  
Maturation Index ◽  
Irrigation Levels

ABSTRACT The netted melon requires special growing conditions, including a protected environment, an adequate staking system and proper water and nutrient management. This study aimed to assess the effect of irrigation levels and silicon doses on the yield and quality of Sunrise hybrid melons, in a greenhouse. A randomized block design was used, with a 5 x 3 factorial scheme and four replications. The first factor consisted of five silicon doses (0 kg ha-1, 50 kg ha-1, 100 kg ha-1, 150 kg ha-1 and 200 kg ha-1) and the second of three irrigation levels (40 %, 70 % and 100 % of the ETc). The results demonstrated that the applied irrigation levels and silicon doses have no influence on the yield traits of melon plants. The irrigation level corresponding to 100 % of the ETc promotes higher values for soluble solids (9.86 ºBrix) and maturation index (114.9) on fruits. The increase of silicon doses up to 200 kg ha-1 also increases the maturation index in the treatment with the greatest irrigation level and reduces this index at the shallowest level applied.

scholarly journals Post-harvest quality of ‘Vitória’ pineapple as a function of the types of shoots and age of the plant for floral induction

2018 ◽  
Vol 40 (4) ◽  
Author(s):  
Dayane Littig Barker ◽  
Sara Dousseau Arantes ◽  
Edilson Romais Schmildt ◽  
Lúcio de Oliveira Arantes ◽  
Patrícia Soares Furno Fontes ◽  
...  
Keyword(s):  
Significant Interaction ◽  
Floral Induction ◽  
Block Design ◽  
Soluble Solids ◽  
Post Harvest ◽  
Randomized Block Design ◽  
Different Types ◽  
Crown Biomass ◽  
Induction Times

Abstract For the production and quality of pineapple fruits, the appropriate choice of the type of propagule to be used combined with the management of the ages for floral induction are important factors to reach the maximum of desirable characteristics that will define the success in the production of the pineapple and its good acceptance in the market. The objective of this research was to evaluate the post-harvest quality of fruits developed from different types of shoots and ages of floral induction of ‘Vitória’ pineapple. The experiment was carried out in a complete randomized block design with four replications. The plots were made up of the shoots (slip and sucker) and the subplots were composed of the different ages of floral induction (8, 10 and 12 months after planting and natural flowering). Evaluations of biomass characteristics of fruits with and without crown, circumference, length, diameter, firmness, translucency, pulp color and physicochemical quality were performed. No significant interaction was observed for the biometric and biomass variables, and the type of shoots influenced only the crown biomass and the central cylinder diameter, which were higher in the slips. In addition, for the attributes color, translucent area and firmness, no interaction was found, and they were influenced only by the induction times, except for the variable color referring to the intensity of green and red colors. Regardless of the types of the shootss evaluated in the environmental conditions of planting carried out in April 2015, the fruits originated from natural inductions and inductions at 12 months presented greater firmness, a desirable characteristic for export and industrialization, mainly for the processing of slices of pineapple, pieces in syrup and crystallized. The slips natural induced and induced at 12 months provided fruits with a greater ratio between soluble solids and acidity.

scholarly journals Quality of Italian tomatoes grown with different forms of calcium application

2020 ◽  
Vol 9 (12) ◽  
pp. e10191210837
Author(s):  
Isa Gabriela Vieira de Andrade ◽  
Gilmário Noberto de Souza ◽  
Eduardo Santana Aires ◽  
Ítala Laiane Silva Gomes ◽  
Ruy de Carvalho Rocha ◽  
...  
Keyword(s):  
Block Design ◽  
Titratable Acidity ◽  
Soluble Solids ◽  
Fruit Firmness ◽  
Post Harvest ◽  
Randomized Block Design ◽  
Randomized Design ◽  
Tree Fruits ◽  
Fruit Mass

Tomato is one of the most consumed vegetables in the world. This work aimed to evaluate post-harvest quality of Italian Saladete tomatoes grown in a protected environment, with different ways of calcium application, in the Middle São Francisco Valley. Consisting of five Italian tomato hybrids (Anjico, Gabrielle, Liberty, Ty 2006 and Shanty), and three different ways of calcium application (T0 without application of calcium; T1 application of calcium in the opening flower, and T2 weekly application of calcium in the fruit).  Poductivity, average fruit mass, incidence of apical rot, fruit firmness, soluble solids (SS), titratable acidity (AT), and pH, were analized. The experimental design used was a completely randomized block design in a factorial scheme (five cultivars x three ways of calcium application), with three repetition and using two central plants as useful plot for analysis, except for fruit firmness that was carried out in a completely randomized design, using tree fruits per analysis. According to the results obtained, hybrids of Italian saladete tomatoes behaved in a satisfactory manner, therefore it is recommended to cultivate hybrids of Italian saladete tomatoes in the Middle São Francisco Valley, mainly hybrid Anjico. Calcium application way did not interfere with post-harvest attributes.

Sign in / Sign up

Export Citation Format

Share Document