scholarly journals Experiments on Stability of Tetrapods on Rear Slope of Rubble Mound Structures under Wave Overtopping Condition

2021 ◽  
Vol 33 (6) ◽  
pp. 357-366
Author(s):  
Young-Taek Kim ◽  
Jong-In Lee
Keyword(s):  
Water Level ◽  
Design Process ◽  
Weight Ratio ◽  
Stability Number ◽  
Wave Overtopping ◽  
Design Standard ◽  
Side Slope ◽  
Rubble Mound ◽  
The Stability ◽  
Design Water Level

In this study, hydraulic model tests were performed to investigate the stability of armor units at harbor side slope for rubble mound structures. The Korean design standard for harbor and fishery port suggested the design figures that showed the ratio of the armor weight for each location of rubble mound structures and it could be known that the same weight ratio was needed to the sea side and harbor side (within 0.5H from the minimum design water level) slope of rubble mound structures. The super structures were commonly applied to the design process of rubble mound structures in Korea and the investigation of the effects of super structures would be needed. The stability number (Nod = 0.5) was applied (van der Meer, 1999) and it showed that the armor (tetrapod) weight ratio for harbor side slope of rubble mound structures needed 0.8 times of that for sea side slope.

scholarly journals STABILITY OF HIGH DENSITY CUBES IN RUBBLE MOUND BREAKWATERS

2020 ◽  
pp. 4
Author(s):  
Yalcin Yuksel ◽  
Marcel van Gent ◽  
Esin Cevik ◽  
H. Alper Kaya ◽  
Irem Gumuscu ◽  
...  
Keyword(s):  
Relative Density ◽  
Slope Angle ◽  
High Density ◽  
Experimental Results ◽  
Normal Density ◽  
Stability Number ◽  
Damage Initiation ◽  
Rubble Mound ◽  
The Stability ◽  
Rubble Mound Breakwaters

The stability number for rubble mound breakwaters is a function of several parameters and depends on unit shape, placing method, slope angle, relative density, etc. In this study two different densities for cubes in breakwater armour layers were tested to determine the influence of the density on the stability. The experimental results show that the stability of high density blocks were found to be more stable and the damage initiation for high density blocks started at higher stability numbers compared to normal density cubes.

scholarly journals IRREGULAR WAVE TESTS FOR COMPOSITE BREAKWATER FOUNDATIONS

1982 ◽  
Vol 1 (18) ◽  
pp. 128 ◽  
Author(s):  
Katsutoshi Tanimoto ◽  
Tadahiko Yagyu ◽  
Yoshimi Goda
Keyword(s):  
Wave Height ◽  
Significant Wave Height ◽  
Irregular Waves ◽  
Stability Number ◽  
Regular Waves ◽  
Significant Wave ◽  
Irregular Wave ◽  
Concrete Blocks ◽  
Rubble Mound ◽  
The Stability

The stability of armor units for the rubble mound foundations of composite breakwaters has been investigated under the action of irregular waves. The tests establish that irregular waves are more destructive than regular waves, when the height of regular waves is set equal to the significant wave height. The stability number, defined by Hudson, for quarry stones and concrete blocks with simple shapes is formulated on the basis of irregular wave tests. The stability number is expressed by two parameters of h'7/7]/3 and K, where h' is the crest depth of the rubble mound foundation, #1/3 is the design significant wave height, and K is a parameter for the combined effects of the relative water depth and the relative berm width of the rubble mound foundation to the wavelength. The design mass of armor units can be calculated by the stability equation with the stability number. The application of the proposed method to the results of the irregular wave tests demonstrates that the damage percent for the quarry stones is at most 3.5% at the design condition and the damage progresses rather gradually for the action of higher waves. On the other hand, the damage of the concrete blocks almost jumps beyond the design wave height. In particular, the drastic damage is often caused in the case of high rubble mound foundations. The proposed method is confirmed, however, to be applicable for the ordinary low mound foundations with a sufficient safety.

scholarly journals Least Squares Support Vector Mechanics to Predict the Stability Number of Rubble-Mound Breakwaters

Water ◽  
2018 ◽  
Vol 10 (10) ◽  
pp. 1452 ◽  
Author(s):  
Nuray Gedik
Keyword(s):  
Neural Networks ◽  
Artificial Neural Networks ◽  
Least Squares ◽  
Soft Computing ◽  
Support Vector ◽  
Stability Number ◽  
Experimental Works ◽  
Rubble Mound ◽  
The Stability ◽  
Rubble Mound Breakwaters

In coastal engineering, empirical formulas grounded on experimental works regarding the stability of breakwaters have been developed. In recent years, soft computing tools such as artificial neural networks and fuzzy models have started to be employed to diminish the time and cost spent in these mentioned experimental works. To predict the stability number of rubble-mound breakwaters, the least squares version of support vector machines (LSSVM) method is used because it can be assessed as an alternative one to diverse soft computing techniques. The LSSVM models have been operated through the selected seven parameters, which are determined by Mallows’ Cp approach, that are, namely, breakwater permeability, damage level, wave number, slope angle, water depth, significant wave heights in front of the structure, and peak wave period. The performances of the LSSVM models have shown superior accuracy (correlation coefficients (CC) of 0.997) than that of artificial neural networks (ANN), fuzzy logic (FL), and genetic programming (GP), that are all implemented in the related literature. As a result, it is thought that this study will provide a practical way for readers to estimate the stability number of rubble-mound breakwaters with more accuracy.

scholarly journals EXPERIMENTS ON THE EFFECT OF FREEBOARD ON THE STABILITY OF A BREAKWATER CROWN WALL

2018 ◽  
pp. 9
Author(s):  
Jeroen Bekker ◽  
Bas Hofland ◽  
Greg Smith
Keyword(s):  
Global Stability ◽  
Water Level ◽  
Transition Region ◽  
Experimental Research ◽  
Contact Surface ◽  
Reduction Factor ◽  
Design Methods ◽  
Current Design ◽  
Rubble Mound ◽  
The Stability

A crown wall is a gravity based structure on top of a rubble mound breakwater which gains stability due to its own weight and friction between the base and contact surface of the rubble mound. An experimental research is carried out in which the global stability of a crown wall is investigated depending on, amongst other things, freeboard. Until now, these structures tend to be designed in a too conservative way, when the vertical distance between base slab and water level (base freeboard) increases. It was concluded that current design methods overpredict vertical loads for increasing freeboard. By implementing a reduction factor for the upward pressure acting on the base slab of the crown wall, a better prediction can be made for the transition region between stability and failure.

Evaluation of Non-Vibrating Utility Burner/Furnace Systems for Resistance to Thermoacoustic Oscillations

2006 ◽  
Author(s):  
Frantisek L. Eisinger ◽  
Robert E. Sullivan
Keyword(s):  
Design Process ◽  
Axial Direction ◽  
Stability Diagram ◽  
Stable Range ◽  
Design Engineers ◽  
Secondary Role ◽  
The Stability ◽  
Thermoacoustic Oscillations

Six burner/furnace systems which operated successfully without vibration are evaluated for resistance to thermoacoustic oscillations. The evaluation is based on the Rijke and Sondhauss models representing the combined burner/furnace (cold/hot) thermoacoustic systems. Frequency differences between the lowest vulnerable furnace acoustic frequencies in the burner axial direction and those of the systems’ Rijke and Sondhauss frequencies are evaluated to check for resonances. Most importantly, the stability of the Rijke and Sondhauss models is checked against the published design stability diagram of Eisinger [1] and Eisinger and Sullivan [2]. It is shown that the resistance to thermoacoustic oscillations is adequately defined by the published design stability diagram to which the evaluated cases generally adhere. Once the system falls into the stable range, the frequency differences or resonances appear to play only a secondary role. It is concluded, however, that in conjunction with stability, the primary criterion, sufficient frequency separations shall also be maintained in the design process to preclude resonances. The paper provides sufficient details to aid the design engineers.

scholarly journals RELIABILITY BASED DESIGN OF RUBBLE-MOUND BREAKWATER

1988 ◽  
Vol 1 (21) ◽  
pp. 153
Author(s):  
Masato Yamamoto ◽  
Kazumasa Mizumura ◽  
Taiji Endo ◽  
Naofumi Shiraishi
Keyword(s):  
Water Level ◽  
Optimum Design ◽  
Failure Probability ◽  
Design Methodology ◽  
Construction Cost ◽  
Probabilistic Design ◽  
Reliability Based Design ◽  
Rubble Mound ◽  
Reduced Risk

The object of this present research is to study probabilistic design of armor blocks protecting composite breakwaters and to produce optimum design methodology for S-shaped breakwaters in terms of failure probability and construction cost. Failure probability in the vicinity of the still water level is greatest in the case of uniform sloped breakwaters. Therefore,S-shaped breakwaters of which the slope near the still water level is milder have a reduced risk of damage compared to uniform sloped ones. The optimum design index presents good economics and reliability in rubble-mound breakwater design.

Sign in / Sign up

Export Citation Format

Share Document