Novel Trends in Dental Color Match Using Different Shade Selection Methods: A Systematic Review and Meta-Analysis

Since color matching is considered a subjective procedure, accurate shade choice is often the most challenging stage of recreating the natural appearance of teeth. Furthermore, accurate determination of tooth color is imperative for the final outcome of dental restorations. The purpose of this research is to assess the accuracy of color match between diverse shade selection methods throughout a systematic review and meta-analysis. Two independent investigators (L.H. and R.B.) screened the literature in five electronic databases. Randomized controlled trials or in vitro papers studying the effect of using either digital shade selection or visual shade selection on the accuracy of color match were included. A total of 13 manuscripts comprised the meta-analysis. Color difference (ΔE) between restorations where the shade matching was performed by the conventional method was greater than those where the shade matching was performed by computerized methods (p = 0.007). According to the subgroup analysis, only the use of digital photographs for shade matching showed a reduction in the (ΔE) (p < 0.0001), while the use of a spectrophotometer has no advantages over the use of visual shade guide tabs (p = 0.57). On the other hand, global analysis showed that incorrect shade matching was higher when the conventional method using shade guide tabs was used (p < 0.001), irrespective of whether a spectrophotometer or a digital camera was used (p < 0.001). This study concluded that the use of digital photography and spectrophotometric measurements led to fewer color differences and less incorrect shade matching than conventional methods using color shade tabs.

ATLAS 5005

Atlas 5005 is a non-heat-treatable, aluminum-magnesium alloy. This alloy has been widely adopted for anodized architectural panels. With correct rolling practices and composition controls, Atlas 5005 architectural sheet provides exceptionally high-quality surfaces after anodizing. The architectural products produced from this alloy are used on many high-end building projects to meet customer specifications for uniformity and color match. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Al-482. Producer or source: Atlas Steels.

Color printing on pre-colored textiles

Managing color on a particular imaging system is a wellunderstood challenge with a wealth of existing models, methods and techniques. In the case of printing systems, these tend to operate in the context of a single substrate, where managing color on every additional substrate is approach as a separate, detached problem. While such a mind-set works reasonably well in general, it breaks down when it comes to printing onto precolored textiles, such as pre-dyed fabrics. The present paper therefore introduces a family of approaches that support the use of multiple pre-colored textiles on a given printing system that also allow for a balance between characterization effort and color match accuracy. This, in turn provides solutions that can fit a variety of practical working patterns to maximize overall efficiency and performance.

Survival of Hybrid Laminate Veneers using two different tooth preparation techniques: Randomized Clinical Trial

The aim of this study was to evaluate the survival of laminate veneers constructed using a recent polymer-infiltrated ceramic network material following the aesthetic pre-evaluative temporary (APT) technique of tooth preparation in comparison to traditional technique. Six patients received 54 laminate veneers. They were divided into two equal groups (n=27) according to the technique of tooth preparation: group T: traditional technique and group A: aesthetic pre-evaluative temporary technique. VITA ENAMIC material was used for CAD/CAM construction of laminate veneers. Cementation was performed using a light cured resin cement. The laminate veneers were evaluated at baseline, after 3, 6 and 12 months according to the modified United States Public Health Service (USPHS) criteriea. The data was collected, tabulated and statistically analyzed. Secondary caries, endodontic complications, cracks and loss of retention were not noted in any laminate veneer. Extensive fractures were not detected in both study groups through the study period. There was a statistically significant decrease of color match criteria between the two groups at the 6 and 12 months recalls. Based on this study, both preparation techniques resulted in successful clinical performance. After 12 months, all the veneers in both groups showed no post-operative sensitivity and all patients were highly satisfied regarding their veneers. However, there was a deterioration in color match criteria through the study period in both study groups.

Clinical Comparison of MEBO and Hyaluronic Acid Gel in the Management of Pain after Free Gingival Graft Harvesting: A Randomized Clinical Trial

Aim. This study aimed to compare the effect of MEBO versus 0.2% hyaluronic acid gel (Gengigel®) applied to the palatal donor site on postoperative pain reduction and wound healing after free gingival graft harvesting. Methodology. Thirty-nine patients with different mucogingival defects were included in this study for harvesting a free gingival graft (FGG) for soft tissue augmentation. Patients were randomly assigned into three equal groups: group I (MEBO), group II (0.2% HA Gengigel®), and group III (control). Postoperative pain was recorded by using the Visual Analogue Scale (VAS). Analgesic consumption was recorded for 7 days postoperatively. Wound size was measured at baseline and on days 3, 7, 14, and 21. Postoperative healing of the palatal wound was assessed by the VAS score for color match on days 3, 7, 14, 21, and 42. Results. Results of this study showed significant postoperative pain reduction for the three groups; MEBO showed statistically significant less VAS score compared to the other two groups, while HA showed statistically significant less VAS score compared to the control group. Both MEBO and HA showed statistically significant less total analgesic consumption. No statistically significant difference was observed between groups for wound size. MEBO showed statistically significant higher VAS for color match. Conclusions. Both treatment modalities could reduce postoperative pain following harvesting of FGG and improve the palatal wound healing. However, MEBO showed better outcomes in terms of postoperative pain and color match.

Influence of Varying Dentin and Enamel Layer Thicknesses of Nano-composite Resins on Color Match between Lithium Disilicate Dental Ceramic and Composite Resins

Objectives: The aim of this study was to evaluate the influence of varying dentin and enamel layer thicknesses of two nano-composite resins on color match of composite resins and lithium disilicate dental ceramic. Materials and Methods: Twenty-six specimens of two types of nano-composite resins, Opallis and Vittra, were fabricated using the two-layered technique with different thickness ratios of enamel and dentin composites (A2 shade) with a total thickness of 1.2mm. Thirteen discs of the same shade and thickness of IPS e.max Press LT (low translucency) lithium disilicate dental ceramic were also fabricated. Specimen color was measured with a spectrophotometer. The difference in color (ΔE00) of composite and ceramic specimens, and the translucency parameter (TP) of all specimens were calculated. Data were analyzed using multi-factor ANOVA (P<0.05). Results: The color difference (ΔE00) values of composites and ceramic were not clinically acceptable in any areas of either of the two composites (ΔE00>2.25). But ΔE00 between the two composite resins was in the clinically acceptable range (ΔE00<2.25). The mean TP value of IPS e.max Press was greater than that of Vittra and lower than that of Opallis. Conclusion: In similar thicknesses, composite resins with any enamel/dentin thickness ratio could not successfully simulate the color and translucency of IPS e.max Press LT ceramic.

Reconstruction of a Large Oncologic Defect Involving Lower Eyelid and Infraorbital Cheek Using MSTAFI Flap

An oncologic defect that includes both the lower eyelid and the infraorbital cheek often results in complex reconstructive problems because its reconstruction involves 2 distinct tissue types and cosmetic subunits. Herein, we first present a novel combination of modified supratrochlear artery forehead island flap and advancement rotation cheek flap enables reconstructing a large oncologic defect of lower eyelid and infraorbital cheek. Although discoid lupus erythematosus affects the skin, the patient had achieved a satisfying color match and an acceptable aesthetic restoration without tumor recurrence. This novel flap has shown to be feasible, reliable, and advantageous alternative to the repair of such defects.