Galvanotaxis of ciliates: Spatiotemporal dynamics of Coleps hirtus under electric fields

Galvanotaxis describes the functional response of organisms to electric fields. In ciliates, the electric field influences the electrophysiology and thus the cilia beat dynamics. This leads to a change of the swimming direction towards the cathode. The dynamical response to electric fields of Coleps hirtus has not been studied since the observations of Verworn in 1890 (1). While galvanotaxis has been studied in other cilitates, C. hirtus exhibit properties not found elsewhere, such as biomineralization-processes of alveolar plates with impact on the intracellular calcium regulation and a bimodal resting membrane potential, which leads unique electrophysiological driven bimodal swimming dynamics. Here, we statistically analyze the galvanotactic dynamics of C. hirtus by automated cell tracking routines. We found that the number of cells that show a galvanotactic response, increases with the increase of the applied electric field strength with a mean at about 2.1 V/cm. The spatiotemporal swimming dynamics change and lead to a statistical increase of linear elongated cell trajectories that point toward the cathode. Further, the increase of the electric fields decreases the mean velocity variance for electric fields larger than about 1.3 V/cm, while showing no significant change in the absolute velocity for any applied electric field. Fully functional galvanotactic responses were observed at a minimum extracellular calcium concentration of 20 μM. The results add important insights to the current understanding of cellular dynamics of ciliates and suggest that the currently accepted model lags the inclusion of the swimming dynamics and the complex calcium regulatory system of the cell. The results of this study do not only extend the fundamental understanding of C. hirtus dynamics, but also open possibilities for technical applications, such as biosensors or microrobots in the future.

Both Symmetric and Asymmetric Electro-Optic Dynamic Behavior with SSD (Smectic Single Domain) Liquid Crystals

SSD-liquid crystal panels’ retardation switching dynamic behaviors have been investigated from their in-plane and out-of-plane retardation switching behaviors. In-plane-only and a mixture between in-plane and out-of-plane retardation switching behaviors are highly related to the initial smectic liquid crystal molecular stacking configurations. With uniformly stacked configuration, a completely symmetric retardation switching, as well as light throughput behavior, was obtained. With a slight twisted stacking configuration, the retardation switching behavior is dependent on the applied electric field strength, which may change the initial molecular stacking configuration, resulting in either symmetric or asymmetric retardation switching. When the molecular stacking has twisted heavily, the obtained retardation switching showed asymmetric behavior regardless of the applied electric field strength.

Temperature and Field Induced Variations of Electric Conductivities of HTV Silicone Rubbers Derived from Measured Currents and Surface Potential Decay Characteristics

The temperature and field dependencies of electric conductivities of two types of silicone rubber-based polymers intended for use in high voltage direct current applications are presented and discussed. The conductivities obtained with the standard method by measuring a current through the material sample placed between metallic electrodes in response to the applied voltage are compared with those deduced from the measured potential decay on pre-charged material surface in an open circuit configuration. The measurements were conducted in the range of the applied electric field strength (0.5–5) kV/mm and temperatures ranging from 22 °C to 70 °C. It is shown that the values of the conductivities obtained by the two methods are in agreement and their temperature dependences obey Arrhenius law yielding similar activation energies.

An Electroporation Device with Microbead-Enhanced Electric Field for Bacterial Inactivation

This paper presents an electroporation device with high bacterial inactivation performance (~4.75 log removal). Inside the device, insulating silica microbeads are densely packed between two mesh electrodes that enable enhancement of the local electric field strength, allowing improved electroporation of bacterial cells. The inactivation performance of the device is evaluated using two model bacteria, including one Gram-positive bacterium (Enterococcus faecalis) and one Gram-negative bacterium (Escherichia coli) under various applied voltages. More than 4.5 log removal of bacteria is obtained for the applied electric field strength of 2 kV/cm at a flowrate of 4 mL/min. The effect of microbeads on the inactivation performance is assessed by comparing the performance of the microbead device with that of the device having no microbeads under same operating conditions. The comparison results show that only 0.57 log removal is achieved for the device having no microbeads—eightfold lower than for the device with microbeads.

An Integrated Photonic Electric-Field Sensor Utilizing a 1 × 2 YBB Mach-Zehnder Interferometric Modulator with a Titanium-Diffused Lithium Niobate Waveguide and a Dipole Patch Antenna

We studied photonic electric-field sensors using a 1 × 2 YBB-MZI modulator composed of two complementary outputs and a 3 dB directional coupler based on the electro-optic effect and titanium diffused lithium–niobate optical waveguides. The measured DC switching voltage and extinction ratio at the wavelength 1.3 μm were ~16.6 V and ~14.7 dB, respectively. The minimum detectable fields were ~1.12 V/m and ~3.3 V/m, corresponding to the ~22 dB and ~18 dB dynamic ranges of ~10 MHz and 50 MHz, respectively, for an rf power of 20 dBm. The sensor shows an almost linear response to the applied electric-field strength within the range of 0.29 V/m to 29.8 V/m.

Optical properties of monolayer BeC under an external electric field: A DFT approach

BeC, a two-dimensional hypercoordinated nanostructure carbon compound, has been the focus of the nanoworld because of its high value of dynamical stability, in-plane stiffness, carrier mobility and the existence of band gap. In this work, we have explored the electronic and the optical properties of this material under the influence of static external perpendicular electric field within the framework of density functional theory. Under the influence of a uniform electric field, the band gap changes within the meV range. The electron energy loss function study reveals that this material has optical band gaps which remain constant irrespective of the applied electric field strength. The optical property also exhibits interesting features when the applied field strength is within 0.4–0.5 V/Å. We have also tried to explain the optical data from the respective band structures and thus paving the way to understand qualitatively the signature of the optical anisotropy from the birefringence study.

Температурная зависимость порогового тока и выходной мощности квантово-каскадного лазера с частотой генерации 3.3 ТГц

The active region of a THz (terahertz) quantum-cascade laser based on three tunnel-coupled GaAs/Al_0.15Ga_0.85As quantum wells with a resonance-phonon depopulation scheme is designed. Energy levels, matrix elements of dipole transitions, and gain spectra are calculated as functions of the applied electric-field strength F and temperature. It is shown that the maximum gain is implemented at a frequency of 3.37 THz and F = 12.3 kV/cm. Based on the proposed design, a quantum-cascade laser emitting at ~3.3 THz with a double metal waveguide and T _max ~ 84 K is fabricated. The activation energy E _ a = 23 meV for longitudinal-optical (LO) phonon emission upon the stimulated recombination of hot electrons from the upper laser level to the lower one is determined from the Arrhenius temperature dependence of the output power.

Electrorheological response of polyaniline and its hybrids

One of the remarkable applications of conducting polymers is as an electrorheological (ER) fluid which is a smart suspension of polarisable particles dispersed in an insulating liquid with the capacity to effect a phase transition from a liquid-like to a solid-like state. Polyaniline (PANI) and its hybrids with inorganics or other polymers are active candidates for ER materials due to their various advantages, e.g., easy synthesis, controllable conductivity, and less friction than pure inorganics. In this short review, we review recent progress in the synthesis of semi-conducting PANI and its hybrids with diverse morphologies and their ER performance measured by a rotational rheometer using the applied electric field strength. The dielectric properties of these ER fluids, as an important analytical method for their ER performance, are also discussed.

SHALLOW DONOR IMPURITY BINDING ENERGY IN A QUANTUM WIRE WITHIN AN ELECTRIC FIELD

The method of two variational wavefunctions has been used to calculate theoretically the impurity binding energy in a GaAs/Ga 1-x Al x As quantum wire. The effective potential in the quantum wire consists of a parabolic well potential in the x-direction and a square well potential in the z-direction with an applied electric field. We can obtain the results which are in good agreement with previous theoretical results. Furthermore, the impurity binding energy in the quantum wire is sensitive to the geometrical effects and the applied electric field strength F.