sediment loading
Recently Published Documents


TOTAL DOCUMENTS

141
(FIVE YEARS 27)

H-INDEX

23
(FIVE YEARS 4)

Water ◽  
2021 ◽  
Vol 14 (1) ◽  
pp. 24
Author(s):  
Ehab Meselhe ◽  
Ahmed M. Khalifa ◽  
Kelin Hu ◽  
James Lewis ◽  
Ahmad A. Tavakoly

A Delft3D morphodynamic model for Barataria Bay, Louisiana, USA is used to quantify a plausible range of land change in response to a proposed sediment diversion under a range of environmental drivers. To examine the influence of environmental drivers, such as Mississippi River water hydrographs, mineral and organic sediment loading, sea level rise rates, subsidence, and a projected implementation (or operation) date, 240 multi-decadal (2020–2100) numerical experiments were used. The diversion was assumed to begin operation in 2025, 2030, or 2035. The experiments revealed persistent benefits of the sediment diversion through 2100. Start data of 2025 result in a median net positive land change of 32 km2 by 2100; whereas the 90th, and 10th percentiles are 69 and 10 km2. A delay in the operation date of the diversion to 2030 or 2035 would reduce the net positive land change by approximately 15–20% and 20–30%, respectively.


2021 ◽  
Author(s):  
Muhammad Hassaan ◽  
Jan Inge Faleide ◽  
Roy Helge Gabrielsen ◽  
Filippos Tsikalas ◽  
Silje Grimstad

2021 ◽  
Author(s):  
John Shelley

This US Army Corps of Engineers (USACE) National Regional Sediment Management Technical Note (RSM-TN) documents the effects of increased sediment loading to the Missouri River on bed elevations in the lower 498 miles. This was accomplished using a one-dimensional (1D) HEC-RAS 5.0.7 sediment model.


2021 ◽  
Vol 9 (1) ◽  
pp. 43
Author(s):  
Herman Harijanto ◽  
Abdul Wahid ◽  
Arief Sudhartono ◽  
Nikteri Perori

The research purpose was to determine of floating sediment loading rate which transported along Wimbi river water runoff and analyzed the relationship between water discharge with floating sediment discharge in the Wimbi river. The method used in this study was a survey method, namely by conducting direct measurements in the field, including: measurement of water discharge and water sampling for analysis of floating sediment content. Parameter  measured for the purpose of analyzing the sediment loading rate, namely floating sediment concentration Cs (mg / l), river water discharge Q (m3 / sec) and floating sediment discharge Qs (kg / sec). The relationship between water discharge and sediment discharge was analyzed using a suspended sediment rating curve. The results showed the flow of river water flowing at the cross section of the Wimbi river ranged from 0.88 m3 / sec - 13.7 m3 / sec (average of 6.17 m3 / sec). Furthermore, the height of the water level (H) flowing in the cross section of the Wimbi river ranged from 0.5 to 1.84 m with  average = 1.14m. Sediment loading rates float in the Wimbi river ranged from 2.110 - 99.511kg / sec (average of 35.222 kg / sec). The analyzed results of the relationship between water discharge and floating sediment discharge obtained a positive relationship with a correlation value of 0.96.


Drones ◽  
2021 ◽  
Vol 5 (1) ◽  
pp. 20
Author(s):  
Joseph P. Hupy ◽  
Cyril O. Wilson

Soil erosion monitoring is a pivotal exercise at macro through micro landscape levels, which directly informs environmental management at diverse spatial and temporal scales. The monitoring of soil erosion can be an arduous task when completed through ground-based surveys and there are uncertainties associated with the use of large-scale medium resolution image-based digital elevation models for estimating erosion rates. LiDAR derived elevation models have proven effective in modeling erosion, but such data proves costly to obtain, process, and analyze. The proliferation of images and other geospatial datasets generated by unmanned aerial systems (UAS) is increasingly able to reveal additional nuances that traditional geospatial datasets were not able to obtain due to the former’s higher spatial resolution. This study evaluated the efficacy of a UAS derived digital terrain model (DTM) to estimate surface flow and sediment loading in a fluvial aggregate excavation operation in Waukesha County, Wisconsin. A nested scale distributed hydrologic flow and sediment loading model was constructed for the UAS point cloud derived DTM. To evaluate the effectiveness of flow and sediment loading generated by the UAS point cloud derived DTM, a LiDAR derived DTM was used for comparison in consonance with several statistical measures of model efficiency. Results demonstrate that the UAS derived DTM can be used in modeling flow and sediment erosion estimation across space in the absence of a LiDAR-based derived DTM.


2021 ◽  
Vol 277 ◽  
pp. 111420
Author(s):  
Se Jong Cho ◽  
Christian A. Braudrick ◽  
Christine L. Dolph ◽  
Stephanie S. Day ◽  
Brent J. Dalzell ◽  
...  

2020 ◽  
Vol 15 (12) ◽  
pp. 124044
Author(s):  
Nicholas Hutley ◽  
Mandus Boselalu ◽  
Amelia Wenger ◽  
Alistair Grinham ◽  
Badin Gibbes ◽  
...  

2020 ◽  
Vol 223 (21) ◽  
pp. jeb225045
Author(s):  
Danielle M. Becker ◽  
Nyssa J. Silbiger

ABSTRACTCoral reefs, one of the most diverse ecosystems in the world, face increasing pressures from global and local anthropogenic stressors. Therefore, a better understanding of the ecological ramifications of warming and land-based inputs (e.g. sedimentation and nutrient loading) on coral reef ecosystems is necessary. In this study, we measured how a natural nutrient and sedimentation gradient affected multiple facets of coral functionality, including endosymbiont and coral host response variables, holobiont metabolic responses and percent cover of Pocillopora acuta colonies in Mo′orea, French Polynesia. We used thermal performance curves to quantify the relationship between metabolic rates and temperature along the environmental gradient. We found that algal endosymbiont percent nitrogen content, endosymbiont densities and total chlorophyll a content increased with nutrient input, while endosymbiont nitrogen content per cell decreased, likely representing competition among the algal endosymbionts. Nutrient and sediment loading decreased coral metabolic responses to thermal stress in terms of their thermal performance and metabolic rate processes. The acute thermal optimum for dark respiration decreased, along with the maximal performance for gross photosynthetic and calcification rates. Gross photosynthetic and calcification rates normalized to a reference temperature (26.8°C) decreased along the gradient. Lastly, percent cover of P. acuta colonies decreased by nearly two orders of magnitude along the nutrient gradient. These findings illustrate that nutrient and sediment loading affect multiple levels of coral functionality. Understanding how local-scale anthropogenic stressors influence the responses of corals to temperature can inform coral reef management, particularly in relation to the mediation of land-based inputs into coastal coral reef ecosystems.


2020 ◽  
Vol 146 (9) ◽  
pp. 04020064
Author(s):  
Chuan Li ◽  
Enrica Viparelli ◽  
Gary Parker

Sign in / Sign up

Export Citation Format

Share Document