COMPARISON OF THE EFFICIENCY OF DIFFERENT DETECTORS OF THE SCANNING ELECTRONIC MICROSCOPE «MIRA-LMH» FOR STUDYING MICROSTRUCTURE OF NANOMATERIALS

На первом этапе были синтезированы объекты исследования - диоксид кремния методом Штобера, где в качестве прекурсора использовали тетраэтоксисилан, и нанокомпозит ZnO - Au золь-гель методом с использованием в качестве прекурсора 2 - водного ацетата цинка. На втором этапе, микроструктуру и морфологию полученных образцов исследовали методом растровой электронной микроскопии на сканирующем электронном микроскопе «MIRA-LMH» фирмы «Tescan» с применением как классического детектора вторичных электронов, так и дополнительных детекторов - внутрилинзового детектора вторичных электронов и детектора отраженных электронов. В результате исследований установлено, что при использовании детектора вторичных электронов получаются изображения с топографическим контрастом и практически без шумов. При использовании внутрилинзового детектора вторичных электронов создаются изображения только материального контраста, без влияния рельефа поверхности. Также использование данного детектора позволило получить высококачественные изображения с большим разрешением на расстоянии от образца 5 мм. При использовании детектора отраженных электронов с рабочим расстоянием до образца 8 мм и увеличении разрешающей способности микроскопа, полученные изображения имеют низкий контраст границ, но представляют композиционную информацию с высокой чувствительностью. Таким образом, установлено, что внутрилинзовый детектор вторичных электронов, с рабочим расстоянием до образца 5 мм, является оптимальным для получения четких изображений микроструктры поверхности наноматериалов при многократном увеличении. At the first stage, the objects of study were synthesized - silicon dioxide by the Stober method, where tetraethoxysilane was used as a precursor, and a nanocomposite ZnO - Au by the sol-gel method using the aqueous zinc acetate dihydrate as a precursor. At the second stage, the microstructure and morphology of the obtained samples were investigated by scanning electron microscopy on a «MIRA-LMH» scanning electron microscope (Tescan company) using both a classical secondary electron detector and additional detectors - intralens secondary electron detector and back-scattered electrons detector. As a result of the research, it was found that when using the secondary electron detector, practically no noise images with topographic contrast are obtained. When using the intralens secondary electron detector, images of only material contrast are created, without the influence of the surface relief. Also, the use of this detector made it possible to obtain high-quality images with a high resolution at a distance of 5 mm from the sample. When using a back-scattered electrons detector with a working distance to the sample of 8 mm and increasing the resolution of the microscope, the resulting images have low border contrast, but represent compositional information with high sensitivity. Thus, it was found that the intralens secondary electron detector with a working distance of 5 mm to the sample is optimal for obtaining clear images of the microstructure of the surface of nanomaterials at multiple magnifications.

Ab initio phasing macromolecular structures using electron-counted MicroED data

Structures of two globular proteins were determined ab initio using microcrystal electron diffraction (MicroED) data that was collected on a direct electron detector in counting mode. Microcrystals were identified using a scanning electron microscope (SEM) and thinned with a focused ion-beam (FIB) to produce crystalline lamellae of ideal thickness. Continuous rotation data were collected using an ultra-low exposure rate on a Falcon 4 direct electron detector in electron-counting mode. For the first sample, triclinic lysozyme extending to 0.87 A resolution, an ideal helical fragment of only three alanine residues provided initial phases. These phases were improved using density modification, allowing the entire atomic structure to be built automatically. A similar approach was successful on a second macromolecular sample, proteinase K, which is much larger and diffracted to a modest 1.5 A resolution. These results demonstrate that macromolecules can be determined to sub-Angstrom resolution by MicroED and that ab initio phasing can be successfully applied to counting data collected on a direct electron detector.

Reconstruction algorithm of 3D surface in scanning electron microscopy with backscattered electron detector

A new technique for three-dimensional surface reconstruction of relatively smooth surface topography using the scanning electron microscopy with backscattered electron detector is considered. Experiments show high effectiveness of the method.

Protein and Organic-Molecular Crystallography With 300kV Electrons on a Direct Electron Detector

Electron 3D crystallography can reveal the atomic structure from undersized crystals of various samples owing to the strong scattering power of electrons. Here, a direct electron detector DE64 was tested for small and thin crystals of protein and an organic molecule using a JEOL CRYO ARM 300 electron microscope. The microscope is equipped with a cold-field emission gun operated at an accelerating voltage of 300 kV, quad condenser lenses for parallel illumination, an in-column energy filter, and a stable rotational goniometer stage. Rotational diffraction data were collected in an unsupervised manner from crystals of a heme-binding enzyme catalase and a representative organic semiconductor material Ph-BTBT-C10. The structures were determined by molecular replacement for catalase and by the direct method for Ph-BTBT-C10. The analyses demonstrate that the system works well for electron 3D crystallography of these molecules with less damaging, a smaller point spread, and less noise than using the conventional scintillator-coupled camera.