Non-Linear Optical Properties and Global Reactivity Descriptors by ab initio Hartree-Fock (H.F.) Calculations of Simple Coumarins

In this present analysis, the measurement of optimized molecular structure and molecular hyperpolarizability (βtotal) of simple coumarin molecules were investigated using the HF method at 6-311G basis set level Gaussian09W. The measured nonlinear optical parameters (NLO); polarizability (α), the anisotropy of the polarizability (Δα), and first-order molecular hyperpolarizability (βtotal) of the studied coumarins indicate promising optical properties. The energy difference between HOMO and LUMO helped determine the molecular descriptors; global hardness (η), softness (σ) electronegativity (χ) Chemical potential (μ), and electrophilicity index (ω) in gas and different solvents. The molecular hyperpolarizability (βtotal) and descriptors that have been calculated in the solvent medium were taken into consideration through the Polarizable Continuum Model (PCM), This study shows the high static hyperpolarizability exhibited by HNR, FXT, and CNT and offers the potential the materials may have for NLO devices. The molecular descriptors, hardness, and chemical potential values are high for CNT and UCAcompared to other studied coumarins. This suggested that CNT and CA have the most significant chemical potential resistance to change the number of electrons among the other molecules.

Effect of chlorine and bromine on the nonlinear optical, electronic, optoelectronic and thermodynamic properties on the BEDT-TTF molecule : Ab initio and DFT calculations

In this study, the RHF and B3LYP methods with cc-pVDZ basis set have been used to investigate the non-linear optical (NLO), electronic, optoelectronic and thermodynamic properties of bis (ethylenedithio) tetrathiafulvalene and its chlorine and bromine derivatives. The results show that the undoped molecule denoted BEDT-TTF or ET (Eg =3.88 eV) and its derivatives are semi-conductors materials. However, one of them, Br4ET molecule doped with bromine, considerably improves its energy band gap Eg =2.88 eV is less than 3 eV, which makes more ineresting electronic properties. Some parameters such as dipole moment, average polarizability and first order hyperpolarizability have been calculated. In order to compare the results of molecules and with those of Urea, we have computed first molecular hyperpolarizability ꞵ, doped structures (ET chlorinated and brominated) find applications in telecommunication, in modern communication technology and data storage as NLO active materials. Moreover, the chemical potential, ionization potential, electron affinity, electronegativity, global hardness, softness, refractive index, dielectric constant, electric field and electric susceptibility have also been determined. The results show that there is a good electronic transfer within the doped molecules and could have potential applications as semiconductor components, photovoltaic and photonic devices. Finally thermodynamic properties have been also computed.

Supramolecular cocrystals of O—H...O hydrogen-bonded 18-crown-6 with isophthalic acid derivatives: Hirshfeld surface analysis and third-order nonlinear optical properties

Two cocrystals of 18-crown-6 with isophthalic acid derivatives, 5-hydroxyisophthalic acid and trimesic acid, have been successfully grown by the slow evaporation solution growth technique. Crystal structures of (18-crown-6)·6(5-hydroxyisophthalic acid)·10(H2O) (I) and (18-crown-6)·2(trimesic acid)·2(H2O) (II) elucidated by single crystal X-ray diffraction reveal that both cocrystals pack the centrosymmetric triclinic space group P{\overline 1}. The molecules are associated by strong/weak hydrogen bonds, π...π and H...H stacking interactions. Powder X-ray diffraction analyses, experimental and simulated from single-crystal diffractogram data have been matched. The vibrational patterns in FT–IR spectra are used to identify the functional groups. The band gap energy is estimated by the application of the Kubelka–Munk algorithm. Hirshfeld surfaces derived from X-ray diffraction analysis reveal the type of molecular interactions and their relative contributions. The constructed supramolecular assembly of crown ether cocrystal is thoroughly described. Both cocrystals exhibit a significant third-order nonlinear optical response and it is observed that (I) possesses a significant first-order molecular hyperpolarizability whereas it is negligible for (II).

Nonlinear Optical Study in a Set of Dibenzylideneacetone Derivatives with Potential for Optical Frequency Conversion

The search for advanced optical materials, in particular, materials with nonlinear optical responses, has, in the last years, experienced substantial growth due to their vast applications in the photonics field. One of those applications is ultra-fast optical frequency conversion, in the optics communications field. Organic compounds have emerged as promising candidates for raw materials to develop nonlinear optical devices, such as optical converters, due to their intrinsic ultra-fast electronic responses. Also, the easy tailoring of organic molecular structures makes organic materials much more appealing than the inorganic ones. In this work, we have performed a linear and nonlinear optical characterization of a set of dibenzylideneacetone derivatives. The nonlinear optical responses investigated correspond to second- and third-order nonlinear processes, namely, first electronic molecular hyperpolarizability and two-photon absorption cross-section, respectively. The value of the first electronic molecular hyperpolarizability, up to 52 cm4·statvolt−1, could be considered a robust value when compared to the short-sized π-electron backbone length of the studied compounds. Such results suggest that these compounds exhibit the potential to be used as optical frequency converters. Quantum chemical calculations were used to predict the theoretical value of the first molecular hyperpolarizability, as well as to simulate the one- and two-photon absorption spectra for all compounds.

Density Functional Theory (DFT) Study on α,α-Bis(2-benzothiophen-1-yl)-4H-cyclopenta[2,1-b,3;4-b′]dithiophene Derivatives for Optoelectronic Devices

Bis(2-benzothiophen-1-yl)-4H-cyclopenta[2,1-b,3;4-b′]dithiophene derivatives comprised of three series; bis(2-thienyl)-4H-cyclopenta[2,1-b,3;4-b]dithiopene (BTDT), diphenyl4Hcyclopenta[2,1-b,3;4-b]dithiophene (DPDT) and bis(2-benzothiophen-1-yl)-4Hcyclopenta[2,1-b,3;4-b]dithiophene (BBDT) have been studied using Density Functional Theory (B3LYP/6-31G**). In each series, molecules with C=S bridge exhibited the lowest band gap; for instance in BBDT series, the energy band gap could be arranged as 2.29, 2.23 and 1.66 eV for CH2, C=O and C=S bridge respectively. The low band gaps calculated for BBDT-C=S (1.66 eV) and BTDT-C=S (1.82 eV) could facilitate photo-excited electron transfer as one the criteria for a molecule to be used in photovoltaic devices. Also, the results showed that longest UV-vis absorption wavelength was observed for molecules with C=S bridge, i.e. 1013.66, 874.75 and 1097.66 nm for BTDT, DPDT and BBDT respectively. The polarizability (α0) valves calculated for the molecules follow as -CH2 < C=O < C=S bridge in each series, indicating that the higher the polarizability (α0) valve the longer the λmax nm and the lower the energy band gap. The magnitude of the molecular hyperpolarizability β0 showed that molecular structures with -C=O bridge could be best NLO material in each series.

Accordion-like collagen fibrils suggested by P-SHG image modeling : implication in liver fibrosis

ABSTRACTSecond-order non-linear optical anisotropy parameter ρ = χ33 / χ31 is calculated for collagen-richt issues considering both a single dominant molecular hyperpolarizability tensor element β333 = β at single helix level and a priori known submicrometric triple helical organization of collagen molecules. Modeling is further improved by taking account of Poisson photonic shot noise of the detection system and simple supra-molecular fibrillar arrangements in order to accurately simulate the dispersion of ρ values in collagen-rich tissues such as tendon, skin and liver vessels. From combined P-SHG experiments and modeling, we next correlate experimental and theoretical statistical distributions of ρ. Our results highlight that the dispersion of experimental ρ values is mainly due to (i) Poisson photonic shot noise in tendon and skin, which proves to have a preponderant effect in P-SHG experiments (ii) variance of supercoil angles of accordion-like fibrils in vessels that is further reduced during the development of liver fibrosis therefore contributing to the rigidity of the tissue. These results open new avenue for future modeling correlating the dispersion of ρ values in P-SHG experiments and the fibrillar architecture as well as the mechanical stiffness of patho-physiological extracellular matrices in collagen tissues.

On the molecular optical nonlinearity of halogen-bond-forming azobenzenes

We study hyper-Rayleigh scattering and computed molecular hyperpolarizability in a series of azobenzene chromophores in chloroform and dimethylformamide as solvents.