A Comparative Study on a Novel Fibula Malleolus Cap to Increase the Accuracy of Oncologic Jaw Reconstruction

ObjectivesAlthough computer-assisted surgery using fibula flap has been widely applied for oncologic jaw reconstruction in recent years, the inaccurate positioning of the fibula harvest guide brings sliding and rotational errors, which leads to compromised accuracy in simultaneous implant placement and dental rehabilitation. This study aimed to develop a novel three-dimensional (3D)-printed patient-specific fibula malleolus cap to increase oncologic reconstruction accuracy.MethodsIn this prospective comparative study with a recent historical control cohort, patients in need of oncologic jaw reconstruction with fibula free flaps were recruited. In the study group, the fibula was harvested with the guide of the malleolus cap, whereas in the control group, without the malleolus cap. Deviations of location and angulation of distal fibula osteotomies, jaw reconstruction segments, and simultaneous dental implants were compared.ResultsTwenty patients were recruited, with 10 in each arm. The application of the malleolus cap significantly reduced the deviations in locations and angles of distal fibula osteotomies, from 9.5 to 4.1 mm and 25.3° to 8.7°. For the simultaneous dental implants placed in the fibula flaps, there was a significant increase in the accuracy of implant platform locations (the average deviation from 3.2 to 1.3 mm), apex locations (from 3.8 to 1.5 mm), and angles (from 11.3° to 4.6°). No significant difference was detected in the accuracy of fibula reconstruction segments.ConclusionsWe developed a novel fibula malleolus cap to overcome the sliding and rotational errors during fibula flap harvesting for oncologic jaw reconstruction, with increased accuracy in simultaneous dental implants. This is a step forward to achieve a satisfactory functional outcome of jaw reconstruction with dental rehabilitation.

Lower jaw reconstruction using a vascularized bone graft is the main stage of complex rehabilitation of a child with lower jaw osteoblastoclastoma

BACKGROUND: Jaw bone benign tumors and dysplasia in childhood often have an aggressive growth pattern, which requires early radical operations. Uneven growth and changing morphological characteristics of the childs dentofacial apparatus imply stage-by-stage bone and plastic surgery in the maxillofacial region. CLINICAL CASE: The paper presents a clinical observation of the medical rehabilitation of a patient from 5 to 24 years old with lower jaw osteoblastoclastoma following our proposed algorithm. DISCUSSION: The presented clinical observation demonstrates all the main stages of medical rehabilitation of a child with a benign lower jaw neoplasm. Along with timely and fully operative neoplasm removal, rational dental prosthetics, and dispensary observation with X-ray diagnostics play an important role in the childs growth period. All these measures were important to prevent a possible neoplasm recurrence, partially maintain the masticatory function for the growth period, and avoid secondary postoperative dental apparatus deformities. The age of repeated surgery to replace the titanium structure with autosteal tissue depends on the individual characteristics of patients. The operation can be performed, in some cases, starting from age 1617 years. CONCLUSIONS: Successful treatment of children with benign neoplasms of the lower jaw after post-resection defects is a complex multi-stage process of medical rehabilitation, of which the completion, most often, passes into the adult period.

Computed Tomography Angiography (CTA) before Reconstructive Jaw Surgery Using Fibula Free Flap: Retrospective Analysis of Vascular Architecture

Computed tomography angiography (CTA) is widely used in preoperative evaluation of the lower limbs’ vascular system for virtual surgical planning (VSP) of fibula free flap (FFF) for jaw reconstruction. The present retrospective clinical study analysed n = 72 computed tomography angiographies (CTA) of lower limbs for virtual surgical planning (VSP) for jaw reconstruction. The purpose of the investigation was to evaluate the morphology of the fibular bone and its vascular supply in CTA imaging, and further, the amount and distribution of periosteal branches (PB) and septo-cutaneous perforators (SCPs) of the fibular artery. A total of 144 lower limbs was assessed (mean age: 58.5 ± 15.3 years; 28 females, 38.9%; 44 males, 61.1%). The vascular system was categorized as regular (type I-A to II-C) in 140 cases (97.2%) regarding the classification by Kim. Absent anterior tibial artery (type III-A, n = 2) and posterior tibial artery (type III-B, n = 2) were detected in the left leg. Stenoses were observed mostly in the fibular artery (n = 11), once in the anterior tibial artery, and twice in the posterior tibial artery. In total, n = 361 periosteal branches (PBs) and n = 231 septo-cutaneous perforators (SCPs) were recorded. While a distribution pattern for PBs was separated into two clusters, a more tripartite distribution pattern for SCPs was found. We conclude that conventional CTA for VSP of free fibula flap (FFF) is capable of imaging and distinguishing SCPs and PBs.

The Learning Curve of Computer-Assisted Free Flap Jaw Reconstruction Surgery Using 3D-Printed Patient-Specific Plates: A Cumulative Sum Analysis

BackgroundComputer-assisted jaw reconstruction (CAJR) has benefits in reducing operation time and improving reconstruction accuracy, compared to conventional freehand jaw reconstruction. However, no information is available regarding learning curves in CAJR with the use of 3D-printed patient-specific surgical plates (PSSP). The purpose of this study was to assess surgical outcomes and learning curve for the first 58 consecutive CAJR using 3D-printed PSSP performed by a single surgical team in a single institution.MethodsIn a prospective study, consecutive patients who underwent free flap CAJR using 3D-printed PSSP were included. The determination of proficiency, based on the cumulative sum of surgical success (no major adjustment of 3D-printed PSSP, flap survival) passing the acceptable boundary line of cumulative sum analysis, was the primary outcome. To find out any potential factors influencing the learning curve, baseline characteristics of patients were compared before and after proficiency achievement. Secondary outcomes included inflexion points of the total operation time, blood loss, length of hospital stay, and bone graft deviation, measured by the cumulative sum analysis.ResultsFrom December 2016 to November 2020, 58 consecutive cases underwent surgery performed by a single surgical team. The overall surgical success rate was 94.8% (55/58). A three-stage learning curve of primary outcome was observed. The proficiency was achieved after 23 cases. The proportions of advanced tumor staging and concomitant surgery after obtaining proficiency were significantly higher than those before achieving proficiency (p = 0.046 and p < 0.001, respectively). Mean values of operation time, intraoperative blood loss, length of hospital stay, and bone graft deviation were 532.5 ± 119.2 min, 1,006.8 ± 547.2 ml, 16.1 ± 6.3 days, and 0.9 ± 1.2 mm, respectively. Two trends of learning curve were observed in the CUSUM analyses of total operation time, length of hospital stay, and bone graft deviation, in which the first and second inflexion points occurred between 8 and 17 cases and between 43 and 46 cases, respectively.ConclusionOur results revealed a three-stage learning curve of CAJR with the use of PSSP, including initial learning, plateau, and overlearning. Based on CUSUM analysis, the surgical proficiency was achieved after 23 cases, and total operation time, length of hospital stay, and bone graft deviation stabilized after 8–17 cases.

Risk Factors of Avulsion Fracture after Iliac Crestal Flap for Jaw Reconstruction

The iliac crestal flap is often used in maxillofacial reconstruction surgery because it has a similar bone contour to jaw bone. However, complications occur frequently in this flap, and the avulsion fracture of the anterior superior iliac spine (ASIS) occurs only in rare cases. The purpose of this study is to evaluate the risk factors affecting fractures that may occur after iliac crestal flap harvesting. In this study, we performed preoperative and postoperative CT scans of the iliac bones of 22 patients who underwent iliac crestal flaps between February 2013 and July 2019. Three of these patients had fractures within 1 month after surgery. After converting DICOM files to a three-dimensional model using Mimics software, some reference points were defined for analysis. The patients were classified into fracture and non-fracture groups. The patients’ age and sex, harvested bone, residual bone and absolute bed rest (ABR) periods were investigated. The patients’ age and sex were not associated with fracture occurrence. There was a statistically significant difference in the width of the anterior–superior part of residual bone. The fracture group showed statistically significantly shorter ABR periods. In the case of the iliac crestal flap, it was found that the factors that can affect the occurrence of fractures are the width of the residual bone and the ABR period. Iliac avulsion fracture can be prevented when the remaining bone is sufficient and the ABR period is prolonged sufficiently.

Jaw in a Day: Immediate Dental Rehabilitation during Fibula Reconstruction of the Mandible

Reconstructing mandibular defects presents challenges to dental rehabilitation related to altered bone and soft tissue anatomy. Dental implants are the most reliable method to restore the lost dentition. Immediate dental implants have been placed for many years but with unacceptably low rates of dental/prosthetic success. Current virtual technology allows placement of both fibulas and guided implants in restoratively driven positions that also allow immediate dental rehabilitation. Inexpensive three-dimensional printing platforms can create provisional dental prostheses placed at the time of surgery. This article reviews our digital and surgical workflow to create an immediate dental prosthesis to predictably restore the dentition during major jaw reconstruction with fibula free flaps.

Impact of Planning Method (Conventional versus Virtual) on Time to Therapy Initiation and Resection Margins: A Retrospective Analysis of 104 Immediate Jaw Reconstructions

Virtual surgical planning (VSP) and patient-specific implants are currently increasing for immediate jaw reconstruction after ablative oncologic surgery. This technique contributes to more accurate and efficient preoperative planning and shorter operation time. The present retrospective, single-center study analyzes the influence of time delay caused by VSP vs. conventional (non-VSP) reconstruction planning on the soft and hard tissue resection margins for necessary oncologic safety. A total number of 104 cases of immediate jaw reconstruction with free fibula flap are included in the present study. The selected method of reconstruction (conventionally, non-VSP: n = 63; digitally, VSP: n = 41) are analyzed in detail. The study reveals a statistically significant (p = 0.008) prolonged time to therapy initiation with a median of 42 days when the VSP method compared with non-VSP (31.0 days) is used. VSP did not significantly affect bony or soft tissue resection margin status. Apart from this observation, no significant differences concerning local tumor recurrence, lymph node, and distant metastases rates are found according to the reconstruction method, and affect soft or bone tissue resection margins. Thus, we conclude that VSP for immediate jaw reconstruction is safe for oncological purposes.