Machining Distortion Minimization of Monolithic Aircraft Parts Based on the Energy Principle

Machining distortion is a recurring problem in the machining of monolithic aircraft parts. This paper aims to study the machining distortion minimization of monolithic aircraft parts. Firstly, the energy principle of machining distortion was analyzed. Then, a rapid prediction model of the final part distortion for beam parts was proposed based on the equivalent stress, and the initial bending strain energy contained in the final part was used to characterize the bending distortion risk of the final part. Numerical simulation and milling experiments verified the effectiveness of the proposed prediction model. The relative error between the experimental and calculated results does not exceed 26.5%. Finally, the influence of initial residual stress fluctuation, part geometry and the part location on part distortion was analyzed from the energy point of view. The obtained results indicated that the expected final part distortion can be minimized by adjusting these three factors.

Machining Stresses and Initial Geometry on Bulk Residual Stresses Characterization by On-Machine Layer Removal

Prediction and control of machining distortion is a primary concern when manufacturing monolithic components due to the high scrap and rework costs involved. Bulk residual stresses, which vary from blank to blank, are a major factor of machining distortion. Thus, a bulk stress characterization is essential to reduce manufacturing costs linked to machining distortion. This paper proposes a method for bulk stress characterization on aluminium machining blanks, suitable for industrial application given its low requirements on equipment, labour expertise, and computation time. The method couples the effects of bulk residual stresses, machining stresses resulting from cutting loads on the surface and raw geometry of the blanks, and presents no size limitations. Experimental results confirm the capability of the proposed method to measure bulk residual stresses effectively and its practicality for industrial implementation.