Picoliter liquid handling at gas/liquid interface by surface and geometry control in a micro-nanofluidic device

In micro- and nanofluidic devices, highly precise fluidic control is essential. Conventional mechanical valves in microchannels and nanochannels have size limitations, whereas hydrophobic (Laplace) valves are generally difficult to use for low-surface-tension liquids. In the present study, we developed a method for handling picoliter volumes of low-surface-tension liquids in a micro-nanofluidic device. The proposed Laplace valve is based on the pinning effect. A fused silica micro-nanofluidic device that includes a picoliter chamber whose geometry was designed to induce capillary pinning was designed and fabricated. The measured Laplace pressure of a lysis buffer (surfactant) was consistent with the calculated pressure, indicating successful fabrication and hydrophobic surface modification. The working principle of the Laplace valve was verified. The Laplace valve maintained the lysis buffer at the gas/liquid interface for 60 min, which is sufficiently long for cell lysis operations. Finally, replacement of liquids in the picoliter chamber using the valve was demonstrated. The proposed method will contribute to basic technologies for fluidic control in micro- and nanofluidic devices, and the proposed Laplace valve can be used for low-surface-tension liquids. In addition, the developed valve and picoliter chamber can be utilized for the interface in single-cell lysis, which will facilitate the development of single-cell analysis devices.

2-photon-fabricated nano-fluidic traps for extended detection of single macromolecules and colloids in solution

The analysis of nanoscopic species, such as proteins and colloidal assemblies, at the single-molecule level has become vital in many areas of fundamental and applied research. Approaches to increase the detection timescales for single molecules in solution without immobilising them onto a substrate surface and applying external fields are much sought after. Here we present an easy-to-implement and versatile nanofluidics-based approach that enables increased observational-timescale analysis of single biomacromolecules and nanoscale colloids in solution. We use two-photon-based hybrid lithography in conjunction with soft lithography to fabricate nanofluidic devices with nano-trapping geometries down to 100 nm in height. We provide a rigorous description and characterisation of the fabrication route that enables the writing of nanoscopic 3D structures directly in photoresist and allows for the integration of nano-trapping and nano-channel geometries within micro-channel devices. Using confocal fluorescence burst detection, we validated the functionality of particle confinement in our nano-trap geometries through measurement of particle residence times. All species under study, including nanoscale colloids, α-synuclein oligomers, and double-stranded DNA, showed a three to five-fold increase in average residence time in the detection volume of nano-traps, due to the additional local steric confinement, in comparison to free space diffusion in a nearby micro-channel. Our approach thus opens-up the possibility for single-molecule studies at prolonged observational timescales to analyse and detect nanoparticles and protein assemblies in solution without the need for surface immobilisation.

A review on slip boundary conditions at the nanoscale: recent development and applications

The slip boundary condition for nanoflows is a key component of nanohydrodynamics theory, and can play a significant role in the design and fabrication of nanofluidic devices. In this review, focused on the slip boundary conditions for nanoconfined liquid flows, we firstly summarize some basic concepts about slip length including its definition and categories. Then, the effects of different interfacial properties on slip length are analyzed. On strong hydrophilic surfaces, a negative slip length exists and varies with the external driving force. In addition, depending on whether there is a true slip length, the amplitude of surface roughness has different influences on the effective slip length. The composition of surface textures, including isotropic and anisotropic textures, can also affect the effective slip length. Finally, potential applications of nanofluidics with a tunable slip length are discussed and future directions related to slip boundary conditions for nanoscale flow systems are addressed.

Editorial for the Special Issue on Micro/Nanofluidic Devices for Single Cell Analysis, Volume II

The functional, genetic, or compositional heterogeneity of healthy and diseased tissues promotes significant challenges to drug discovery and development [...]

Entropy generation in thermally radiated hybrid nanofluid through an electroosmotic pump with ohmic heating: Case of synthetic cilia regulated stream

Synthetic cilia-regulated transports through micro and nanofluidic devices guarantee an efficient delivery of drugs and other biological substances. Entropy analysis of cilia stimulated transport of thermally radiated hybrid nanofluid through an electroosmotic pump is conducted in this study. Joint effects of applied Lorentz force and Ohmic heating on the intended stream are also studied. Metachronal arrangements of cilia field coating channel inner side, are liable to generate current in the fluid. After using the lubrication and the Debye-Huckel estimations, numerical solutions of the envisioned problem are obtained. For pressure rise per metachronal wavelength, the pressure gradient is numerically integrated. The analysis reveals that high electric potential results in reducing the heat transfer effects in the flow system. The enhancement of flow is noticed near the channel surface for higher electroosmotic parameters. The irreversibility in the channel decreases when the Helmholtz-Smoluchowski velocity is applied in the opposite direction of the flow and thus produces the fluid friction irreversibility.

Fabrication of Ultranarrow Nanochannels with Ultrasmall Nanocomponents in Glass Substrates

Nanofluidics is supposed to take advantage of a variety of new physical phenomena and unusual effects at nanoscales typically below 100 nm. However, the current chip-based nanofluidic applications are mostly based on the use of nanochannels with linewidths above 100 nm, due to the restricted ability of the efficient fabrication of nanochannels with narrow linewidths in glass substrates. In this study, we established the fabrication of nanofluidic structures in glass substrates with narrow linewidths of several tens of nanometers by optimizing a nanofabrication process composed of electron-beam lithography and plasma dry etching. Using the optimized process, we achieved the efficient fabrication of fine glass nanochannels with sub-40 nm linewidths, uniform lateral features, and smooth morphologies, in an accurate and precise way. Furthermore, the use of the process allowed the integration of similar or dissimilar material-based ultrasmall nanocomponents in the ultranarrow nanochannels, including arrays of pockets with volumes as less as 42 zeptoliters (zL, 10−21 L) and well-defined gold nanogaps as narrow as 19 nm. We believe that the established nanofabrication process will be very useful for expanding fundamental research and in further improving the applications of nanofluidic devices.