scholarly journals Fabrication of Ultranarrow Nanochannels with Ultrasmall Nanocomponents in Glass Substrates

Micromachines ◽  
2021 ◽  
Vol 12 (7) ◽  
pp. 775
Author(s):  
Hiroki Kamai ◽  
Yan Xu

Nanofluidics is supposed to take advantage of a variety of new physical phenomena and unusual effects at nanoscales typically below 100 nm. However, the current chip-based nanofluidic applications are mostly based on the use of nanochannels with linewidths above 100 nm, due to the restricted ability of the efficient fabrication of nanochannels with narrow linewidths in glass substrates. In this study, we established the fabrication of nanofluidic structures in glass substrates with narrow linewidths of several tens of nanometers by optimizing a nanofabrication process composed of electron-beam lithography and plasma dry etching. Using the optimized process, we achieved the efficient fabrication of fine glass nanochannels with sub-40 nm linewidths, uniform lateral features, and smooth morphologies, in an accurate and precise way. Furthermore, the use of the process allowed the integration of similar or dissimilar material-based ultrasmall nanocomponents in the ultranarrow nanochannels, including arrays of pockets with volumes as less as 42 zeptoliters (zL, 10−21 L) and well-defined gold nanogaps as narrow as 19 nm. We believe that the established nanofabrication process will be very useful for expanding fundamental research and in further improving the applications of nanofluidic devices.

2015 ◽  
Vol 1 (1) ◽  
pp. 13-19 ◽  
Author(s):  
G. Grenci ◽  
E. Zanchetta ◽  
A. Pozzato ◽  
G. Della Giustina ◽  
G. Brusatin ◽  
...  

1993 ◽  
Vol 21 (1-4) ◽  
pp. 479-482 ◽  
Author(s):  
W. Langheinrich ◽  
B. Spangenberg ◽  
R. Barth ◽  
H. Kurz

2010 ◽  
Vol 645-648 ◽  
pp. 841-844 ◽  
Author(s):  
Manuel Hofer ◽  
Thomas Stauden ◽  
Ivo W. Rangelow ◽  
Jörg Pezoldt

In this work nanostructures based on a 30 nm thick 3C-SiC (100) heteroepitaxially grown on Si(100) are demonstrated. They consist of free standing nanoresonators with dimensions below 50 nm. The free standing nanostructures and resonators were defined by electron beam lithography using hydrogen silsesquioxane (HSQ) as a negative tone e-beam resist acting as a selective etching mask during the anisotropic and isotropic dry etching. The influences of the proximity effect, the crystallographic orientation, the angle of exposing on the feature size are highlighted.


Sign in / Sign up

Export Citation Format

Share Document