Adaptive Vibrarthographic Signal Denoising via Ant Colony Optimization Using Dynamic Denoising Filter Parameters

This study proposes an ant colony optimization (ACO) denoising method with dynamic filter parameters. The proposed method is developed based on ensemble empirical mode decomposition (EEMD), and aims to improve the quality of vibrarthographic (VAG) signals. It mixes the original VAG signals with different white noise amplitudes, and adopts a hybrid technology that combines EEMD with a Savitzky-Golay (SG) filter containing the dynamic parameters optimized by ACO. The results show that the proposed method provides a higher peak signal-to-noise ratio (PSNR) and a smaller root-mean-square difference than the regular methods. The SNR improvement for the VAG signals of normal knees can reach 13 dB while maintaining the original signal structure, and the SNR improvement for the VAG signals of abnormal knees can reach 20 dB. The method proposed in this study can improve the quality of nonstationary VAG signals.

Laboratory and field studies of ice-nucleating particles from open-lot livestock facilities in Texas

In this work, an abundance of ice-nucleating particles (INPs) from livestock facilities was studied through laboratory measurements from cloud-simulation chamber experiments and field investigation in the Texas Panhandle. Surface materials from two livestock facilities, one in the Texas Panhandle and another from McGregor, Texas, were selected as dust proxies for laboratory analyses. These two samples possessed different chemical and biological properties. A combination of aerosol interaction and dynamics in the atmosphere (AIDA) measurements and offline ice spectrometry was used to assess the immersion freezing mode ice nucleation ability and efficiency of these proxy samples at temperatures above −29 ∘C. A dynamic filter processing chamber was also used to complement the freezing efficiencies of submicron and supermicron particles collected from the AIDA chamber. For the field survey, periodic ambient particle sampling took place at four commercial livestock facilities from July 2017 to July 2019. INP concentrations of collected particles were measured using an offline freezing test system, and the data were acquired for temperatures between −5 and −25 ∘C. Our AIDA laboratory results showed that the freezing spectra of two livestock dust proxies exhibited higher freezing efficiency than previously studied soil dust samples at temperatures below −25 ∘C. Despite their differences in composition, the freezing efficiencies of both proxy livestock dust samples were comparable to each other. Our dynamic filter processing chamber results showed on average approximately 50 % supermicron size dominance in the INPs of both dust proxies. Thus, our laboratory findings suggest the importance of particle size in immersion freezing for these samples and that the size might be a more important factor for immersion freezing of livestock dust than the composition. From a 3-year field survey, we measured a high concentration of ambient INPs of 1171.6 ± 691.6 L−1 (average ± standard error) at −25 ∘C for aerosol particles collected at the downwind edges of livestock facilities. An obvious seasonal variation in INP concentration, peaking in summer, was observed, with the maximum at the same temperature exceeding 10 000 L−1 on 23 July 2018. The observed high INP concentrations suggest that a livestock facility is a substantial source of INPs. The INP concentration values from our field survey showed a strong correlation with measured particulate matter mass concentration, which supports the importance of size in ice nucleation of particles from livestock facilities.

Experimental approach for assessing filter-cake removability derived from reservoir drill-in fluids

Predicting formation damage in cased-hole and open-hole completion wells is of high importance. This is especially relevant when the damage is caused by reservoir drill-in fluids hence being well-bore induced. Cake filter removal has proven to be a good approach to estimate induced damage and to evaluate drill-in fluids’ performance. We present an experimental methodology to evaluate filter cake removal, which could be achieved during the well's initial production. An improved experimental setup, to the ones presented in literature, has been developed to enhance data quality. A twofold approach was used for setup design, and first, it can be integrated with devices used to evaluate the static/dynamic filter-cake. Second, it can be used to simulate more realistic cases (field related) by adjusting the experiment parameters. Hence, to replicate the expected drawdown pressure as well as the corresponding flow rate of the studied reservoir. Three key indicators directly related to filter-cake removal were used as evaluators in this work. Lift-off pressure, internal and external filter cakes removal efficiency. Three reservoir fluid systems were studied, two polymer-based and one potassium carbonate. Results show that pressure required to initiate the collapsing process of the filter cake is not significant. Polymer-based drilling fluids showed better performance in terms of external and internal filter cake cleaning efficiency comparing to potassium carbonate. Moreover, we observed that filtrate volume has no clear relation with the degree of residual damage.

Removing Foreground Occlusions in Light Field using Micro-lens Dynamic Filter

Foreground occlusion removal task aims to automatically detect and remove foreground occlusions and recover background objects. Since for Light Fields (LFs), background objects occluded in some views may be seen in other views, the foreground occlusion removal task for LFs is easy to achieve. In this paper, we propose a learning-based method combining ‘seeking’ and ‘generating’ to recover occluded background. Specifically, the micro-lens dynamic filters are proposed to ‘seek’ occluded background points in shifted micro-lens images and remove occlusions using angular information. The shifted images are then combined to further ‘generate’ background regions to supplement more background details using spatial information. By fully exploring the angular and spatial information in LFs, the dense and complex occlusions can be easily removed. Quantitative and qualitative experimental results show that our method outperforms other state-of-the-arts methods by a large margin.

Dynamic decorrelation as a unifying principle for explaining a broad range of brightness phenomena

The visual system is highly sensitive to spatial context for encoding luminance patterns. Context sensitivity inspired the proposal of many neural mechanisms for explaining the perception of luminance (brightness). Here we propose a novel computational model for estimating the brightness of many visual illusions. We hypothesize that many aspects of brightness can be explained by a dynamic filtering process that reduces the redundancy in edge representations on the one hand, while non-redundant activity is enhanced on the other. The dynamic filter is learned for each input image and implements context sensitivity. Dynamic filtering is applied to the responses of (model) complex cells in order to build a gain control map. The gain control map then acts on simple cell responses before they are used to create a brightness map via activity propagation. Our approach is successful in predicting many challenging visual illusions, including contrast effects, assimilation, and reverse contrast with the same set of model parameters.

Hammerstein Box-Jenkins System Identification of the Cascaded Tanks Benchmark System

A common process control application is the cascaded two-tank system, where the level is controlled in the second tank. A nonlinear system identification approach is presented in this work to predict the model structure parameters that minimize the difference between the estimated and measured data, using benchmark datasets. The general suggested structure consists of a static nonlinearity in cascade with a linear dynamic filter in addition to colored noise element. A one-step ahead prediction error-based technique is proposed to estimate the model. The model is identified using a separable least squares optimization, where only the parameters that appear nonlinearly in the output of the predictor are solved using a modified Levenberg–Marquardt iterative optimization approach, while the rest are fitted using simple least squares after each iteration. Finally, MATLAB simulation examples using benchmark data are included.