Effect of styrene oxide and diethyl maleate on expression of cytochrome P450 family 1 and glutathione store in mouse liver

Purpose: To determine the effect of the glutathione (GSH) suppressors styrene oxide (SO) and diethyl maleate (DEM) on the hepatic expression of cytochrome P450 family 1 (Cyp1) isoforms that are related to carcinogenesis including Cyp1a1, Cyp1a2, and Cyp1b1. Methods: Seven-week-old ICR mice were intraperitoneally injected with SO (150 and 300 mg/kg/day), DEM (175 and 350 mg/kg/day), or N-acetylcysteine (NAC; 300 and 600 mg/kg/day) for 7, 14, or 28 days. Plasma alanine aminotransferase (ALT) and aspartate aminotransferase (AST) levels, hepatic Cyp1 expression, total glutathione, reduced glutathione (GSH), and oxidized glutathione (GSSG) were determined. Results: ALT and AST levels were markedly increased by SO and DEM while GSH/GSSG ratio was decreased by SO in all treatments (p < 0.05), while high dose (350 mg/kg/day) DEM significantly suppressed GSH/GSSG ratio at 28 days (p < 0.05). The expressions of Cyp1a1, Cyp1a2, and Cyp1b1 were induced by SO and DEM, corresponding with induction of ethoxy/methoxy-resorufin O- dealkylase activities. Conclusion: The Cyp1 family metabolizes procarcinogens to carcinogenic DNA adducts; exposure to the industrial solvents, SO and DEM, raises the risk of carcinogenesis via GSH depletion coupled with Cyp1 induction.

Ring-Opening Polymerization of ε-Caprolactone and Styrene Oxide–CO2 Coupling Reactions Catalyzed by Chelated Dehydroacetic Acid–Imine Aluminum Complexes

A series of chelated dehydroacetic acid–imine-based ligands L1H~L4H was synthesized by reacting dehydroacetic acid with 2-t-butylaniline, (S)-1-phenyl-ethylamine, 4-methoxylbenzylamine, and 2-(aminoethyl)pyridine, respectively, in moderate yields. Ligands L1H~L4H reacted with AlMe3 in toluene to afford corresponding compounds AlMe2L1 (1), AlMe2L2 (2), AlMe2L3 (3), and AlMe2L4 (4). All the ligands and aluminum compounds were characterized by IR spectra, 1H and 13C NMR spectroscopy. Additionally, the ligands L1H~L4H and corresponding aluminum derivatives 1, 3, and 4 were characterized by single-crystal X-ray diffractometry. The catalytic activities using these aluminum compounds as catalysts for the ε-caprolactone ring-opening polymerization (ROP) and styrene oxide-CO2 coupling reactions were studied. The results show that increases in the reaction temperature and selective solvent intensify the conversions of ε-caprolactone to polycaprolactone. Regarding the coupling reactions of styrene oxide and CO2, the conversion rate is over 90% for a period of 12 h at 90 °C. This strategy dispenses the origination of cyclic styrene carbonates, which is an appealing concern because of the transformation of CO2 into an inexpensive, renewable and easy excess carbon feedstock.

Pyrithione metal (Cu, Ni, Ru) complexes as photo-catalysts for styrene oxide production

Selective photochemical oxidation of styrene was performed in an active acetonitrile medium, using H2O2 with or without ultraviolet (UV) light radiation. Pyrithione metal complexes (M–Pth: M = Cu(II), Ni(II), Ru(II); Pth = 2-mercaptopyridine-N-oxide) were used as catalysts. Catalytic testing measurements were done by varying the time, chemical reaction temperature and H2O2 concentration with or without UV energy. Epoxide styrene oxide (SO), benzaldehyde and acetophenone were the major synthesized products. A high batch rate, conversion and selectivity towards SO was shown in the presence of UV. A minor constant formation of CO2 was observed in the stream. Coordinated Ru-based compounds demonstrated the highest process productivity of SO at 60 °C. The effect of the functional alkyl substituent on the ligand Pth, attached to the specific ruthenium(II) centre, decreased the activity of the substance. Ni-Pth selectively yielded benzaldehyde. The stability of the catalysts was examined by applying nuclear magnetic resonance (NMR) spectroscopy and thermogravimetric analysis coupled with mass spectrometry. Tested metal complexes with pyrithione (M–Pth) exhibited excellent reuse recyclability up to 3 cycles.

Electrogenerated BF3 From Tetrafluoroborate-Based Ionic Liquids: Theoretical And Experimental Studies Towards Selective Styrene Oxide Isomerization

The anodic oxidation of tetrafluoroborate anion yields the Lewis acid BF3. If this reaction is carried out in an imidazolium ionic liquid, a quite stable system containing BF3 is obtained, whose reactivity is similar to the one of BF3·Et2O, but less harmful. The two reagents’ stabilities were compared by computational analysis, strongly suggesting a higher stability for BF3/BMIm-BF4 system. The effect of substituents on the imidazolium ring and of the electrochemical configuration on BF3 reactivity were studied in a model reaction, styrene oxide isomerization. The experimental conditions were defined for the selective formation of phenylacetaldehyde or of 2-benzyl-4-phenyl-1,3-dioxolane. Moreover, the formation of N-heterocyclic carbene-BF3 adduct was confirmed when carrying out the electrolysis in an undivided cell. Electrogenerated BF3/BMIm-BF4 system demonstrated to be a valid alternative to commercial BF3·Et2O.

Chromium-Salophen as a Soluble or Silica-Supported Co-Catalyst for the Fixation of CO2 Onto Styrene Oxide at Low Temperatures

Addition of a soluble or a supported CrIII-salophen complex as a co-catalyst greatly enhances the catalytic activity of Bu4NBr for the formation of styrene carbonate from styrene epoxide and CO2. Their combination with a very low co-catalyst:Bu4NBr:styrene oxide molar ratio = 1:2:112 (corresponding to 0.9 mol% of CrIII co-catalyst) led to an almost complete conversion of styrene oxide after 7 h at 80°C under an initial pressure of CO2 of 11 bar and to a selectivity in styrene carbonate of 100%. The covalent heterogenization of the complex was achieved through the formation of an amide bond with a functionalized {NH2}-SBA-15 silica support. In both conditions, the use of these CrIII catalysts allowed excellent conversion of styrene already at 50°C (69 and 47% after 24 h, respectively, in homogeneous and heterogeneous conditions). Comparison with our previous work using other metal cations from the transition metals particularly highlights the preponderant effect of the nature of the metal cation as a co-catalyst in this reaction, that may be linked to its calculated binding energy to the epoxides. Both co-catalysts were successfully reused four times without any appreciable loss of performance.