Chemical Transformation of α-Pinene derived Organosulfate via Heterogeneous OH Oxidation: Implications for Sources and Environmental Fates of Atmospheric Organosulfates

Organosulfur compounds are found to be ubiquitous in atmospheric aerosols — a majority of which are expected to be organosulfates (OSs). Given the atmospheric abundance of OSs, and their potential to form a variety of reaction products upon ageing, it is imperative to study the transformation kinetics and chemistry of OSs to better elucidate their atmospheric fates and impacts. In this work, we investigated the chemical transformation of an α-pinene derived organosulfate (C10H17O5SNa, αpOS-249) through heterogeneous OH oxidation at a relative humidity of 50 % in an oxidation flow reactor (OFR). The aerosol-phase reaction products were characterized using the high-performance liquid chromatography-electrospray ionization-high resolution mass spectrometry and the ion chromatography. By monitoring the decay rates of αpOS-249, the effective heterogeneous OH reaction rate was measured to be (6.72 ± 0.55) × 10−13 cm3 molecule−1 s−1. This infers an atmospheric lifetime of about two weeks at an average OH concentration of 1.5 × 106 molecules cm–3. Product analysis shows that OH oxidation of αpOS-249 can yield more oxygenated OSs having a nominal mass-to-charge ratio (m/z) at 247 (C10H15O5S−), 263 (C10H15O6S−), 265 (C10H17O6S−), 277 (C10H13O7S−), 279 (C10H15O7S−), and 281 (C10H17O7S−). The formation of fragmentation products, including both small OSs (C < 10) and inorganic sulfates, is found to be insignificant. These observations suggest that functionalization reactions are likely the dominant processes and that multigenerational oxidation possibly leads to formation of products with one or two hydroxyl and carbonyl functional groups adding to αpOS-249. Furthermore, all product ions except m/z = 277 have been detected in laboratory generated α-pinene derived secondary organic aerosols as well as in atmospheric aerosols. Our results reveal that OSs freshly formed from the photochemical oxidation of α-pinene could react further to form OSs commonly detected in atmospheric aerosols through heterogeneous OH oxidation. Overall, this study provides more insights into the sources, transformation, and fate of atmospheric OSs.

Monte Carlo simulation of the cosmic muon charge ratio

The muonic component of air showers is sensitive to the mass and energy of the primary cosmic ray and is the most abundant component of charged particles arriving at the surface, and able to penetrate deep underground. The muon charge ratio, defined as the number of positive over negatively charged muons, is a very interesting quantity for the study of hadronic interactions at high energies and the nature of cosmic ray primaries. Furthermore, Earth's atmosphere is the development medium of cosmic air showers before they arrive at the ground. Therefore, variations in the density of the atmosphere between seasons must be studied. It is also very important to account for the zenith angular dependence of atmospheric muons, in particular for showers penetrating the atmosphere at high zenith angles. We present a study of the muon charge ratio using Monte Carlo simulations of two cosmic primaries, proton, and iron, of 100 TeV and 1 PeV energies, and with a zenith angle of 0° to 60°. The dependence on the direction of extensive air showers EAS and their radial distance appears to be very pronounced. In addition, the muon density is discussed assuming the Central European Atmosphere in June and December.

Association between race and in-hospital outcomes in children with spina bifida following inpatient urologic surgery

PURPOSE: Post-operative complication rates may vary among racial and/or ethnic groups and have not been previously described in individuals with spina bifida (SB) undergoing urologic surgery. The aim of this study was to compare in-hospital complication frequencies of individuals with SB following urologic surgery by race/ethnicity. METHODS: The Nationwide Inpatient Sample was used to identify pediatric patients with SB who underwent inpatient urologic procedures. A pediatric cohort (<18 years old) with SB that underwent urologic surgery were assessed. All analyses report weighted descriptive statistics, outcomes, and race/ethnicity was the primary predictor variable. The primary outcome of interest was post-operative complications which were defined using NSQIP ICD-9 code definitions. Secondary analysis included length of stay (LOS), and encounter cost was estimated using the cost-to-charge ratio files provided by the Healthcare Cost and Utilization Project. RESULTS: The unadjusted model showed no differences in complications, LOS, and cost. In the adjusted model there were no differences in complications, LOS, and cost between Black and White encounters. However, Hispanic ethnicity was associated with a 20%(95%CI: 4–40%) increase in LOS and 18%(95%CI: 2–35%, p = 0.02) increase in cost compared to White encounters. CONCLUSION: There was no evidence of variation for in-hospital complication rates among racial/ethnic groups undergoing urologic surgery. Hispanic ethnicity was associated with higher costs and longer LOS in pediatric SB encounters.

Delivery of pDNA to the Lung by Lipopolyplexes Using N-Lauroylsarcosine and Effect on the Pulmonary Fibrosis

In a previous study, we constructed a lung-targeting lipopolyplex containing polyethyleneimine (PEI), 1,2-di-O-octadecenyl-3-trimethylammonium propane (DOTMA), and N-lauroylsarcosine (LS). The lipopolyplex exhibited an extremely high gene expression in the lung after intravenous administration. Here, we optimized the lipopolyplex and used it to deliver a TGF-β1 shRNA to treat refractory pulmonary fibrosis. We constructed several lipopolyplexes with pDNA, various cationic polymers, cationic lipids, and LS to select the most effective formulation. Then, the pDNA encoding shRNA against mouse TGF-β1 was encapsulated in the lipopolyplex and injected into mice with bleomycin-induced pulmonary fibrosis. After optimizing the lipopolyplex, dendrigraft poly-L-lysine (DGL) and DOTMA were selected as the appropriate cationic polymer and lipid, respectively. The lipopolyplex was constructed with a pDNA, DGL, DOTMA, and LS charge ratio of 1:2:2:4 showed the highest gene expression. After intravenous administration of the lipopolyplex, the highest gene expression was observed in the lung. In the in vitro experiment, the lipopolyplex delivered pDNA into the cells via endocytosis. As a result, the lipopolyplex containing pDNA encoding TGF-β1 shRNA significantly decreased hydroxyproline in the pulmonary fibrosis model mice. We have successfully inhibited pulmonary fibrosis using a novel lung-targeting lipopolyplex.

Effect of Forced Liquid Cooling on the Voltage/Charge Displacement Characteristics of Stacked Piezoelectric Actuators during High-Frequency Drive

Piezoelectric stack actuators (PESAs) are widely used in applications requiring a fast response, high resolution, and high accuracy. The self-heating of a PESA during continuous drive with a large amplitude at high frequencies can change its voltage displacement and charge displacement characteristics. These changes can lead to a loss of stability and inaccurate PESA positioning systems. In this paper, we confirmed that by using our proposed forced liquid cooling, the changes to the dynamic characteristics and the impedance of a PESA due to the fact of self-heating could be reduced. Voltage displacement curve measurements at 10 kHz demonstrated that with natural heat dissipation, the amplitude of PESA increased by 15% due to the self-heating compared to the amplitude measured at the start of driving but only by 3% with forced liquid cooling. The displacement-to-charge ratio decreased by 12% compared to that at room temperature with natural heat dissipation, while it increased by 1% during forced liquid cooling. In the measured frequency response of the voltage displacement transfer function, the increased temperature changed the gain and phase of the first and secondary vibration modes above 20 kHz with natural heat dissipation. Forced liquid cooling also reduced the variations in the frequency response of the voltage displacement transfer function.

Interfacial Behavior of Solid- and Liquid-like Polyelectrolyte Complexes as a Function of Charge Stoichiometry

We systematically investigate in this work the surface activity of polyelectrolyte complex (PECs) suspensions as a function of the molar charge ratio Z (= [-]/[+]) from two model systems: the weakly and strongly interacting poly (diallyldimethylammonium chloride)/poly (acrylic acid sodium salt) (PDADMAC/PANa) and poly (diallyldimethylammonium chloride)/poly (sodium 4- styrenesulfonate) (PDADMAC/PSSNa) pairs, respectively. For both systems, the PEC surface tension decreases as the system approaches charge stoichiometry (Z = 1) whenever the complexation occurs in the presence of excess PDADMAC (Z < 1) or excess polyanion (Z > 1) consistent with an increased level of charge neutralization of PEs forming increasingly hydrophobic and neutral surface-active species. The behavior at stoichiometry (Z = 1) is also particularly informative about the physical nature of the complexes. The PDADMAC/PANa system undergoes a liquid–liquid phase transition through the formation of coacervate microdroplets in equilibrium with macroions remaining in solution. In the PDADMAC/PSSNa system, the surface tension of the supernatant was close to that of pure water, suggesting that the PSSNa-based complexes have completely sedimented, consistent with a complete liquid–solid phase separation of an out-of-equilibrium system. Besides, the high sensitivity of surface tension measurements, which can detect the presence of trace amounts of aggregates and other precursors in the supernatant, allows for very accurate determination of the exact charge stoichiometry of the complexes. Finally, the very low water/water interfacial tension that develops between the dilute phase and the denser coacervate phase in the PDADAMAC/PANa system was measured using the generalized Young–Laplace method to complete the full characterization of both systems. The overall study showed that simple surface tension measurements can be a very sensitive tool to characterize, discriminate, and better understand the formation mechanism of the different structures encountered during the formation of PECs.

Cancer Tissue Classification Using Supervised Machine Learning Applied to MALDI Mass Spectrometry Imaging

Matrix assisted laser desorption/ionization mass spectrometry imaging (MALDI MSI) can determine the spatial distribution of analytes such as protein distributions in a tissue section according to their mass-to-charge ratio. Here, we explored the clinical potential of machine learning (ML) applied to MALDI MSI data for cancer diagnostic classification using tissue microarrays (TMAs) on 302 colorectal (CRC) and 257 endometrial cancer (EC)) patients. ML based on deep neural networks discriminated colorectal tumour from normal tissue with an overall accuracy of 98% in balanced cross-validation (98.2% sensitivity and 98.6% specificity). Moreover, our machine learning approach predicted the presence of lymph node metastasis (LNM) for primary tumours of EC with an accuracy of 80% (90% sensitivity and 69% specificity). Our results demonstrate the capability of MALDI MSI for complementing classic histopathological examination for cancer diagnostic applications.

Distinguishing between Isobaric Ions Using Microdroplet Hydrogen–Deuterium Exchange Mass Spectrometry

Isobaric ions having the same mass-to-charge ratio cannot be separately identified by mass spectrometry (MS) alone, but this limitation can be overcome by using hydrogen–deuterium exchange (HDX) in microdroplets. Because isobaric ions may contain a varied number of exchangeable sites and different types of functional groups, each one produces a unique MS spectral pattern after droplet spray HDX without the need for MS/MS experiments or introduction of ion mobility measurements. As an example of the power of this approach, isobaric ions in urinary metabolic profiles are identified and used to distinguish between healthy individuals and those having bladder cancer.

Time-dependent source apportionment of submicron organic aerosol for a rural site in an alpine valley using a rolling positive matrix factorisation (PMF) window

We collected 1 year of aerosol chemical speciation monitor (ACSM) data in Magadino, a village located in the south of the Swiss Alpine region, one of Switzerland's most polluted areas. We analysed the mass spectra of organic aerosol (OA) by positive matrix factorisation (PMF) using Source Finder Professional (SoFi Pro) to retrieve the origins of OA. Therein, we deployed a rolling algorithm, which is closer to the measurement, to account for the temporal changes in the source profiles. As the first-ever application of rolling PMF with multilinear engine (ME-2) analysis on a yearlong dataset that was collected from a rural site, we resolved two primary OA factors (traffic-related hydrocarbon-like OA (HOA) and biomass burning OA (BBOA)), one mass-to-charge ratio (m/z) 58-related OA (58-OA) factor, a less oxidised oxygenated OA (LO-OOA) factor, and a more oxidised oxygenated OA (MO-OOA) factor. HOA showed stable contributions to the total OA through the whole year ranging from 8.1 % to 10.1 %, while the contribution of BBOA showed an apparent seasonal variation with a range of 8.3 %–27.4 % (highest during winter, lowest during summer) and a yearly average of 17.1 %. OOA (sum of LO-OOA and MO-OOA) contributed 71.6 % of the OA mass, varying from 62.5 % (in winter) to 78 % (in spring and summer). The 58-OA factor mainly contained nitrogen-related variables which appeared to be pronounced only after the filament switched. However, since the contribution of this factor was insignificant (2.1 %), we did not attempt to interpolate its potential source in this work. The uncertainties (σ) for the modelled OA factors (i.e. rotational uncertainty and statistical variability in the sources) varied from ±4 % (58-OA) to a maximum of ±40 % (LO-OOA). Considering that BBOA and LO-OOA (showing influences of biomass burning in winter) had significant contributions to the total OA mass, we suggest reducing and controlling biomass-burning-related residential heating as a mitigation strategy for better air quality and lower PM levels in this region or similar locations. In Appendix A, we conduct a head-to-head comparison between the conventional seasonal PMF analysis and the rolling mechanism. We find similar or slightly improved results in terms of mass concentrations, correlations with external tracers, and factor profiles of the constrained POA factors. The rolling results show smaller scaled residuals and enhanced correlations between OOA factors and corresponding inorganic salts compared to those of the seasonal solutions, which was most likely because the rolling PMF analysis can capture the temporal variations in the oxidation processes for OOA components. Specifically, the time-dependent factor profiles of MO-OOA and LO-OOA can well explain the temporal viabilities of two main ions for OOA factors, m/z 44 (CO2+) and m/z 43 (mostly C2H3O+). Therefore, this rolling PMF analysis provides a more realistic source apportionment (SA) solution with time-dependent OA sources. The rolling results also show good agreement with offline Aerodyne aerosol mass spectrometer (AMS) SA results from filter samples, except for in winter. The latter discrepancy is likely because the online measurement can capture the fast oxidation processes of biomass burning sources, in contrast to the 24 h filter samples. This study demonstrates the strengths of the rolling mechanism, provides a comprehensive criterion list for ACSM users to obtain reproducible SA results, and is a role model for similar analyses of such worldwide available data.

Distinguishing Between Isobaric Ions Using Microdroplet Hydrogen-Deuterium Exchange Mass Spectrometry

Isobaric ions having the same mass-to-charge ratio cannot be separately identified by mass spectrometry (MS) alone, but this limitation can be overcome using hydrogen-deuterium exchange (HDX) in microdroplets. Because isobaric ions may contain a varied number of exchangeable sites and different types of functional groups, each one produces a unique MS spectral pattern after droplet spray HDX without the need for MS/MS experiments or introduction of ion mobility measurements. As an example of the power of this approach, isobaric ions in urinary metabolic profiles are identified and used to distinguish between healthy individuals and those having bladder cancer.