Two new bis(pyridine)-bis(amide)-based copper(II) coordination compounds for the electrochemical detection of trace Cr(VI) and efficient electrocatalytic oxygen evolution

Two new metal-organic compounds (MOCs) [Cu(L)0.5(3-nba)2] (1) and [Cu(L)(2,5-tdc)] (2) have been hydrothermally synthesized by employing the ligand N,N′-di(3-pyridyl)adipoamide (L) and two carboxylic acids (3-Hnba = 3-nitrobenzoic acid, 2,5-H2tdc = 2,5-thiophenedicarboxylic acid) as ligands. Compound 1 displays a metal-organic chain-like structure formed by the {Cu2(3-nba)4} double-paddle wheel units and the µ 2-bridging L ligands. The adjacent polymeric chains form a supramolecular layered structure through hydrogen bonding. Compound 2 shows a 3D metal-organic polymeric framework derived from Cu-L layers and µ 2-bridging 2,5-tdc ligands, which presents a 3,5-connected {4.62}{4.66.83} topology. The electrochemical and electrocatalytic behavior of the two compounds has been studied in detail. Carbon paste working electrodes modified with compounds 1 and 2 can be used as highly selective sensors for detecting traces Cr(VI). Both electrodes show also electrocatalytic performance in oxygen evolution reactions (OERs).

The solubilities of benzoic acid and its nitro-derivatives, 3-nitro and 3,5-dinitrobenzoic acids

The solubilities of benzoic acid and its nitrated derivatives (3-nitrobenzoic acid and 3,5-dinitrobenzoic acid) in seven pure solvents—water, methanol, ethanol, acetonitrile, dichloromethane, toluene, and ethyl acetate—were determined experimentally over a temperature range from 273.15 K to 323.15 K under 101.3 kPa. The solubility of the above substances in these solvents increased with temperature. The solubility values of benzoic acid in these seven solvents follow the following order: ethanol > ethanol > acetonitrile > ethyl acetate > dichloromethane > toluene > water, while the solubility values of its nitrification derivatives in these seven solvents follow the following order: methanol > ethanol > ethyl acetate > acetonitrile > dichloromethane > toluene > water. The solubility of benzoic acid, 3-nitrobenzoic acid, and 3,5-dinitrobenzoic acid were significantly different in the same solvent. The solubilities obtained are very helpful in improving the recrystallization and yields of 3-nitrobenzoic acid and 3,5-dinitrobenzoic acid.

A simple paper-based biosensor for on-site visual detection of organophosphate residues

In general, the laboratory method of analyzing pesticides in vegetables is complicated due to the high cost of equipment and chemicals. The process of analyzing pesticide residues generally requires expertise as well as a significant period of time. In this study, a paper-based biosensor was developed for the detection of acetylcholinesterase (AChE) inhibitors, particularly organophosphate pesticides. The paperbased biosensor was constructed based on the Ellman colorimetric assay by immobilizing AChE on cellulose paper with 2% alginate gel, 0.25% glutaraldehyde and the colorimetric reagent 5,5-dithio-bis-(2-nitrobenzoic acid) (DTNB) in phosphate buffer (pH 8.0). As a substrate, acetylthiocholine chloride (ATChCl) was used. The results showed that the developed paperbased biosensor has been stable for 2 weeks with a detection limit of 0.03 mM of chlorpyrifos. The paper-based biosensor was applied to detect organophosphate pesticides in vegetables from the farmers’ market, Ratchaburi Province. It was found that the test results of the paper-based biosensor were similar to the commercial GT-test kit. The paper-based biosensor was 10 times faster than the GT-test kit in terms of testing time and the results were easy to identify due to the color-based indicator. As a result, a paper-based biosensor is rapid, portable and easy to use by the general population.

Preparation and Application of a Hydrochar-Based Palladium Nanocatalyst for the Reduction of Nitroarenes

In the present study, a novel heterogeneous catalyst was successfully fabricated through the decoration of palladium nanoparticles on the surface of designed Fe3O4-coffee waste composite (Pd-Fe3O4-CWH) for the catalytic reduction of nitroarenes. Various characterization techniques such as XRD, FE-SEM and EDS were used to establish its nano-sized chemical structure. It was determined that Pd-Fe3O4-CWH is a useful nanocatalyst, which can efficiently reduce various nitroarenes, including 4-nitrobenzoic acid (4-NBA), 4-nitroaniline (4-NA), 4-nitro-o-phenylenediamine (4-NPD), 2-nitroaniline (2-NA) and 3-nitroanisole (3-NAS), using NaBH4 in aqueous media and ambient conditions. Catalytic reactions were monitored with the help of high-performance liquid chromatography. Additionally, Pd-Fe3O4-CWH was proved to be a reusable catalyst by maintaining its catalytic activity through six successive runs. Moreover, the nanocatalyst displayed a superior catalytic performance compared to other catalysts by providing a shorter reaction time to complete the reduction in nitroarenes.

A Rational Analysis on Key Parameters Ruling Zerovalent Iron-Based Treatment Trains: Towards the Separation of Reductive from Oxidative Phases

The development of treatment trains for pollutant degradation employing zerovalent iron has been attracting a lot of interest in the last few years. This approach consists of pre-treatment only with zerovalent iron, followed by a Fenton oxidation taking advantage of the iron ions released in the first step. In this work, the advantages/disadvantages of this strategy were studied employing commercial zerovalent iron microparticles (mZVI). The effect of the initial amount of mZVI, H2O2, pH, conductivity, anions and dissolved oxygen were analysed using p-nitrobenzoic acid (PNBA) as model pollutant. 83% reduction of PNBA 6 µM into p-aminobenzoic acid (PABA) was achieved in natural water at an initial pH 3.0 and 1.4 g/L of mZVI, under aerobic conditions, in 2 h. An evaluation of the convenience of removing mZVI after the reductive phase before the Fenton oxidation was investigated together with mZVI reusability. The Fenton step against the more reactive PABA required 50 mg/L of H2O2 to achieve more than 96% removal in 15 min at pH 7.5 (final pH from the reductive step). At least one complete reuse cycle (reduction/oxidation) was achieved with the separated mZVI. This approach might be interesting to treat wastewater containing pollutants initially resistant to hydroxyl radicals.