Investigation of the parameters of the process of obtaining low-sulfur coke from heavy oil residues in the presence of a recycling agent

The current state of the oil refining industry is characterized by obtaining high-quality products that meet environmental requirements. An important issue is the deep processing of oil, as well as the use of oil waste as raw materials. In this regard, there is an interest in putting oil raw materials into operation through destructive processes: catalytic cracking, thermal cracking, visbreaking, coking, and processing of most of the oil waste. The article shows the possibility of producing coke with a low sulfur content from heavy oil waste from a domestic oil field. The physical and chemical properties of the extracted distillates are determined by chromatographic analysis and determined that the group-hydrocarbon composition corresponds to the composition of fractions obtained from primary atmospheric distillation. The process of obtaining of low-sulfur coke used as a conductor and oxidizer of electric current and raw materials in the production of structural material in the presence of a recycling agent from heavy oil waste from the Kumkol field was studied.

Understanding Informal Actors Of Plastic Waste Recycling In Semarang City

ABSTRAKKegiatan daur ulang sampah di Kota Semarang dapat dilakukan dengan cukup baik berkat campur tangan dari sektor informal. Sayangnya, kegiatan pengelolaan sampah formal tidak mempertimbangkan nilai pemulihan sampah. Penelitian ini bertujuan untuk mengidentifikasi aliran sampah plastik di sektor informal di Kota Semarang. Peneliti menggunakan wawancara mendalam untuk mengumpulkan data. Ada 46 agen daur ulang, termasuk lima (5) pemulung, 17 pengepul 20 perusahaan skala kecil, tiga (3) perusahaan skala besar, dan 1 perantara (pabrik penggilingan plastik) yang telah diwawancarai. Data dari Badan Lingkungan Hidup Kota Semarang digunakan sebagai data sekunder. Hasil penelitian menunjukkan bahwa jumlah sampah plastik yang dihasilkan oleh masing-masing agen daur ulang diperkirakan 23,98 kg/ hari di tingkat pemulung, 54,74 kg/ hari di tingkat pengepul, 347,48 kg / hari di tingkat perusahaan skala kecil, 1.735,3 kg / hari di tingkat perusahaan skala besar, dan 2.160 kg / hari di tingkat perantara. Produsen bijih plastik daur ulang berlokasi di luar Kota Semarang, sedangkan bank sampah berbasis masyarakat adalah bagian dari pengelolaan sampah berbasis masyarakat yang tidak mencari keuntungan. Oleh karena itu, tidak dibahas secara mendalam di penelitian ini.Kata kunci: sampah plastik, aliran sampah, agen daur ulangABSTRACTWaste recycling activities in Semarang City can be conducted quite well due to the interference of the informal sector. Unfortunately, the formal waste management activities do not consider the utilization of waste recovery value. This study aims to identify the flow of plastic waste in the informal sector in Semarang City. We used in-depth interviews to collect data. There are 46 recycling agents, including five (5) scavengers, 17 scrap dealers, 20 small scale enterprises, three (3) large scale enterprises, and 1 intermediate (plastic grinding mill) that has been interviewed. Data from The Environment Agency of Semarang City obtained as secondary data. The results showed that the amount of plastic waste generated by each recycling agent was estimated at 23.98 kg/day at the scavenger level, 54.74 kg/day at the scrap dealer level, 347.48 kg/day at the small scale enterprise level, 1,735.3 kg / day days at large scale enterprise level, and 2,160 kg/day at the level of plastic waste intermediates. Recycled plastic ore producers are located outside Semarang City, whereas the community-based waste bank is part of community based solid waste management that is not looking for profit. Hence, it is not discussed in depth in this study.Keywords: plastic waste, waste flow, recycling agent

Cold Recycled Asphalt Mixture using 100% RAP with Emulsified Asphalt-Recycling Agent as a New Pavement Base Course

The rehabilitation process of asphalt pavements using the technique of milling and filling can cause several environmental problems due to either the disposal of the milled asphalt mix or the exploration of natural resources. One alternative to mitigate these impacts is to reuse this milled material, known as reclaimed asphalt pavement (RAP), in the construction of new pavement layers. Within the several available techniques to reuse the RAP, cold recycling using an emulsified asphalt-recycling agent has shown great potential. The aim of this study is to evaluate the application of a cold recycled asphalt mix using 100% RAP with an emulsified asphalt-recycling agent as a new pavement base course. A trial section was built employing this material as a pavement base course in a heavy traffic highway in Brazil, and its structural behavior was monitored for 12 months using a Falling Weight Deflectometer (FWD) to assess its performance over time. Furthermore, a laboratory-testing program was performed to evaluate the recycled mixture stiffness and strength through resilient modulus and indirect tensile strength tests. These tests were used to investigate the influence of the storage interval (7, 14, and 28 days) considering the time between mixing and compaction of the mixture. The effect of the curing time after compaction (1, 3, 7, 26, and 56 days) was also assessed. It was verified in laboratory and in the trial section that the stiffness increases with curing time. Furthermore, the backcalculated elastic resilient moduli indicated values in the same order of magnitude to those obtained in the laboratory tests. In addition to the laboratory test findings, it was also observed that the longer the period of storage, the higher the values of stiffness and tensile strength for short periods of curing. This behavior was not verified when longer curing periods were used. In general, the use of cold recycled asphalt mixtures as base course of new pavements proved to be a promising alternative to reuse RAP.