Directivity and Bandwidth Enhancement of Patch Antenna using Metamaterial

This manuscript is the outcome of detailed research. A novel metamaterial structure is proposed in this paper to improve the directivity of the antenna. In this research paper a method of implementing metamaterial over the patch is used to enhance the directivity of rectangular microstrip patch antenna. From the results proposed expectation has been achieved, it is noted that in the presence of the LHM, the antenna is more directive and has a higher gain. This proposed patch is designed at the frequency of 2.75 GHz. The proposed structure is a combination of circular rings by virtue of its backward wave propagation property and negative reflection it improve the parameters of antenna.

COMPARATIVE EVALUATION OF EFFECT OF TWO LIGHT CURING UNITS ON MECHANICAL PROPERTIES OF FILTEK BULK FILL COMPOSITE

Context:The quality of light curing units can profoundly influence mechanical properties of dental composite materials. Aim: To compare effect of Woodpecker RTA Mini-S and Elipar Deep Cure-L curing units onmechanical properties (compressive strength, diametral tensile strength and microhardness) of Filtek Bulk-Fill. Methods and Materials: A total of 32 samples of Filtek Bulk Fill composite were divided into 2 equal groups (n=16). 12 samples in each group were fabricated using a tooth shaped mold and 4 in circular rings to test compressive strength, microhardness and diametral tensile strength, respectively. Theblocks were evaluated for the above parameters using Universal Testing Machine and Vickers Microhardness Tester.Independent sample-t test was used in this study (p< 0.05). Results: The results of this study showed that the group of composites cured using Elipar Deep Cure-L curing unit showed better mechanical properties and the difference between the groups was statistically significant for compressive strength and diametral tensile strength (p < 0.05) Conclusion: It was concluded that a curing unit of higher intensity and quality of output used in conjugation with bulk fill composites are likely to give better results.

Optimization of a Coherent Dual-Beam Array Feed Network for Aperiodic Concentric Ring Antennas

A dual-beam coherent feeding system design approach with a non-uniform layout on a concentric ring array is described and synthesized. In this case, the feeding system is based on a reconfigurable topology composed of a set of alternated power dividers and combiners, providing coherent in-phase outputs. Thus, in this paper, a two-beam architecture based on a coherent feeding system formed by a set of intercalated input signals feeding each circular ring in a non-uniform antenna array with multi-beam shaping and steering features is analyzed. The task of optimizing the aperiodic layout on the shared aperture based on the radii of the circular rings is realized by the differential evolution method. Numerical experiments grounded in antenna synthesis validate the capabilities and improved performance of the proposed dual-beam configuration with a non-uniform layout in contrast with its uniform counterpart, with enhanced performance on average by up to −6.1 dB for sidelobe level and 3.5 dB for directivity. Additionally, the results show a significantly less complex two-beam feeding network in contrast with the case of a typical electronically scanned array—in this proposal, each direction of maximum radiation is conformed and scanned with approximately half of the control inputs.