AlGaN/GaN MIS-HEMT with PECVD SiNx, SiON, SiO2 as Gate Dielectric and Passivation Layer

Three different insulator layers SiNx, SiON, and SiO2 were used as a gate dielectric and passivation layer in AlGaN/GaN metal–insulator–semiconductor high-electron-mobility transistors (MIS-HEMT). The SiNx, SiON, and SiO2 were deposited by a plasma-enhanced chemical vapor deposition (PECVD) system. Great differences in the gate leakage current, breakdown voltage, interface traps, and current collapse were observed. The SiON MIS-HEMT exhibited the highest breakdown voltage and Ion/Ioff ratio. The SiNx MIS-HEMT performed well in current collapse but exhibited the highest gate leakage current density. The SiO2 MIS-HEMT possessed the lowest gate leakage current density but suffered from the early breakdown of the metal–insulator–semiconductor (MIS) diode. As for interface traps, the SiNx MIS-HEMT has the largest shallow trap density and the lowest deep trap density. The SiO2 MIS-HEMT has the largest deep trap density. The factors causing current collapse were confirmed by Photoluminescence (PL) spectra. Based on the direct current (DC) characteristics, SiNx and SiON both have advantages and disadvantages.

Enhanced Electrical Properties of Atomic Layer Deposited LaxAlyO Thin Films with Stress Relieved Preoxide Pretreatment

The impact of stress relieved preoxide (SRPO) interface engineering on the physical and electrical properties of LaxAlyO films was investigated. It was proved that the SRPO pretreatment has little influence on the surface morphology of LaxAlyO films and the chemical bond composition of LaxAlyO/Si interface. However, the SRPO pretreated MIS capacitor displayed obvious improvement in decreasing the amount of trapped oxide charges and interfacial traps. As a result, a reduction of more than one order of magnitude in the gate leakage current density was obtained. The breakdown field strength and TDDB reliability of the LaxAlyO film treated with SRPO were also enhanced.