Mitigating Hot Spot Problem in Wireless Sensor Networks using Political Optimizer Based Unequal Clustering Technique

Wireless Sensor Network (WSN) encompasses a set of wirelessly connected sensor nodes in the network for tracking and data gathering applications. The sensors in WSN are constrained in energy, memory, and processing capabilities. Despite the benefits of WSN, the sensors closer to the base station (BS) expels their energy faster. It suffers from hot spot issues and can be resolved by the use of unequal clustering techniques. In this aspect, this paper presents a political optimizer-based unequal clustering scheme (POUCS) for mitigating hot spot problems in WSN. The goal of the POUCS technique is to choose cluster heads (CHs) and determine unequal cluster sizes. The POUCS technique derives a fitness function involving different input parameters to minimize energy consumption and maximize the lifetime of the network. To showcase the enhanced performance of the POUCS technique, a comprehensive experimental analysis takes place, and the detailed comparison study reported the better performance of the POUCS technique over the recent techniques.

Unequal clustering algorithm with IDA* multi-hop routing to prevent hot spot problem in WSNs

Energy conservation techniques are considered as the primary means of lengthening the lifetime of Wireless Sensor Networks (WSNs). Clustering is a useful technique that achieves long-term operation of the network. Cluster heads that are near the base station are expected to die early because they are responsible for collecting data that comes from far away in addition to their own data, thereby leading to problem of hot spot in the WSN.This paper presents a new protocol that uses an unequal clustering algorithm with an IDA* routing method to address the hot spot problem. The base station divides the network into three levels of unequal sizes of clusters. The base station takes into consideration the energy level and the distance from the base station for cluster-head selection in each cluster. The cluster head will be changed based on the energy threshold for each cluster. The proposed method uses an IDA* algorithm for efficient multi-hop routing in the network. The uneven clustering algorithm reduces the energy consumption of the nodes, thereby minimising the hot spot problem. The obtained simulation results prove that our approach increases the load balancing, improves the stability and prolongs the network lifetime compared with other related approaches.<p> </p>

Type 2 Fuzzy Logic based Unequal Clustering algorithm for multi-hop wireless sensor networks

Wireless sensor network (WSN) is an integral part of IoT and Maximizing the network lifetime is a challenging task. Clustering is the most popular energy efficient technique which leads to increased lifetime stability and reduced energy consumption. Though clustering offers several advantages, it eventually raises the burden of CHs located in proximity to the Base Station (BS) in multi-hop data transmission which makes the CHs near BS die earlier than other CHs. This issue is termed as hot spot problem and unequal clustering protocols were introduced to handle it. Presently, some of the clustering protocols are developed using Type-2 Fuzzy Logic (T2FL) but none of them addresses hot spot problem. This paper presents a Type-2 Fuzzy Logic based Unequal Clustering Algorithm (T2FLUCA) for the elimination of hot spot problem and also for lifetime maximization of WSN. The proposed algorithm uses residual energy, distance to BS and node degree as input to T2FL to determine the probability of becoming CHs (PCH) and cluster size. For experimentation, T2FLUCA is tested on three different scenarios and the obtained results are compared with LEACH, TEEN, DEEC and EAUCF in terms of network lifetime, throughput and average energy consumption. The experimental results ensure that T2FLUCA outperforms state of art methods in a significant way.

Energy Efficient Clustering and Routing Algorithm for WSN

Background: This paper presents a novel Energy Efficient Clustering and Routing Algorithm (EECRA) for WSN. It is a clustering-based algorithm that minimizes energy dissipation in wireless sensor networks. The proposed algorithm takes into consideration energy conservation of the nodes through its inherent architecture and load balancing technique. In the proposed algorithm the role of inter-cluster transmission is not performed by gateways instead a chosen member node of respective cluster is responsible for data forwarding to another cluster or directly to the sink. Our algorithm eases out the load of the gateways by distributing the transmission load among chosen sensor node which acts as a relay node for inter-cluster communication for that round. Grievous simulations show that EECRA is better than PBCA and other algorithms in terms of energy consumption per round and network lifetime. Objective: The objective of this research lies in its inherent architecture and load balancing technique. The sole purpose of this clustering-based algorithm is that it minimizes energy dissipation in wireless sensor networks. Method: This algorithm is tested with 100 sensor nodes and 10 gateways deployed in the target area of 300m × 300m. The round assumed in this simulation is same as in LEACH. The performance metrics used for comparisons are (a) network lifetime of gateways and (b) energy consumption per round by gateways. Our algorithm gives superior result compared to LBC, EELBCA and PBCA. Fig 6 and Fig 7 shows the comparison between the algorithms. Results: The simulation was performed on MATLAB version R2012b. The performance of EECRA is compared with some existing algorithms like PBCA, EELBCA and LBCA. The comparative analysis shows that the proposed algorithm outperforms the other existing algorithms in terms of network lifetime and energy consumption. Conclusion: The novelty of this algorithm lies in the fact that the gateways are not responsible for inter-cluster forwarding, instead some sensor nodes are chosen in every cluster based on some cost function and they act as a relay node for data forwarding. Note the algorithm does not address the hot-spot problem. Our next endeavor will be to design an algorithm with consideration of hot-spot problem.

Novel Learning Algorithms for Efficient Mobile Sink Data Collection Using Reinforcement Learning in Wireless Sensor Network

Generally, wireless sensor network is a group of sensor nodes which is used to continuously monitor and record the various physical, environmental, and critical real time application data. Data traffic received by sink in WSN decreases the energy of nearby sensor nodes as compared to other sensor nodes. This problem is known as hot spot problem in wireless sensor network. In this research study, two novel algorithms are proposed based upon reinforcement learning to solve hot spot problem in wireless sensor network. The first proposed algorithm RLBCA, created cluster heads to reduce the energy consumption and save about 40% of battery power. In the second proposed algorithm ODMST, mobile sink is used to collect the data from cluster heads as per the demand/request generated from cluster heads. Here mobile sink is used to keep record of incoming request from cluster heads in a routing table and visits accordingly. These algorithms did not create the extra overhead on mobile sink and save the energy as well. Finally, the proposed algorithms are compared with existing algorithms like CLIQUE, TTDD, DBRkM, EPMS, RLLO, and RL-CRC to better prove this research study.