Finely dispersed salt particles morphometric properties obtained by carnallite solutions spray drying

Currently, there is no consensus on the salt caves aero ionic environment effects mechanism on the human body, however, there is physiotherapy a separate type, based on such exposure health-improving effect, known as speleotherapy. To recreate the salt cave environment aero ionic composition, a halo chamber is used. To reduce their cost, recreating the air environment methods by contacting flowing air means with carnallite rock finely dispersed powder and dry and wet aerosols generators have been developed. When implementing these methods, both the powder obtained directly by crushing the rock and the powder obtained by salt solutions evaporation drying can be used. The study aim is to reveal finely dispersed salt particles morphometric properties obtained by carnallite solutions spray drying based on different dispersion raw materials. It has been established fine salt particles those morphometric properties obtained by spray drying of carnallite solutions based on different dispersion raw materials differ in average size, sphericity factor, topography character and chemical composition. Particles formed by solution evaporation on the macro disperse raw materials (3-5 mm) basis have larger size, smaller fractional range, more compact shape and relief characterized by multifractality. At the same time, solution-based particles from macro disperse raw materials contain more impurities. Particles a distinguishing characteristic from solution-based lumpy raw materials is the potassium cluster distribution on the surface.

Evaluation of tribological characteristics of liquid lubricants with fullerene additives

The paper presents experimental studies of the tribological characteristics of liquid lubricants of various viscosity classes and various groups of operation when using fullerene additives. Tribological characteristics were evaluated on a four-ball friction machine according to GOST 9490. Assessment was subject to: wear rate and critical load, which characterize the anti-wear properties of the lubricant, as well as welding load and bully index, which characterize an anti-bully properties of the material. It is shown that the improvement of the wear index for all oils begins with the concentration 0,2 % masses, fullerenes in the lubricant and does not exceed the values 11,1 … 15 %. At a fullerene concentration less than 0,2 % masses, no positive effect is observed. Positive effect 11,8 … 17,4 % characteristic of the indicator – critical load that characterizes the range of performance of anti-wear additives. At the same time, an increase in the critical load begins with concentration 0,1 % masses, fullerenes in a lubricant and manifests itself most effectively at a concentration 0,2 % masses. Changes in the magnitude of the welding load during the experiments were not recorded, this allows us to conclude, that the addition of a finely dispersed fullerene powder in a liquid lubricant does not improve anti-bully properties, but is only an anti-wear additive. It is shown that the way to improve the tribological properties of lubricants by introducing a finely dispersed powder of fullerenes in base technical oils is ineffective. It is necessary to develop other, more technological methods and methods for introducing fullerene additives into technical lubricants.

Features of metallurgy waste mainly processing with account for raw material contrast

This work presents research studies of alumina-containing estimates formed during the production of aluminum on electrolyzers with self-burning anodes during technological operations at PJSC RUSAL Bratsk. Material from the territory of the electrolysis workshop, with a mark of ± 0, is a mixture of finely dispersed powder, 2.5 mm in size (on average 62.78% by weight) with pieces of material from 0.5 to 6 cm in size. , 26% by weight). As a result of the work, the particle size and chemical-metallurgical properties of an alumina-containing estimate were studied. During the research, the content of valuable components and impurities in the sample of various classes was determined. In the process of mineralogical analysis, two phases were identified in the products: dark, black-gray and light, grayish-white. It is proved that these phases have significant differences in the chemical composition of the feed. Spectroscopic studies showed significant differences in the colorimetric characteristics of the raw materials, which is a fundamental factor for the use of photometric separation. Based on preliminary studies on the separation of alumina-containing estimates by photometric separation, the fundamental possibility of purifying contaminated material from technological impurities has been established.

STUDY PARTICLE SIZE DISTRIBUTION OF ERODING POWDER LEAD BRONZES OBTAINED IN DISTILLED WATER

The article is devoted to the current problem of processing waste of conductive materials, in particular lead bronze, which accumulates in large quantities at enterprises. A promising method for processing any conductive material, characterized by wastelessness, ecological purity of the process, and low energy costs, is the method of electroerosive dispersion. The essence of the method of electroerosive dispersion is the destruction of current-conducting material as a result of local exposure to short-term electrical discharges between the electrodes. In the discharge zone, under high temperatures, heating, melting and partial evaporation of the material occurs, resulting in the formation of finely dispersed powder particles. At the same time, the electrical parameters of the installation will affect the productivity of the process for obtaining powder materials: the voltage at the electrodes, the capacitance of the discharge capacitors, and the repetition rate. The article presents the results of the analysis of particles of powdered lead bronze obtained by the method of electroerosive dispersion in distilled water from wastes, using the laser analyzer of particle sizes "Analysette 22 NanoTec". It has been experimentally established that the average particle size of powdered lead bronze is 9.73 μm, the arithmetic value is 9.731 μm. It was also found that the elongation coefficient (elongation) of particles with a size of 7.188 μm is 1.50.