PENGARUH TEMPERATUR TUANG TERHADAP POROSITAS, STUKTUR MIKRO DAN KEKERASAN DARI ALUMUNIUM RONGSOK VELG MENGGUNAKAN PENGECORAN EVAPORATIF

The second largest metal material used after steel is Aluminum and its alloys. Ranging from aircraft bodies, vehicles, engine components, ship components, to buildings and very diverse applications using aluminum alloys. Material for making alloy wheels for components in motors using one of the special aluminum alloy applications with regard to the strength and hardness of high-quality aluminum alloys. Industrial companies that make aluminum doors, including windows and frames, make aluminum shelves, storefronts and other products. Produce waste remnants of used aluminum which can be used as aluminum as the main material destination. To reduce the company's production costs, many of them use aluminium scrap as their main casting material. Casting uses a temperature of 650 ° C, 700 ° C, 750 ° C, 800 ° C including casting type evaporative or casting using Styrofoam. The missing styrofoam casting pattern is a casting that uses a pattern of material that can evaporate when exposed to molten metal heat. The casting temperature results can affect microstructure, hardness, porosity and structure.

Effect of casting and rolling process parameters on solidification welding line of magnesium alloy

Process of horizontal twin roll casting magnesium alloy was analyzed by numerical simulation. Taking solidification welding line in cast rolling area as research object, the characteristic change of solidification welding line caused by casting rolling temperature, casting rolling speed and roll heat transfer capacity and its influence on the forming process of casting rolling area were analyzed. The results show that increasing casting temperature, casting speed or reducing heat transfer capacity of roll can make solidification welding line shift to exit of casting rolling zone. Increasing casting temperature and casting speed will increase difference between middle and edge of the solidification welding line along casting direction. And heat distribution of whole slab is more uniform. However, effect of improving heat transfer capacity of roll is completely opposite. According to this, optimum process parameters of casting and rolling magnesium alloy with plate thickness of 6 mm are put forward to reduce probability of edge crack.

Heat transfer behavior in ultrahigh-speed continuous casting mold

The growth rate of the shell thickness in the funnel mold for ultrahigh-speed continuous casting of steel has a significant effect on the shell surface quality. By using the node temperature inheritance algorithm, a three-dimensional transient thermal conductivity model of the liquid steel solidification inside the mold was established, and the effects of casting temperature and speed on the heat transfer behavior of the thin slab were investigated. The results show that with an increase in the casting speed from 4.0 to 6.0 m·min−1, the maximum thickness of the shell at mold exit was reduced from 26 to 12.8 mm, and the maximum temperature of the slab surface at mold exit increased from 1,210 to 1,305°C. However, the increase of casting temperature from 1,550 to 1,560°C had little effect on the surface temperature and thickness of the slab shell.