Experimental Study on the Effect of Triangular Plate Barrier Height on Flow Velocity Distribution in Open Channels

Open and closed channel flow flows are distinct, the flow in the channels will constantly change. The flow will also be altered if the water level or flow velocity changes. It was found that employing the Pitot Tube Portable yielded findings identical to those calculated by other methods. A water transfer system is made up of natural or artificial structures via which water is moved from one site to another. The carrier building may be open or closed, depending on whether you want to utilize it as a shipping or receiving location. An open channel with a relatively narrow opening at the top is known as an open conduit. The speed data collection technique is carried out vertically, with a review point as illustrated above. The velocity of the flow was measured using a Pitot Tube Portable Automatic tool. The results are entered into the Froude number (fr) after each review point to determine the type of velocity flow at each Review point. The normal flow velocity distribution pattern emerges at the measurement sites of 450 cm, 500 cm, and 550 cm.

Improved Rectification and Osmotic Power in Polyelectrolyte-Filled Mesopores

Ample studies have shown the use of nanofluidics in the ionic diode and osmotic power generation, but similar ionic devices performed with large-sized mesopores are still poorly understood. In this study, we model and realize the mesoscale ionic diode and osmotic power generator, composed of an asymmetric cone-shaped mesopore with its narrow opening filled with a polyelectrolyte (PE) layer with high space charges. We show that, only when the space charge density of a PE layer is sufficiently large (>1×106 C/m3), the considered mesopore system is able to create an asymmetric ionic distributions in the pore and then rectify ionic current. As a result, the output osmotic power performance can be improved when the filled PE carries sufficiently high space charges. For example, the considered PE-filled mesopore system can show an amplification of the osmotic power of up to 35.1-fold, compared to the bare solid-state mesopore. The findings provide necessary information for the development of large-sized ionic diode and osmotic power harvesting device.

Volume Estimation Through Mental Simulation

Although mental simulation underlies many day-to-day judgments, we identified a new domain influenced by simulation: volume estimation. Previous research has identified various ways in which volume estimates are biased but typically has not presented a psychological process by which such judgments are made. Our simulation-informs-perception account proposes that people often estimate a container’s size by simulating filling it. First, this produces an orientation effect: The same container is judged larger when right side up than when upside down because of the greater ease of imagining filling an upright container. Second, we identified a cavern effect: Imagining pouring water through a narrow opening toward a relatively wide base produces a sense that the container is cavernous and large (compared with identically sized, wide-topped, narrow-based containers). By testing for and demonstrating the importance of simulation to these effects, we showed how complex perceptual judgments can be distorted by higher level cognitive influences even when they are necessarily informed by modularly processed perceptual input.

Molecular Dynamics Simulation of Methane and Carbon Dioxide Permeation Through A Layered Inorganic Membrane

Molecular dynamics simulations are performed to investigate the permeation and separation of methane and carbon dioxide mixture through a layered inorganic membrane at high temperature to circumvent carbon dioxide adsorption on membrane surface. The simulations show that a single layer membrane with narrow cylindrical-pore favors methane permeation over carbon dioxide. When a slit-space is present along with the cylindrical-pore in a layered inorganic membrane, the membrane can be tailored to favor carbon dioxide over methane. The comparison of the permeation rates obtained directly from simulation and those from Knudsen flow calculation highlights the prominence of molecular sieving mechanism in determining the permeation behaviors of methane and carbon dioxide through a narrow opening.

Diffusive escape through a narrow opening: new insights into a classic problem

We study the mean first exit time (Tε) of a particle diffusing in a circular or a spherical micro-domain with an impenetrable confining boundary containing a small escape window (EW) of an angular size ε.

Morphology and Inheritance of Double Floweredness in Catharanthus roseus

A double-flowered periwinkle [Catharanthus roseus (L.) G. Don.] mutant TYV1 was identified and the morphology and inheritance of the double-flowered phenotype was studied. TYV1 has an outer salverform whorl of petals and an additional inner funnel-shaped whorl of petals originating from the apex of the corolla. The apex of corolla tube forms a narrow opening. There are hairs under the opening at the apex. The stigma in this mutant is set below the anthers. The overlap between the top end of the pistil and bottom ends of anthers in TYV1 flowers at 1 to 2 days after anthesis is 0.56 ± 0.01 mm. TYV1 could be used as either the male or female parent in crossing. Self-pollinated TYV1 produced all double-flowered progeny compared with self-pollinated single-flowered cultivars Little Pinkie and Titan Burgundy, which produced all single-flowered progeny. F1 plants between TYV1 and ‘Little Pinkie’ or ‘Titan Burgundy’ were all single. Three F2 populations segregated into 3 single: 1 double ratio. Backcrossing F1 to seed parents also indicated that a double-flowered form was controlled by a recessive allele. A single dominant gene expressed in the homozygous or heterozygous state resulted in the single-flowered phenotype. All the young seedlings of self-pollinated TYV1 and double-flowered progeny had distorted leaves before the sixth pair of leaves emerged.

Highly efficient cyclosarin degradation mediated by a β-cyclodextrin derivative containing an oxime-derived substituent

The potential of appropriately substituted cyclodextrins to act as scavengers for neurotoxic organophosphonates under physiological conditions was evaluated. To this end, a series of derivatives containing substituents with an aldoxime or a ketoxime moiety along the narrow opening of the β-cyclodextrin cavity was synthesized, and the ability of these compounds to reduce the inhibitory effect of the neurotoxic organophosphonate cyclosarin on its key target, acetylcholinesterase, was assessed in vitro. All compounds exhibited a larger effect than native β-cyclodextrin, and characteristic differences were noted. These differences in activity were correlated with the structural and electronic parameters of the substituents. In addition, the relatively strong effect of the cyclodextrin derivatives on cyclosarin degradation and, in particular, the observed enantioselectivity are good indications that noncovalent interactions between the cyclodextrin ring and the substrate, presumably involving the inclusion of the cyclohexyl moiety of cyclosarin into the cyclodextrin cavity, contribute to the mode of action. Among the nine compounds investigated, one exhibited remarkable activity, completely preventing acetylcholinesterase inhibition by the (−)-enantiomer of cyclosarin within seconds under the conditions of the assay. Thus, these investigations demonstrate that decoration of cyclodextrins with appropriate substituents represents a promising approach for the development of scavengers able to detoxify highly toxic nerve agents.