Unconventionally Made-Cellular Glass Aggregate

Improving the original manufacturing process in microwave field of a cellular glass aggregate using a recipe containing colored consumed drinking bottle, calcium carbonate (CaCO3) as an expanding agent, sodium borate (borax) as a fluxing agent and sodium silicate (Na2SiO3) as a binder is shown in the work. The main adopted technological measures were the advanced mechanical processing of residual glass at a grain dimension below 100 μm and especially the use of a high electromagnetic wave susceptible ceramic tube with a wall thickness reduced from 3.5 to 2.5 mm for the protection of the pressed glass-based mixture against the aggressive effect of microwave field and, in the same time, to achieve a preponderantly direct heating with electromagnetic waves. Of the tested variants, a recipe with 1.6 % calcium carbonate, 6 % borax, 8 % sodium silicate and the rest residual glass was determined to be optimal. The cellular glass aggregate had the bulk density of 0.22 g/cm3, heat conductivity of 0.079 W/m·K and compression strength of 5.9 MPa. The specific consumption of energy was very low (0.71 kWh/kg) below the range of reported values of the industrial processes consumption (between 0.74-1.15 kWh/kg).

Review of Custom Grids for Updated Vehicles on VANET Simulators

VANET deployment and testing is time-consuming and costly. Simulation is a handy and less expensive alternative to real implementation as a workaround. It is required to develop accurate models in order to receive excellent results from a VANET simulation, which difficult operation owes to the complexity of the VANET infrastructure (for example, simulators have to model the navigation models and communication protocols). The network and navigation components, which are the building blocks of contemporary VANET simulators, are described in this section. Simulators are a useful tool for testing VANETs at a minimal cost and without endangering users. However, in order to be helpful and convey trustworthy findings, simulators must be able to simulate new technologies that enter the VANET and enable safety and security procedures. To put it another way, if simulation is a good tool for VANET development it should be enhanced. VANET simulators have been the subject of research since early 2010 [1-4]. They analyze the correctness of VANET's numerous tools like a navigation simulator and network simulator, as well as how these building blocks are connected. The introduction of new network technologies such as 5G, SDN, edge computing, and VANET research as a result of investments in autonomous cars is forcing VANET simulators to re-evaluate their support for these new capabilities. We present an updated evaluation of VANET simulators in this post, highlighting their key features and current support for emerging technologies.

Reducing GHG and NOx Pollutant Emissions by Hydrogen Burning with Technical Oxygen

Traditional Ghanaian furniture designs are known as an exhibition of the splendor and elegance of decorative objects or decorative ornaments that carry profound philosophical and sacred meanings. The features found in Ghana’s traditional Ghanaian design can be considered as objects for international players, with their own identity and not found elsewhere. This paper therefore seeks to identify and illuminate some of these Akan cultural objects in Ghana by referring to the Ashanti region. This paper also shows with examples how these design elements can be developed and maintained by integrating them into modern furniture and interior designs or as a straightforward or adaptive design.

THE The Heritage of Ghanaian Traditional Furniture Culture

Traditional Ghanaian furniture designs are known as an exhibition of the splendor and elegance of decorative objects or decorative ornaments that carry profound philosophical and sacred meanings. The features found in Ghana’s traditional Ghanaian design can be considered as objects for international players, with their own identity and not found elsewhere. This paper therefore seeks to identify and illuminate some of these Akan cultural objects in Ghana by referring to the Ashanti region. This paper also shows with examples how these design elements can be developed and maintained by integrating them into modern furniture and interior designs or as a straightforward or adaptive design.

Validation of the procedure: Quantification of the degradation index of Photovoltaic Grid Connection Systems

The results obtained from the validation of the procedure ‟Quantification of the degradation index of Photovoltaic Grid Connection Systems” are presented, using statistical parameters, which corroborate its accuracy, achieving a coefficient of determination of 0.9896, a percentage of the root of the mean square of the error RMSPE = 1.498% and a percentage of the mean absolute error MAPE = 1.15%, evidencing the precision of the procedure.

Granulated Expanded Glass Manufacturing Method Using Electromagnetic Waves

The paper presents experimental results obtained in the process of experimental manufacture in a microwave oven of lightweight granulated glass aggregates. The process was conducted to obtain the highest dimensional class (between 18-23 mm), the almost spherical shape of the aggregates being facilitated by cold processing of raw spherical pellets (between 11-15 mm) containing the powder mixture formed by glass waste, borax. calcium carbonate, aqueous sodium silicate solution and water addition and then rotation of the high electromagnetic wave susceptible ceramic crucible containing raw pellets during the heat treatment at temperatures between 822-835 ºC. In terms of quality, the expanded glass aggregate granules are almost similar to those manufactured in conventional rotary kilns heated by burning fuel, having the following characteristics: bulk density of 0.17 g/cm3, compressive strength of 2.2 MPa, thermal conductivity of 0.047 W/m·K, water absorption of 1 vol. % and pore size between 0.3-0.6 mm. The experimental product has not yet been tested as a raw material in the manufacture of some light weight concretes, but the use of similar granulated glass aggregates manufactured in the world confirms the ability of this aggregate type to produce light weight and energy efficient concretes for building construction.

Cellular Glass Manufactured by Microwave Irradiation of Residual Glass, Eggshell and Borax

The paper presents an improved method of manufacturing cellular glass using residual glass (91 %), sodium borate (5 %), eggshell waste (4 %) and added water (9 %). Compared to methods using eggshell as an expanding agent producing cellular glass with low compression strength, the technique adopted by the authors is original by the addition of sodium borate, which contributes to increasing the compression strength and the use of the unconventional electromagnetic wave heating method, which ensures very economical specific energy consumption. The optimal variant of cellular glass had the following characteristics: density of 0.40 g/cm3, porosity of 81 %, heat conductivity of 0.086 W/m·K, compression strength of 4.3 MPa and the cell dimension between 0.3-0.9 mm. The specific energy consumption of the process was 0.80 kWh/kg. The product has adequate features for using as a heat insulation material under conditions of quite high mechanical loading.

Granulated Expanded Glass Manufacturing Method Using Electromagnetic Waves

The paper presents experimental results obtained in the process of experimental manufacture in a microwave oven of lightweight granulated glass aggregates. The process was conducted to obtain the highest dimensional class (between 18-23 mm), the almost spherical shape of the aggregates being facilitated by cold processing of raw spherical pellets (between 11-15 mm) containing the powder mixture formed by glass waste, borax. calcium carbonate, aqueous sodium silicate solution and water addition and then rotation of the high electromagnetic wave susceptible ceramic crucible containing raw pellets during the heat treatment at temperatures between 822-835 ºC. In terms of quality, the expanded glass aggregate granules are almost similar to those manufactured in conventional rotary kilns heated by burning fuel, having the following characteristics: bulk density of 0.17 g/cm3, compressive strength of 2.2 MPa, thermal conductivity of 0.047 W/m·K, water absorption of 1 vol. % and pore size between 0.3-0.6 mm. The experimental product has not yet been tested as a raw material in the manufacture of some light weight concretes, but the use of similar granulated glass aggregates manufactured in the world confirms the ability of this aggregate type to produce light weight and energy efficient concretes for building construction.

The Bioassay Guided Screening of Cryptolepis Extracts for Onward Synthesis of Nano Ferrites

In this study, various leaves and stem organic extracts were prepared using the solvents viz., n-hexane, ethyl acetate, ethanol and water, separately. Different phytochemical test for alkaloids, carbohydrates, oils, amino acids and others were performed to determine their presence in the extracts. These plant extracts were used for screening of sample via UV and HPLC techniques to compare the wavelength and absorbance, and retention time on chromatogram by extracts, respectively. The surface properties and size of nickel-zinc nano ferrites were evaluated by Energy-dispersive X-ray spectroscopy (EDX) and Scanning Electron Microscopy (SEM). The former, showed the presence of nickel (Ni) and zinc (Zn) weighing 4.27⁒ of N ,6.89⁒ of C and 35.5⁒ of O in the sample which confirmed the presence of nano ferrites in leaves and stem of C. buchanani.

Smart Visualization for Online Aids Image Retrieval

Visual aids can be considered as a motivational tool in enhancing students’ attention and create positive perceptions. The use of new technologies has opened new possibilities to integrate online visual aids in the teaching process, which produce positive learning effects. In this paper, a novel technique employed to retrieve specific images based on the kind of query classification. The semantic dictionary built based on the specific classification correlate with the query intention. Singular Value Decomposition SVD training technique have been used to select the effective key templates in order to link the query with the web annotation directly. The present method can be considered as a strategic tool in the E-learning technique, which can provide variety of clustered images to help the students in creative and critical thinking skills and prevent the indoctrination method in learning the students. The qualitative results achieved high True Positive (TP) retrieved images that respect to the effectiveness of the E-learning task. Also, it provides a good 92% of learning reaction and superior learning behavior level.