The Role of Organometallic Complexes in the Synthesis of Shaped Carbon Materials

Author(s):  
Neil J. Coville ◽  
Edward N. Nxumalo
1996 ◽  
Vol 454 ◽  
Author(s):  
Zakiyyah Smith ◽  
Michael Palmieri ◽  
Nancy Buecheler ◽  
Susan A. Jansen

AbstractHeteropoly acids, HPA are well known solid acid and oxidation catalysts that find application in hetergeneous and homogeneous reactions. In the former, surface area and stability problems are diminshed by supporting the HPA. Typical supports include oxide substrates and porous carbon materials. The HPA's show some instability on these supports however. In this work, we demonstrate that HPA encapsulated in sol-gel silica matrices show enhanced catalytic performance without compromising the catalytic activity of the HPA. In addition, the specific role of the support in the catalytic process is described as well.


2019 ◽  
Vol 59 ◽  
pp. 112-125
Author(s):  
Volodymyr Boichuk ◽  
Volodymyr Kotsyubynsky ◽  
Andrii Kachmar ◽  
Sergiy Budzulyak ◽  
Ivan Budzulyak ◽  
...  

The electrochemical properties of the nitrogen-enriched carbons obtained by plant raw treatment as electrode material for supercapacitors were investigated by electrochemical impedance spectroscopy, cycling voltammetry and galvanostatic charge-discharge cycling in KOH aqueous electrolyte. The effect of activation agent (NaOH) concentration and carbonization temperature were analyzed. The separation of double layer and redox capacitance components was done. The dominating role of microporosity for capacitive properties was demonstrated. The capacitance of model capacitors based on carbons obtained at different modes was calculated from both from cycling voltammetry and galvanostatic charge-discharge data. The maximal values of specific capacitance of carbon materials carbonized at 600°C and 900°C are about 100 and 120 F/g, respectively.


2020 ◽  
Vol 267 ◽  
pp. 118701 ◽  
Author(s):  
Shanshan Yang ◽  
Xiaodi Duan ◽  
Junqin Liu ◽  
Pingxiao Wu ◽  
Chunquan Li ◽  
...  
Keyword(s):  

2020 ◽  
Vol 357 ◽  
pp. 46-55 ◽  
Author(s):  
Marta A. Andrade ◽  
Ana S. Mestre ◽  
Ana P. Carvalho ◽  
Armando J.L. Pombeiro ◽  
Luísa M.D.R.S. Martins

Chemosensors ◽  
2020 ◽  
Vol 8 (4) ◽  
pp. 96
Author(s):  
Gennady Evtugyn ◽  
Anna Porfireva ◽  
Rezeda Shamagsumova ◽  
Tibor Hianik

Carbon nanomaterials offer unique opportunities for the assembling of electrochemical aptasensors due to their high electroconductivity, redox activity, compatibility with biochemical receptors and broad possibilities of functionalization and combination with other auxiliary reagents. In this review, the progress in the development of electrochemical aptasensors based on carbon nanomaterials in 2016–2020 is considered with particular emphasis on the role of carbon materials in aptamer immobilization and signal generation. The synthesis and properties of carbon nanotubes, graphene materials, carbon nitride, carbon black particles and fullerene are described and their implementation in the electrochemical biosensors are summarized. Examples of electrochemical aptasensors are classified in accordance with the content of the surface layer and signal measurement mode. In conclusion, the drawbacks and future prospects of carbon nanomaterials’ application in electrochemical aptasensors are briefly discussed.


2020 ◽  
Vol 7 (8) ◽  
pp. 192248
Author(s):  
Longhua Zou ◽  
Ping Yan ◽  
Peng Lu ◽  
Dongyao Chen ◽  
Wei Chu ◽  
...  

Carbon materials doped with nitrogen have long been used for SO 2 removal from flue gases for the benefits of the environment. The role of water is generally regarded as hydration of SO 3 which is formed through the oxidization of SO 2 . However, the hydration of SO 2 , especially on the surface of N-doped carbon materials, was almost ignored. In this study, the hydration of SO 2 was investigated in detail on the pyridinic nitrogen (PyN)-doped graphene (GP) surfaces. It is found that, compared with the homogeneous hydration of SO 2 assisted with NH 3 in gas phase, the heterogeneous hydration is much more thermodynamically and kinetically favourable. Specifically, when a single H 2 O molecule is involved, the energy barrier for SO 2 hydration is as low as 0.15 eV, with 0.59 eV released, indicating the hydration of SO 2 can occur at rather low water concentration and temperature. Thermodynamic integration molecular dynamics results show the feasibility of the hydrogenated substrate recovery and the immobilized N acting as a catalytic site for SO 2 hydration. Our findings show that the heterogeneous hydration of SO 2 should be universal and potentially uncover the puzzling reaction mechanism for SO 2 catalytic oxidation at low temperature by N-doped carbon materials.


2013 ◽  
Vol 67 (8) ◽  
Author(s):  
Gordana Ćirić-Marjanović ◽  
Igor Pašti ◽  
Nemanja Gavrilov ◽  
Aleksandra Janošević ◽  
Slavko Mentus

AbstractPolyaniline (PANI) and polypyrrole (PPY) undergo carbonisation in an inert/reduction atmosphere and vacuum, yielding different nitrogen-containing carbon materials. This contribution reviews various procedures for the carbonisation of PANI and PPY precursors, and the characteristics of obtained carbonised PANI (C-PANI) and carbonised PPY (C-PPY). Special attention is paid to the role of synthetic procedures in tailoring the formation of C-PANI and C-PPY nanostructures and nanocomposites. The review considers the importance of scanning and transmission electron microscopies, XPS, FTIR, Raman, NMR, and EPR spectroscopies, electrical conductivity and adsorption/desorption measurements, XRD, and elemental analyses in the characterisation of C-PANIs and C-PPYs. The application of C-PANI and C-PPY in various fields of modern technology is also reviewed.


Carbon ◽  
1998 ◽  
Vol 36 (3) ◽  
pp. 159-175 ◽  
Author(s):  
Francisco Rodríguez-reinoso

2007 ◽  
Vol 85 (2) ◽  
pp. 118-123 ◽  
Author(s):  
T Tsoncheva ◽  
S Vankova ◽  
O Bozhkov ◽  
D Mehandjiev

Bicomponent manganese and rhenium modified activated carbon materials, prepared by different methods, are studied and compared with the corresponding monocomponent materials as catalysts in methanol decomposition to CO and hydrogen. The best catalytic activity and stability is observed for the sample obtained by simultaneous deposition of Mn and Re precursors. The complex character of the catalytic active centre, including manganese and rhenium irons in various oxidative states, is discussed. The determining role of the Mn(II) ions in the improvement of the catalytic properties is assumed.Key words: rhenium, manganese, activated carbon, methanol decomposition.


Science ◽  
2017 ◽  
Vol 355 (6323) ◽  
pp. 380-385 ◽  
Author(s):  
Eric R. Welin ◽  
Chip Le ◽  
Daniela M. Arias-Rotondo ◽  
James K. McCusker ◽  
David W. C. MacMillan

Transition metal catalysis has traditionally relied on organometallic complexes that can cycle through a series of ground-state oxidation levels to achieve a series of discrete yet fundamental fragment-coupling steps. The viability of excited-state organometallic catalysis via direct photoexcitation has been demonstrated. Although the utility of triplet sensitization by energy transfer has long been known as a powerful activation mode in organic photochemistry, it is surprising to recognize that photosensitization mechanisms to access excited-state organometallic catalysts have lagged far behind. Here, we demonstrate excited-state organometallic catalysis via such an activation pathway: Energy transfer from an iridium sensitizer produces an excited-state nickel complex that couples aryl halides with carboxylic acids. Detailed mechanistic studies confirm the role of photosensitization via energy transfer.


Sign in / Sign up

Export Citation Format

Share Document