Carbonized Wood Decorated with Cobalt‐Nickel Binary Nanoparticles as a Low‐Cost and Efficient Electrode for Water Splitting

2021 ◽  
pp. 2010951
Author(s):  
Wentao Gan ◽  
Lianping Wu ◽  
Yaoxing Wang ◽  
He Gao ◽  
Likun Gao ◽  
...  
Keyword(s):  
Water Splitting ◽  
Low Cost ◽  
Cobalt Nickel ◽  
Carbonized Wood ◽  
Binary Nanoparticles

scholarly journals Wittichenite semiconductor of Cu3BiS3 films for efficient hydrogen evolution from solar driven photoelectrochemical water splitting

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Dingwang Huang ◽  
Lintao Li ◽  
Kang Wang ◽  
Yan Li ◽  
Kuang Feng ◽  
...  
Keyword(s):  
Hydrogen Evolution ◽  
Water Splitting ◽  
Low Cost ◽  
Solar Hydrogen ◽  
Onset Potential ◽  
Term Stability ◽  
Long Term Stability ◽  
Solar Water Splitting ◽  
Current Densities

AbstractA highly efficient, low-cost and environmentally friendly photocathode with long-term stability is the goal of practical solar hydrogen evolution applications. Here, we found that the Cu3BiS3 film-based photocathode meets the abovementioned requirements. The Cu3BiS3-based photocathode presents a remarkable onset potential over 0.9 VRHE with excellent photoelectrochemical current densities (~7 mA/cm2 under 0 VRHE) and appreciable 10-hour long-term stability in neutral water solutions. This high onset potential of the Cu3BiS3-based photocathode directly results in a good unbiased operating photocurrent of ~1.6 mA/cm2 assisted by the BiVO4 photoanode. A tandem device of Cu3BiS3-BiVO4 with an unbiased solar-to-hydrogen conversion efficiency of 2.04% is presented. This tandem device also presents high stability over 20 hours. Ultimately, a 5 × 5 cm2 large Cu3BiS3-BiVO4 tandem device module is fabricated for standalone overall solar water splitting with a long-term stability of 60 hours.

Electrodeposited Ni-Fe-P-FeMnO3/Fe multi-stage nanostructured electrocatalyst with superior catalytic performance for water splitting

2021 ◽  
Author(s):  
Xiao Tan ◽  
Xin Liu ◽  
Yingying Si ◽  
Zunhang Lv ◽  
Zihan Li ◽  
...  
Keyword(s):  
Water Splitting ◽  
Alkaline Solution ◽  
Low Cost ◽  
Catalytic Performance ◽  
Multi Stage

It is very important to design and prepare low-cost and efficiency electrocatalysts for water splitting in alkaline solution. In this works, Ni-Fe-P and Ni-Fe-P-FeMnO3 electrocatalysts are developed using facile electrodeposition...

scholarly journals Vanadium doped CaTiO3 cuboids: Role of vanadium in improving the photocatalytic activity

2021 ◽  
Author(s):  
Harsha Bantawal ◽  
Sandhya U. Shenoy ◽  
Denthaje Krishna Bhat
Keyword(s):  
Photocatalytic Activity ◽  
Water Splitting ◽  
Dye Degradation ◽  
Low Cost ◽  
Physicochemical Stability ◽  
Photocatalytic Dye Degradation

CaTiO3 has attracted enormous interest in the field of photocatalytic dye degradation and water splitting owing to its low cost, excellent physicochemical stability and structural tunability. Herein, we have developed...

scholarly journals Hydrogen production from water electrolysis: role of catalysts

2021 ◽  
Vol 8 (1) ◽  
Author(s):  
Shan Wang ◽  
Aolin Lu ◽  
Chuan-Jian Zhong
Keyword(s):  
Hydrogen Production ◽  
Water Splitting ◽  
Noble Metal ◽  
Active Sites ◽  
Current Knowledge ◽  
Low Cost ◽  
Critical Role ◽  
Water Electrolysis ◽  
Efficient Production ◽  
Production Of Hydrogen

AbstractAs a promising substitute for fossil fuels, hydrogen has emerged as a clean and renewable energy. A key challenge is the efficient production of hydrogen to meet the commercial-scale demand of hydrogen. Water splitting electrolysis is a promising pathway to achieve the efficient hydrogen production in terms of energy conversion and storage in which catalysis or electrocatalysis plays a critical role. The development of active, stable, and low-cost catalysts or electrocatalysts is an essential prerequisite for achieving the desired electrocatalytic hydrogen production from water splitting for practical use, which constitutes the central focus of this review. It will start with an introduction of the water splitting performance evaluation of various electrocatalysts in terms of activity, stability, and efficiency. This will be followed by outlining current knowledge on the two half-cell reactions, hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), in terms of reaction mechanisms in alkaline and acidic media. Recent advances in the design and preparation of nanostructured noble-metal and non-noble metal-based electrocatalysts will be discussed. New strategies and insights in exploring the synergistic structure, morphology, composition, and active sites of the nanostructured electrocatalysts for increasing the electrocatalytic activity and stability in HER and OER will be highlighted. Finally, future challenges and perspectives in the design of active and robust electrocatalysts for HER and OER towards efficient production of hydrogen from water splitting electrolysis will also be outlined.

scholarly journals Photocatalytic Overall Water Splitting by SrTiO3 with Surface Oxygen Vacancies

Nanomaterials ◽  
2020 ◽  
Vol 10 (12) ◽  
pp. 2572
Author(s):  
Yanfei Fan ◽  
Yan Liu ◽  
Hongyu Cui ◽  
Wen Wang ◽  
Qiaoyan Shang ◽  
...  
Keyword(s):  
Visible Light ◽  
Water Splitting ◽  
Oxygen Vacancies ◽  
Low Cost ◽  
Energy Levels ◽  
Light Response ◽  
Hydrogen Energy ◽  
Surface Oxygen ◽  
Carbon Reduction ◽  
Overall Water Splitting

Strontium Titanate has a typical perovskite structure with advantages of low cost and photochemical stability. However, the wide bandgap and rapid recombination of electrons and holes limited its application in photocatalysis. In this work, a SrTiO3 material with surface oxygen vacancies was synthesized via carbon reduction under a high temperature. It was successfully applied for photocatalytic overall water splitting to produce clean hydrogen energy under visible light irradiation without any sacrificial reagent for the first time. The photocatalytic overall water splitting ability of the as-prepared SrTiO3-C950 is attributed to the surface oxygen vacancies that can make suitable energy levels for visible light response, improving the separation and transfer efficiency of photogenerated carriers.

Static Electroplating of Iron Triad on Fastener Washers

2021 ◽  
Vol 879 ◽  
pp. 275-283
Author(s):  
Koay Mei Hyie ◽  
Salina Budin ◽  
Normariah Che Maideen ◽  
Yudi Rahmawan
Keyword(s):  
Carbon Steel ◽  
Low Cost ◽  
Sem Analysis ◽  
Nickel Iron ◽  
Cobalt Nickel ◽  
Protection Layer ◽  
And Performance ◽  
Resistant Layer ◽  
Corrosion Protection Coating ◽  
Protection Coating

Fasteners are commonly used in construction industry for parts joining purpose. There are many types of construction fasteners such as stud, bolt, anchor, nut, screw, and washer. The major problem of the fastener made by carbon steel is the poor resistance to corrosion. Electroplating is a simple yet low-cost tool to give a strong corrosion protection coating layer on the carbon steel. This study was performed to investigate the effect of current and deposition time on the iron triad (cobalt-nickel-iron) electroplating on the fastener washer. The experiment was conducted at 50 °C, pH 1-3 and at different electroplating time (30 minutes to 90 minutes) and current (0.2 A to 0.5 A). Burnt-out surface coating was observed on the fastener washer when the current was more than 0.4 A. A field test was carried out for 60 days to observe the corrosion behavior and performance of the products. Scanning electron microscope (SEM) analysis showed that a thin protection layer with 5.64 µm was formed at 60 minutes of electroplating time and 0.4 A of current. The surface roughness of the fastener washer was increased by increasing the electroplating time and current. The hardness was also improved with higher current and electroplating time if compared to the original fastener washer. The result of this study confirmed that a strong adhesive corrosion resistant layer to the fastener washer was using the current of 0.4 A (77 mA/cm2) and the electroplating time of 60 minutes.

Atomic Heterointerface Engineering Breaks Activity Limitation of Electrocatalysts and Promises Highly-Efficient Alkaline Water Splitting

2021 ◽  
Author(s):  
Qiucheng Xu ◽  
Jiahao Zhang ◽  
Haoxuan Zhang ◽  
Liyue Zhang ◽  
Ling Chen ◽  
...  
Keyword(s):  
Water Splitting ◽  
Anion Exchange ◽  
Low Cost ◽  
Water Electrolysis ◽  
Anion Exchange Membrane ◽  
Alkaline Water Electrolysis ◽  
Green Electricity ◽  
Alkaline Water ◽  
Highly Efficient ◽  
Exchange Membrane

Alkaline water splitting, especially the anion-exchange-membrane based water electrolysis, is an attractive way for low-cost and scalable H2 production. Green electricity-driven alkaline water electrolysis is requested to develop highly-efficient electrocatalysts...

Constructing oxygen vacancy-enriched Fe2O3@NiO heterojunctions for highly efficient electrocatalytic alkaline water splitting

CrystEngComm ◽  
2021 ◽  
Author(s):  
Yan Sang ◽  
Xi Cao ◽  
Gaofei Ding ◽  
Zixuan Guo ◽  
Yingying Xue ◽  
...  
Keyword(s):  
Oxygen Vacancy ◽  
Water Splitting ◽  
Oxygen Evolution ◽  
High Purity ◽  
Oxygen Evolution Reaction ◽  
High Efficiency ◽  
Low Cost ◽  
Dual Function ◽  
Alkaline Water ◽  
High Purity Hydrogen

Electrolysis of water to produce high-purity hydrogen is a very promising method. The development of green, high-efficiency, long-lasting and low-cost dual function electrocatalysts for oxygen evolution reaction (OER) and hydrogen...

Sign in / Sign up

Export Citation Format

Share Document