The fabrication of nanofibers with a mechanical force has attracted increasing attention owing to its facile and easy fabrication. Herein, we demonstrate a novel and facile fabrication technique with the mechanical force, needle spinning, which utilizes a needle tip to draw a polymer solution to form fibrous structures. We studied the effect of the processing parameters to the nanofiber structure, namely, the pulling away speed, pulling away distances, needle size, and polymer concentration, which were systemically controlled. As the needle spinning provides an effective route to adjust those parameters, highly uniform nanofibers can be achieved. There are clear tendencies in the diameter; it was increased as the polymer concentration and needle size were increased, and was decreased as the pulling away distance and pulling away speed were increased. Needle spinning with a precise control of the processing parameter enables us to readily fabricate well-defined nanofibers, with controlled dimensions in diameter and length; plus, single nanofibers also can be easily formed. Those features cannot be realized in common spinning process such as electrospinning. Therefore, this technique will lead to further development of the use of mechanical force for nanofiber fabrication and will expand the range of nanofibers applications.
Paper-based triboelectric nanogenerators and their applications: a review