Effect of drying method and wall material composition on the characteristics of camellia seed oil microcapsule powder

Author(s):  
Fei Song ◽  
Yannan Li ◽  
Bo Wang ◽  
Xiaojun Shen ◽  
Hui Wang ◽  
...  
Poljoprivreda ◽  
2019 ◽  
Vol 25 (1) ◽  
pp. 81-88 ◽  
Author(s):  
Mario Jakobović ◽  
Stela Jokić ◽  
Melita Lončarić ◽  
Snježana Jakobović ◽  
Krunoslav Aladić ◽  
...  

Aim of this study was to monitor the influence of drying method (naturally and chamber drying) and different sample preparation on supercritical CO2 extraction of oil from three grape seed varieties (Graševina, Zweigelt, Cabernet Sauvignon). The highest oil content was obtained from naturally dried screened and washed seeds of red variety Cabernet Sauvignon (14.85%) and lowest from chamber dried screened seeds of white variety Graševina (7.67%). Peroxide value ranged from 0.36 to 1.77 mmol O2/kg oil, free fatty acids 0.28-8.0%, and insoluble impurities 0.05-0.28%. Determined fatty acids were palmitic (6.98-11.58%), stearic (3.82-6.59%), oleic (14.90-19.97%) and linoleic acid (61.82-71.96%) in oil obtained from naturally dried seeds and 6.84-8.68%, 4.12-5.73%, 15.10-20.18% and 67.88-70.76% in oil from chamber dried seeds, respectively. In defatted cakes after supercritical CO2 extraction, protein and fibre content ranged from 8.17 to 9.85% and 34.58 to 43.96%, respectively. According to ANOVA results, sample preparation and drying method had statistically significant influence on grape seed oil extraction.


LWT ◽  
2018 ◽  
Vol 91 ◽  
pp. 345-352 ◽  
Author(s):  
Ana Lúcia Fadini ◽  
Izabela Dutra Alvim ◽  
Isabela Porto Ribeiro ◽  
Lucas Geraldini Ruzene ◽  
Lidiane Bataglia da Silva ◽  
...  

2012 ◽  
Vol 554-556 ◽  
pp. 934-937
Author(s):  
Jian Yu ◽  
Xiang Hong Li ◽  
Yong Le Liu ◽  
Chi Ling Li

The objective of this work was to study the influence of some process conditions on the microencapsulation of Gualou seed oil by spray drying. The results showed that the best parameters of microencapsulation were as follows: the ratio of arabic gum to maltodextrin was 1:1, and that of core material to wall material was 2:3; and the total solids content was 25%. The optimum spray drying conditions were that the air temperature of inlet was 180 °C, and that of outlet was 80 °C; the homogenizing pressure was 35MPa. The maximum microencapsulation efficiency was 86±0.95%.


2012 ◽  
Vol 49 (1) ◽  
pp. 379-388 ◽  
Author(s):  
Mortaza Aghbashlo ◽  
Hossien Mobli ◽  
Ashkan Madadlou ◽  
Shahin Rafiee

2015 ◽  
Vol 03 (04) ◽  
pp. 30-37 ◽  
Author(s):  
Hadeil Omer Abdelgadir Ahmed ◽  
Chengming Wang

Sign in / Sign up

Export Citation Format

Share Document