Effect of dicumyl peroxide on biodegradable poly(lactic acid)/functionalized gum arabic based films

In this work, novel plasticizing biodegradable poly (lactic acid) (PLA) composites were prepared by melt blending of jute and tung oil anhydride (TOA), and the physical and mechanical properties of PLA/jute/TOA composites were tested and characterized. The impact strength of PLA/jute/TOA composites significantly increases with increasing the content of TOA. The SEM images of fracture surface of PLA/jute/TOA composites become rough after the incorporation of TOA. In addition, TOA changes the crystallization temperature and decomposition process of PLA/jute/TOA composites. With increasing the amount of TOA, the value of storage modulus (E′) of PLA/jute/TOA composites gradually increases. The complex viscosity (η*) values for all samples reduce obviously with increasing the frequency, which means that the pure PLA and PLA/jute/TOA composites is typical pseudoplastic fluid. This is attributed to the formation of crosslinking, which restricts the deformation of the composites.

Download Full-text

Electro-textile based wearable patch antenna on biodegradable poly lactic acid (PLA) plastic substrate for 2.45 GHz, ISM band applications

2014 International Conference on Emerging Technologies (ICET) ◽

10.1109/icet.2014.7021036 ◽

2014 ◽

Cited By ~ 7

Author(s):

Haroon ◽

S. Ullah ◽

J. A. Flint

Keyword(s):

Lactic Acid ◽

Patch Antenna ◽

Plastic Substrate ◽

Poly Lactic Acid ◽

Ism Band ◽

Biodegradable Poly

Download Full-text

Impact Toughness and Ductility Enhancement of Biodegradable Poly(lactic acid)/Poly(ε-caprolactone) Blends via Addition of Glycidyl Methacrylate

Advances in Materials Science and Engineering ◽

10.1155/2013/976373 ◽

2013 ◽

Vol 2013 ◽

pp. 1-8 ◽

Cited By ~ 20

Author(s):

Wei Kit Chee ◽

Nor Azowa Ibrahim ◽

Norhazlin Zainuddin ◽

Mohd Faizal Abd Rahman ◽

Buong Woei Chieng

Keyword(s):

Lactic Acid ◽

Impact Strength ◽

Glycidyl Methacrylate ◽

Interfacial Adhesion ◽

Tensile Modulus ◽

Sem Analysis ◽

Poly Lactic Acid ◽

Biodegradable Poly ◽

Interfacial Compatibility ◽

The Impact

Poly(lactic acid) (PLA)/poly(ε-caprolactone) (PCL) blends were prepared via melt blending technique. Glycidyl methacrylate (GMA) was added as reactive compatibilizer to improve the interfacial adhesion between immiscible phases of PLA and PCL matrices. Tensile test revealed that optimum in elongation at break of approximately 327% achieved when GMA loading was up to 3wt%. Slight drop in tensile strength and tensile modulus at optimum ratio suggested that the blends were tuned to be deformable. Flexural studies showed slight drop in flexural strength and modulus when GMA wt% increases as a result of improved flexibility by finer dispersion of PCL in PLA matrix. Besides, incorporation of GMA in the blends remarkably improved the impact strength. Highest impact strength was achieved (160% compared to pure PLA/PCL blend) when GMA loading was up to 3 wt%. SEM analysis revealed improved interfacial adhesion between PLA/PCL blends in the presence of GMA. Finer dispersion and smooth surface of the specimens were noted as GMA loading increases, indicating that addition of GMA eventually improved the interfacial compatibility of the nonmiscible blend.

Download Full-text

Effects of synthesised polyaniline (PAni) contents on the anti-static properties of PAni-based polylactic acid (PLA) films

RSC Advances ◽

10.1039/d0ra07076a ◽

2020 ◽

Vol 10 (65) ◽

pp. 39693-39699

Author(s):

Pei-Yi Wong ◽

Sook-Wai Phang ◽

Azizah Baharum

Keyword(s):

Lactic Acid ◽

Polymer Film ◽

Polylactic Acid ◽

Poly Lactic Acid ◽

Static Properties ◽

Biodegradable Poly

An anti-static polymer film was prepared using biodegradable poly(lactic acid) as a matrix and polyaniline (PAni) as an anti-static agent to eliminate accumulated static charges.

Download Full-text