scholarly journals Effectiveness of point‐of‐use/point‐of‐entry systems to remove per‐ and polyfluoroalkyl substances from drinking water

2019 ◽  
Vol 1 (2) ◽  
pp. e1131 ◽  
Author(s):  
Craig Patterson ◽  
Jonathan Burkhardt ◽  
Donald Schupp ◽  
E. Radha Krishnan ◽  
Stephen Dyment ◽  
...  
2018 ◽  
Author(s):  
Benjamin W. Lykins ◽  
Robert M. Clark ◽  
James A. Goodrich

2013 ◽  
Vol 49 (2) ◽  
pp. 104-113
Author(s):  
Mohamed A. Hamouda ◽  
William B. Anderson ◽  
Peter M. Huck

Point-of-use (POU) and point-of-entry (POE) devices are, in some situations, considered to be a viable solution for drinking water suppliers and consumers alike to deal with site specific drinking water issues. This paper introduces a newly developed decision support system (DSS) that employs decision making techniques to select among the various devices based on their characterization and sustainability assessment. Careful illustration of the various aspects and components of the DSS is provided and the decision process is explained. Aspects of validity, usability and sensitivity analysis are demonstrated through a hypothetical case study for removing lead introduced in the distribution system of municipally treated drinking water. The output of the DSS helps to determine the more sustainable treatment devices which should have positive implications for the application of POU and POE devices. Other potential uses of the DSS are described to illustrate its versatility and usefulness. The DSS is not intended to replace common engineering practice in selecting POU and POE treatment systems, but rather to give support to the users by providing the necessary information about all possible solutions.


2021 ◽  
pp. 211-234
Author(s):  
Craig Patterson ◽  
Jonathan B. Burkhardt ◽  
Donald Schupp ◽  
E. Radha Krishnan ◽  
Stephen Dyment ◽  
...  

2002 ◽  
Vol 2 (5-6) ◽  
pp. 209-216
Author(s):  
R. Sublet ◽  
A. Boireau ◽  
V.X. Yang ◽  
M.-O. Simonnot ◽  
C. Autugelle

Two lead removal water filters were developed to lower lead levels in drinking water below 10 μg.L-1 in order to meet the new regulation given by the European Directive 98-83, applicable in December 2013. An appropriate adsorbent was selected through a stringent research program among a wide range of media, and is composed of a synthetic zeolite and an activated carbon. Two prototypes were developed: the first is a faucet-mounted filter which contains a fixed bed of the adsorbent and a hollow fiber bundle, while the second is an under-sink cartridge made of a porous extruded block of carbon and adsorbent. Both are able to treat at least 1,000 litres of any water containing on average 100 to 150 μg Pb.L-1, by lowering the lead concentration below 10 μg.L-1. Once their safety considerations were addressed by an independent laboratory according to the French Ministry of Health recommendations, 20 prototypes were installed at consumers' taps in northeastern France. Their performance in terms of lead removal, HPC control and bad taste and odor reduction was followed for 6 months. This field testing program resulted in the validation of both prototypes which meet the new French Ministry of Health recommendations and assures that the filtered water is fully ED 98-83 compliant. Their commercialization will be launched first in France in middle 2002.


1997 ◽  
Vol 35 (7) ◽  
pp. 243-250 ◽  
Author(s):  
Shigekazu Nakano ◽  
Tomoko Fukuhara ◽  
Masami Hiasa

It has been widely recognized that trihalomethanes (THMs) in drinking water pose a risk to human health. THMs can be removed to a certain extent by the conventional point-of-use (POU) unit which is composed of activated carbon (AC) and microfilter. But it's life on THMs is relatively shorter than on residual chlorine or musty odor. To extent the life of AC adsorber, pressure and thermal swing adsorption (PTSA) was applied by preferential regeneration of chloroform. PTSA was effective to remove THMs, especially chloroform. Adsorption isotherms of chloroform at 25 and 70°C showed a remarkable difference so that thermal swing was considered effective. Chloroform was also desorbed by reducing pressure. By vacuum heating at 70°C, chloroform was almost desorbed from AC and reversible adsorption was considered possible. A prototype of POU unit with PTSA was proposed. Regeneration mode would consist of dewatering, vacuum heating and cooling (backwashing). The unit was maintained in bacteriostatic condition and could be used for a long time without changing an AC cartridge.


2008 ◽  
Vol 42 (12) ◽  
pp. 4261-4267 ◽  
Author(s):  
Mark D. Sobsey ◽  
Christine E. Stauber ◽  
Lisa M. Casanova ◽  
Joseph M. Brown ◽  
Mark A. Elliott

Sign in / Sign up

Export Citation Format

Share Document