MECHANICAL BEHAVIOR OF PLANT TISSUES AS INFERRED FROM THE THEORY OF PRESSURIZED CELLULAR SOLIDS

1989 ◽  
Vol 76 (6) ◽  
pp. 929-937 ◽  
Author(s):  
Karl J. Niklas
Keyword(s):  
Mechanical Behavior ◽  
Plant Tissues ◽  
Cellular Solids

Mechanics of Wavy Network With Diamond-Shaped Inclusions

2017 ◽  
Author(s):  
Mona Monsef Khoshhesab ◽  
Yaning Li
Keyword(s):  
Mechanical Properties ◽  
Finite Element ◽  
Mechanical Behavior ◽  
Geometric Constraints ◽  
Cellular Solids ◽  
Biomedical Devices ◽  
Stress Strain ◽  
Engineering Applications ◽  
Smart Composites ◽  
Strain Behavior

In this investigation, mechanical behavior of periodic cellular solids with diamond-shaped inclusions connected via wavy network were explored. Two families of cellular solids within this category were designed based on two different geometric constraints. Auxetic effects and snap-through instability were observed for each family, respectively. The mechanical properties, including the stress-strain behavior, stiffness and Poisson’s ratio, were systematically quantified via finite element (FE) simulations. The parametric space for auxetic effects and snap-through instability was numerically identified. This study demonstrates the connection and transition between mechanical auxeticity and snap-through instability. The materials designed have potential engineering applications, such as lightweight supporting and protective foams, biomedical devices, smart composites or fabrics with switchable properties responsive to external environments.

Application of TEM to Deformation, Wear, and Fracture of Ceramics

1974 ◽  
Vol 32 ◽  
pp. 472-473
Author(s):  
B. J. Hockey
Keyword(s):  
Wear Resistance ◽  
High Temperature ◽  
Mechanical Behavior ◽  
Brittle Materials ◽  
High Temperature Strength ◽  
Wide Range ◽  
Corrosive Environments ◽  
Further Development

Ceramics, such as Al2O3 and SiC have numerous current and potential uses in applications where high temperature strength, hardness, and wear resistance are required often in corrosive environments. These materials are, however, highly anisotropic and brittle, so that their mechanical behavior is often unpredictable. The further development of these materials will require a better understanding of the basic mechanisms controlling deformation, wear, and fracture.The purpose of this talk is to describe applications of TEM to the study of the deformation, wear, and fracture of Al2O3. Similar studies are currently being conducted on SiC and the techniques involved should be applicable to a wide range of hard, brittle materials.

Microscopy studies of powdery mildew on summer squash

1991 ◽  
Vol 49 ◽  
pp. 520-521
Author(s):  
John S. Gardner ◽  
W. M. Hess
Keyword(s):  
Powdery Mildew ◽  
Tip Growth ◽  
Hyphal Growth ◽  
Plant Tissues ◽  
Vegetative Hypha ◽  
Powdery Mildews ◽  
Summer Squash ◽  
Conidial Formation ◽  
Polar Tip Growth ◽  
Short Conidiophore

Powdery mildews are characterized by the appearance of spots or patches of a white to grayish, powdery, mildewy growth on plant tissues, entire leaves or other organs. Ervsiphe cichoracearum, the powdery mildew of cucurbits is among the most serious parasites, and the most common. The conidia are formed similar to the process described for Ervsiphe graminis by Cole and Samson. Theconidial chains mature basipetally from a short, conidiophore mother-cell at the base of the fertile hypha which arises holoblastically from the conidiophore. During early development it probably elongates by polar-tip growth like a vegetative hypha. A septum forms just above the conidiophore apex. Additional septa develop in acropetal succession. However, the conidia of E. cichoracearum are more doliform than condia from E. graminis. The purpose of these investigations was to use scanning electron microscopy (SEM) to demonstrate the nature of hyphal growth and conidial formation of E. cichoracearum on field-grown squash leaves.

Localization of acid phosphatases in root cap of rice plant

1991 ◽  
Vol 49 ◽  
pp. 224-225
Author(s):  
Y. R. Chen ◽  
Y. F. Huang ◽  
W. S. Chen
Keyword(s):  
Rice Plant ◽  
Developmental Stages ◽  
Uranyl Acetate ◽  
Root Cap ◽  
Plant Tissues ◽  
Acid Phosphatases ◽  
Root Tips ◽  
Buffer Solution ◽  
Cacodylate Buffer ◽  
Ethanol Series

Acid phosphatases are widely distributed in different tisssues of various plants. Studies on subcellular localization of acid phosphatases show they might be present in cell wall, plasma lemma, mitochondria, plastid, vacuole and nucleus. However, their localization in rice cell varies with developmental stages of cells and plant tissues. In present study, acid phosphatases occurring in root cap are examined.Sliced root tips of ten-day-old rice(Oryza sativa) seedlings were fixed in 0.1M cacodylate buffer containing 2.5% glutaraldehyde for 2h, washed overnight in same buffer solution, incubated in Gomori's solution at 37° C for 90min, post-fixed in OsO4, dehydrated in ethanol series and finally embeded in Spurr's resin. Sections were doubly stained with uranyl acetate and lead citrate, and observed under Hitachi H-600 at 75 KV.

Cryosectioning plant roots prepared by high-pressure freezing

1987 ◽  
Vol 45 ◽  
pp. 662-663
Author(s):  
R.E. Crang ◽  
M. Mueller ◽  
K. Zierold
Keyword(s):  
High Pressure ◽  
Cell Walls ◽  
Plant Tissues ◽  
Ice Crystal ◽  
High Pressure Freezing ◽  
Vitreous State ◽  
Radial Depth ◽  
Irregular Topography ◽  
Considerable Depth ◽  
Conventional Freezing

Obtaining frozen-hydrated sections of plant tissues for electron microscopy and microanalysis has been considered difficult, if not impossible, due primarily to the considerable depth of effective freezing in the tissues which would be required. The greatest depth of vitreous freezing is generally considered to be only 15-20 μm in animal specimens. Plant cells are often much larger in diameter and, if several cells are required to be intact, ice crystal damage can be expected to be so severe as to prevent successful cryoultramicrotomy. The very nature of cell walls, intercellular air spaces, irregular topography, and large vacuoles often make it impractical to use immersion, metal-mirror, or jet freezing techniques for botanical material.However, it has been proposed that high-pressure freezing (HPF) may offer an alternative to the more conventional freezing techniques, inasmuch as non-cryoprotected specimens may be frozen in a vitreous, or near-vitreous state, to a radial depth of at least 0.5 mm.

The role of silicon in forages: A quantitative X-Ray study

1987 ◽  
Vol 45 ◽  
pp. 416-417
Author(s):  
Janet H. Woodward ◽  
D. E. Akin
Keyword(s):  
Sodium Acetate ◽  
Dry Matter ◽  
Acetate Buffer ◽  
Plant Tissues ◽  
Sodium Acetate Buffer ◽  
X Ray ◽  
Dry Matter Digestibility ◽  
Percent Composition

Silicon (Si) is distributed throughout plant tissues, but its role in forages has not been clarified. Although Si has been suggested as an antiquality factor which limits the digestibility of structural carbohydrates, other research indicates that its presence in plants does not affect digestibility. We employed x-ray microanalysis to evaluate Si as an antiquality factor at specific sites of two cultivars of bermuda grass (Cynodon dactvlon (L.) Pers.). “Coastal” and “Tifton-78” were chosen for this study because previous work in our lab has shown that, although these two grasses are similar ultrastructurally, they differ in in vitro dry matter digestibility and in percent composition of Si.Two millimeter leaf sections of Tifton-7 8 (Tift-7 8) and Coastal (CBG) were incubated for 72 hr in 2.5% (w/v) cellulase in 0.05 M sodium acetate buffer, pH 5.0. For controls, sections were incubated in the sodium acetate buffer or were not treated.

Sign in / Sign up

Export Citation Format

Share Document