Modeling and Numerical Studies of Three‐Dimensional Conically Shaped Microwells Using Non‐Uniform Photolithography

2022 ◽  
pp. 2100085
Author(s):  
Ahmad Ali Manzoor ◽  
Dae Kun Hwang
Keyword(s):  
Three Dimensional ◽  
Numerical Studies

scholarly journals Application of the erosion algorithm in modeling of structures behavior under impulse loads

2019 ◽  
Vol 221 ◽  
pp. 01003
Author(s):  
Pavel Radchenko ◽  
Stanislav Batuev ◽  
Andrey Radchenko
Keyword(s):  
Finite Element ◽  
High Velocity ◽  
Three Dimensional ◽  
Computer Software ◽  
Dynamic Loads ◽  
Complex Structures ◽  
Numerical Studies ◽  
Contact Surfaces ◽  
Fracture Of Materials ◽  
Solid Bodies

The paper presents results of applying approach to simulation of contact surfaces fracture under high velocity interaction of solid bodies. The algorithm of erosion -the algorithm of elements removing, of new surface building and of mass distribution after elements fracture at contact boundaries is consider. The results of coordinated experimental and numerical studies of fracture of materials under impact are given. Authors own finite element computer software program EFES, allowing to simulate a three-dimensional setting behavior of complex structures under dynamic loads, has been used for the calculations.

Experimental and numerical studies of bolted joints subjected to torsional excitation

2018 ◽  
Vol 32 (34n36) ◽  
pp. 1840083 ◽  
Author(s):  
Xuetong Liu ◽  
Jianhua Liu ◽  
Huajiang Ouyang ◽  
Zhenbing Cai ◽  
Jinfang Peng ◽  
...  
Keyword(s):  
Three Dimensional ◽  
Hysteresis Loops ◽  
Element Model ◽  
Bolted Joints ◽  
Torsional Angle ◽  
Numerical Studies ◽  
Dimensional Finite Element ◽  
Torsional Excitation ◽  
Three Dimensional Finite Element ◽  
Angular Amplitude

The dynamic response of bolted joints subjected to torsional excitation is investigated experimentally and numerically. First, the effects of the initial preload and the angular amplitude on axial force loss of the bolt were studied. Second, the change of hysteresis loops with the increasing number of loading cycles was found under a larger torsional angle. At last, a fine-meshed three-dimensional finite element model was built to simulate the bolted joint under torsional excitation, from which the hysteresis loops were obtained under varying angular amplitudes. The results of numerical analysis are in good agreement with those of experiments.

Analytical and Numerical Studies of Three-Dimensional Trajectories to the Moon

1960 ◽  
Vol 27 (8) ◽  
pp. 561-573 ◽  
Author(s):  
A. B. MICKELWAIT ◽  
R. C. BOOTON
Keyword(s):  
Three Dimensional ◽  
The Moon ◽  
Numerical Studies

A Three-Dimensional Pedestrian–Structure Interaction Model for General Applications

2018 ◽  
Vol 18 (09) ◽  
pp. 1850107 ◽  
Author(s):  
Yan-An Gao ◽  
Qing-Shan Yang ◽  
Yun Dong
Keyword(s):  
Large Scale ◽  
Damping Ratio ◽  
Three Dimensional ◽  
Interaction Model ◽  
Dynamic Interaction ◽  
Structure Interaction ◽  
Numerical Studies ◽  
Structure Dynamic ◽  
Proposed Model ◽  
Reaction Forces

A three-dimensional (3D) pedestrian–structure interaction (PSI) system based on the biomechanical bipedal model is presented for general applications. The pedestrian is modeled by a bipedal mobile system with one lump mass and two compliant legs, which comprise damping and spring elements. The continuous gaits of the pedestrian are maintained by a self-driven walking kinetic energy, which is a new driven mechanism for the mobile unit. This self-driven mechanism enables the pedestrian to operate at a varying total energy level, as an important component for further modeling of the crowd-structure dynamic interaction. Numerical studies show that the pedestrian walking on the structure leads to a reduction in the natural frequency, but an increase in the damping ratio of the structure. This model can also reproduce the reaction forces between the feet and structure, similar to those measured in the field. In addition, the proposed model can well describe the 3D pedestrian–structure dynamic interaction. It is recommended for use in further study of more complicated scenarios such as the dynamic interaction between a large scale kinetic crowd and slender footbridge.

The Effect of Concrete Containing Recycled Concrete Aggregate and Crushed Clay Bricks on Slab under Dynamic Loading

2014 ◽  
Vol 629-630 ◽  
pp. 330-336
Author(s):  
Mohammad Ali Yazdi ◽  
Saeid Motaghi ◽  
Jian Yang
Keyword(s):  
Three Dimensional ◽  
Blast Loading ◽  
Element Model ◽  
Recycled Concrete ◽  
Concrete Aggregate ◽  
Recycled Concrete Aggregate ◽  
Clay Bricks ◽  
Numerical Studies ◽  
Dimensional Finite Element ◽  
Three Dimensional Finite Element

This paper investigates a set of nonlinear numerical studies slab subjected to blast loading. A three-dimensional finite element model is developed using ABAQUS by emphasizing on using concrete with recycled concrete aggregate and crushed clay bricks (RCA and CCB) to promote the strength of slab against blast loading. Different charge weights of 0.2–0.55 kg equivalent weight of TNT at a 0.4 m standoff above the slabs were considered as variables in order to evaluate damage levels and define the relations among these variables with respect to the residual strength of slab after blast. The maximum deflection and spalling ratio of the specimens were verified with the experimental data. The results corroborate that using recycled concrete aggregate and crushed clay bricks improve the strength of slabs against blast loading. In addition, the best fraction of this type of materials has been illustrated.

Shape Memory Alloys: Material Modeling and Device Finite Element Simulations

2008 ◽  
Vol 583 ◽  
pp. 257-275 ◽  
Author(s):  
Ferdinando Auricchio ◽  
Alessandro Reali
Keyword(s):  
Finite Element ◽  
Shape Memory Alloys ◽  
Shape Memory ◽  
Biomedical Engineering ◽  
Three Dimensional ◽  
Material Modeling ◽  
Dimensional Model ◽  
Three Dimensional Model ◽  
Simulation Tools ◽  
Numerical Studies

The use of shape memory alloys (SMA) in an increasing number of applications in many ¯elds of engineering, such as biomedical engineering, is leading to a growing interest toward an exhaustive modeling of their macroscopic behavior in order to construct reliable simulation tools for SMA devices. In this paper we review a robust three-dimensional model able to reproduce both pseudo-elastic and shape-memory behaviors and we report numerical studies where it is used for the simulation of SMA-based biomedical devices.

Numerical Studies of Signal Amplification in a BaTiO3:Ce Crystal with an Applied Electric Field

1997 ◽  
Vol 06 (03) ◽  
pp. 349-360
Author(s):  
Ping Xie ◽  
Jian-Hua Dai ◽  
Peng-Ye Wang ◽  
Hong-Jun Zhang
Keyword(s):  
Electric Field ◽  
Input Signal ◽  
Applied Electric Field ◽  
Signal Amplification ◽  
Applied Field ◽  
Critical Role ◽  
Three Dimensional ◽  
Pump Intensity ◽  
Numerical Studies ◽  
Fanning Effect

The gain and the spatial fidelity of signal amplification in photorefractive BaTiO 3: Ce , with considerations of the effect of the externally applied electric field and the fanning effect (or noise), are numerically studied using a three-dimensional analysis. Although the gain of the signal can be enhanced with the applied field, its spatial fidelity is greatly reduced, especially at a small angle between the two propagation directions of the pump and signal beams. The fanning effect reduces the spatial fidelity, and the smaller the input signal to pump intensity ratio is, the smaller the fidelity becomes. At large magnitudes of the applied field, the applied field plays a critical role in the reduction of the fidelity of the signal and the fanning effect on the fidelity is negligible.

scholarly journals Universal amplitude ratios from numerical studies of the three-dimensional O(2) model

2002 ◽  
Vol 35 (31) ◽  
pp. 6517-6543 ◽  
Author(s):  
A Cucchieri ◽  
J Engels ◽  
S Holtmann ◽  
T Mendes ◽  
T Schulze
Keyword(s):  
Three Dimensional ◽  
Amplitude Ratios ◽  
Numerical Studies

scholarly journals Numerical Studies on Temperature and Material Flow During Friction Stir Welding using Different Tool Pin Profiles

2021 ◽  
Vol 83 (1) ◽  
pp. 91-104
Author(s):  
M. D. Bindu ◽  
P. S. Tide ◽  
A. B. Bhasi
Keyword(s):  
Friction Stir Welding ◽  
Temperature Distribution ◽  
Material Flow ◽  
Three Dimensional ◽  
Friction Stir ◽  
Specific Strength ◽  
Numerical Studies ◽  
Computational Fluid Dynamics Cfd ◽  
Tool Pin ◽  
Metal Hardness

A three dimensional computational fluid dynamics (CFD) model has been developed to study the effect of tool pin profile on the material flow and temperature development in friction stir welding (FSW) of high specific strength AA 7068 alloy. Numerical simulations were carried out using a RNG k-e turbulence model. Three tool pin profiles, viz. cylindrical, conical and straight cylindrical threaded were considered for the simulation. The temperature distribution and material flow pattern obtained from the simulation were compared for different pin profiles. Simulation results predicted Temperature distribution and material maxing was better in straight cylindrical tapered thread pin welds. Weld joints were fabricated using the straight cylindrical threaded pin with the same parametric combinations as in the simulation. Peak temperature measured in the experiment was less than that obtained by simulation. Hardness measurements taken at different weld regions has showed that about 71% of that of the base metal hardness is obtained with the threaded tool pin. The microstructure study revealed a defect free weld joint. Precipitates distributed in the microstructure indicate sufficient heat input to join the material without dissolving precipitates. The developed numerical model is helpful in optimising FSW process parameters.

Sign in / Sign up

Export Citation Format

Share Document