Interaction of Heavy Crude Oil and Nanoparticles for Heavy Oil Upgrading

Author(s):  
Rohan M. Jadhav ◽  
Jitendra S. Sangwai
Author(s):  
Antonio C. Bannwart ◽  
Oscar M. H. Rodriguez ◽  
Carlos H. M. de Carvalho ◽  
Isabela S. Wang ◽  
Rosa M. O. Vara

Abstract This paper is aimed to an experimental study on the flow patterns formed by heavy crude oil (488 mPa.s, 925.5 kg/m3 at 20 °C) and water inside vertical and horizontal 1 in. pipes. The interfacial tension was 29 dynes/cm. Effort is concentrated into flow pattern characterization, which was visually defined. The similarities with gas-liquid flow patterns are explored and the results are expressed in flow maps of the superficial velocities. In contrast with other studies, the annular flow pattern (‘core annular flow’) was observed in both horizontal and vertical test sections. In fact this flow pattern typically occurs in heavy oil-water flows at low water input fractions. Because of the practical importance of core flow in providing an effective means for heavy oil production and transportation, this paper discusses two criteria that favor its occurrence in pipes.


2004 ◽  
Vol 126 (3) ◽  
pp. 184-189 ◽  
Author(s):  
Antonio C. Bannwart ◽  
Oscar M. H. Rodriguez ◽  
Carlos H. M. de Carvalho ◽  
Isabela S. Wang ◽  
Rosa M. O. Vara

This paper is aimed to an experimental study on the flow patterns formed by heavy crude oil (initial viscosity and density 488 mPa s, 925.5kg/m3 at 20°C) and water inside vertical and horizontal 2.84-cm-i.d. pipes. The oil-water interfacial tension was 29 dyn/cm. Effort is concentrated into flow pattern characterization, which was visually defined. The similarities with gas-liquid flow patterns are explored and the results are expressed in flow maps. In contrast with other studies, the annular flow pattern (“core annular flow”) was observed in both horizontal and vertical test sections. These flow pattern tends to occur in heavy oil-water flows at low water input fractions. Because of the practical importance of core flow in providing an effective means for heavy oil production and transportation, this paper discusses criteria that favor its occurrence in pipes.


2020 ◽  
Vol 26 (6) ◽  
pp. 35-49
Author(s):  
Firas K. AL-Zuhairi ◽  
Rana Abbas Azeez ◽  
Muna Kheder Jassim

The increase globally fossil fuel consumption as it represents the main source of energy around the world, and the sources of heavy oil more than light, different techniques were used to reduce the viscosity and increase mobility of heavy crude oil. this study focusing on the experimental tests  and modeling with Back Feed Forward Artificial Neural Network (BFF-ANN) of the dilution technique to reduce a  heavy oil viscosity that was collected from the south- Iraq oil fields using organic solvents, organic diluents with different weight percentage  (5, 10 and  20 wt.% )  of  (n-heptane, toluene, and a mixture of  different ratio toluene / n-Heptane)  at constant temperature. Experimentally the higher viscosity reduction was about from 135.6 to 26.33 cP when the mixture of toluene/heptane (75/25 vol. %) was added. The input parameters for the model were solvent type, wt. % of solvent, RPM and shear rate, the results have been demonstrated that the proposed model has superior performance, where the obtained value of R was greater than 0.99 which confirms a good agreement between the correlation and experimental data, the predicate for reduced viscosity and DVR was with accuracy 98.7%, on the other hand, the μ and DVR% factors were closer to unity for the ANN model.


AMB Express ◽  
2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Arif Nissar Zargar ◽  
Ankur Kumar ◽  
Anurag Sinha ◽  
Manoj Kumar ◽  
Ioannis Skiadas ◽  
...  

AbstractGlobally, the reserves of heavy crude oil are seven times more abundant than that of light crude, and yet, they are underutilized because of their high viscosity and density, which is largely due to the presence of large amounts of asphaltenes. Biotransformation of heavy oil asphaltenes into smaller metabolites can be used for reducing their viscosity. Several microorganisms capable of asphaltene biodegradation have been reported but only few have been characterized for its biotransformation. In the present study, a 9-membered microbial consortium was isolated from an oil contaminated soil. About 72% and 75% asphaltene biotransformation was achieved by growing cells at shake flask level and in a 1.5 l bioreactor, respectively. A representative structure of asphaltene was constructed based on LC–MS, 1H-NMR, 13C-NMR, FT-IR, ICPMS and elemental analysis (CHNS) of n-heptane purified asphaltene from Maya crude oil. Biotransformation of asphaltene, as analyzed by performing 1H-NMR, FT-IR and elemental analysis, resulted in 80% decrease in S and N when compared to the control along with incorporation of oxygen in the structure of asphaltene. About 91% decrease in the viscosity of the Maya crude oil was observed after two weeks when oil: aqueous phase ratio was 1:9. The results suggest that the isolated microbial consortium can be used for biological upgradation of heavy crude oil. To our knowledge, this is the first report where a microbial consortium resulted in such high asphaltene biotransformation.


2021 ◽  
Author(s):  
Ewa Nowicka ◽  
Meenakshisundaram Sankar ◽  
Robert Jenkins ◽  
D. W. Knight ◽  
David J Willock ◽  
...  

Heavy crude oil fractions which form the residues from fractional distillation are a significant proportion of current hydrocarbon reserves. However, processing residues for use as chemicals or fuels is hampered...


Author(s):  
John M. Gerez ◽  
Archie R. Pick

More of the crude oil being produced in the world is heavy oil. It was reported by Meyer and Dietzman (1979) that world annual production of heavy crude oil was about five percent of other oil produced. They forecast that heavy crude oil production would increase. Canadian heavy oil production cumulative to 1979 was reported to be 197 million barrels. By 1996 Canadian daily production levels have risen to the levels shown in Table 1, with annual production of heavy oil and bitumen exceeding cumulative totals produced to 1979.


Author(s):  
Eliezer A. Reyes Molina ◽  
José G. Delgado-Linares ◽  
Antonio L. Cárdenas ◽  
Ana M. Forgiarini

Sign in / Sign up

Export Citation Format

Share Document