Analysis of Low Temperature Cracking Behavior at Binder, Mastic and Asphalt Concrete Levels

2021 ◽  
pp. 255-261
Author(s):  
Christiane Raab ◽  
Martin Arraigada ◽  
Hamza Ibrahimi
Keyword(s):  
Low Temperature ◽  
Asphalt Concrete ◽  
Cracking Behavior ◽  
Low Temperature Cracking

scholarly journals Influences by Air Voids on the Low-Temperature Cracking Property of Dense-Graded Asphalt Concrete Based on Micromechanical Modeling

2016 ◽  
Vol 2016 ◽  
pp. 1-10 ◽  
Author(s):  
Tao Ma ◽  
Yao Zhang ◽  
Hao Wang ◽  
Xiaoming Huang ◽  
Yongli Zhao
Keyword(s):  
Low Temperature ◽  
Asphalt Concrete ◽  
Three Dimensions ◽  
Micromechanical Modeling ◽  
Void Content ◽  
Cracking Behavior ◽  
Air Voids ◽  
Low Temperature Cracking ◽  
Air Void ◽  
Air Void Content

This study characterized the impacts of air voids on the low-temperature cracking behavior of dense-graded asphalt concrete. Virtual low-temperature bending beam test for dense-graded asphalt concrete was built and executed by discrete element method and PFC3D (particle flow code in three dimensions). Virtual tests were applied to analyze the impacts by content, distribution, and size of air voids on the low-temperature properties of dense-graded asphalt concrete. The results revealed that higher air void content results in worse low-temperature property of dense-graded asphalt concrete, especially when the air void content exceeds the designed air content; even with the same designed air void content, different distributing condition of air voids within asphalt concrete leads to different low-temperature properties of asphalt concrete, especially when the air void content in the central-lower part of testing sample varies. Bigger size of single air void which tends to form interconnected air voids within asphalt concrete has more harmful impacts on the low-temperature properties of asphalt concrete. Thus, to achieve satisfied low-temperature properties of dense-graded asphalt concrete, it is critical to ensure the designed air void content, improve the distribution of air voids, and reduce the interconnected air voids for dense-graded asphalt concrete.

Research on Basalt Fiber Asphalt Concrete's Low Temperature Performance

2014 ◽  
Vol 505-506 ◽  
pp. 35-38 ◽  
Author(s):  
Chun Mei Gao ◽  
Shuo Han ◽  
Shuang Chen ◽  
He Li
Keyword(s):  
Low Temperature ◽  
Asphalt Concrete ◽  
Failure Strain ◽  
Basalt Fiber ◽  
Test Method ◽  
Temperature Performance ◽  
Low Temperature Cracking ◽  
Indirect Tensile ◽  
Low Temperature Performance ◽  
Temperature Damage

Conduct experimental study on low temperature performance about asphalt concrete with 6mm basalt fiber and without basalt, 6mm fibers whose dosage is 0.12%0.15% and 0.17%, test method is the indirect tensile test,test temperature is-10±0.5°C. The results show that basalt fiber improved the strength and failure strain of asphalt concrete in low temperature damage, reduced the failure stiffness,in which the maximum increased value of breaking strength is 3.41%, the maximum increased value of failure strain is 38.83%,and the maximum reduced value of failure stiffness is 25.52%,obviously improved low temperature cracking resistance of asphalt concrete;for low temperature performance, the optimum amount of value about 6mm basalt fiber is 0.15% .

Low-Temperature Cracking Analysis of Asphalt Pavement

2013 ◽  
Vol 361-363 ◽  
pp. 1625-1628
Author(s):  
Zhao Sheng Li ◽  
Yi Qiu Tan
Keyword(s):  
Low Temperature ◽  
Asphalt Pavement ◽  
Average Particle Size ◽  
Asphalt Mixture ◽  
Average Particle ◽  
Aggregate Gradation ◽  
Cracking Behavior ◽  
Behavior Study ◽  
Low Temperature Cracking ◽  
Shrinkage Coefficient

Establish the mechanical model of asphalt pavement low-temperature cracking, analysis the factors leading to cracking. The factors such as shrinkage coefficient of asphalt pavementtemperature stresspavement structure combination forms and temperature contribution affect the asphalt pavement on cracking behavior. Study the effect of aggregate gradation type on asphalt mixture temperature shrinkage coefficient, analyze shows that in case of the same skeleton type, the smaller the average particle size of aggregate is, the larger low-temperature shrinkage deformation of mixture is; increasing the amount of coarse aggregate can form the dense structure of skeletonreduce the shrinkage coefficient at low temperature and improve the low-temperature crack resistance ability of asphalt mixture.

Prediction of Low-Temperature Cracking of Asphalt Concrete Mixtures with Thermal Stress Restrained Specimen Test Results

1996 ◽  
Vol 1545 (1) ◽  
pp. 50-58 ◽  
Author(s):  
Hannele K. Zubeck ◽  
Ted S. Vinson
Keyword(s):  
Thermal Stress ◽  
Low Temperature ◽  
Asphalt Concrete ◽  
Probabilistic Model ◽  
Deterministic Model ◽  
Crack Spacing ◽  
Test Results ◽  
Concrete Mixtures ◽  
Specimen Test ◽  
Low Temperature Cracking

A deterministic model and a probabilistic model were developed to predict low-temperature crack spacing as a function of time using thermal stress restrained specimen test results, pavement thickness and bulk density, pavement restraint conditions, and air temperature. The effect of aging on pavement properties was incorporated in the models by predicting the field aging with long-term oven aging treatment in the laboratory. The calculation of the crack spacing is based on the theory that the pavement slab cracks when the pavement temperature reaches the cracking temperature of the mixture and the slab is fully restrained. The deterministic model predicts crack spacing with time, whereas the probabilistic model predicts crack spacing and its variation with time and yields the reliability of the design with regard to a minimum acceptable crack spacing criterion defined by road authorities. The probabilistic model is recommended for use in predicting the low-temperature cracking of asphalt concrete mixtures.

Performances Research of Hybrid Fiber Reinforced Asphalt Concrete

2009 ◽  
Vol 614 ◽  
pp. 283-288
Author(s):  
Shao Peng Wu ◽  
Hong Bo Yue ◽  
Qun Shan Ye ◽  
Ling Pang
Keyword(s):  
Low Temperature ◽  
Asphalt Concrete ◽  
Cellulose Fiber ◽  
Asphalt Mixtures ◽  
Temperature Deformation ◽  
Integrated Analysis ◽  
Price Ratio ◽  
Fiber Reinforced ◽  
Hybrid Fiber ◽  
Low Temperature Cracking

A kind of hybrid fiber was added into asphalt mixtures with the purpose of gaining pavement material with higher performance-to-price ratio. The hybrid fiber was constitutive of cellulose fiber and polyester fiber in several different proportions. Superpave mix design procedure was used to prepare hybrid fiber reinforced asphalt mixtures. Different kinds of specimens were formed with optimum asphalt content. Prolonged rutting test was conducted for the investigation of pave pavement properties of asphalt concrete. Test results show that hybrid fiber reinforced asphalt mixtures have better high-temperature deformation resistance, when the proportion of cellulose fiber in hybrid fiber ranges from 20% to 60%. Three points blending test was used to evaluate the low-temperature cracking property. Data prove that hybrid fiber with property proportion is of benefit to low-temperature cracking resistance. Water sensitivity test and indirect tension fatigue test were also carried out. Asphalt concrete with fiber has much better water damage resistance than that without fiber. For asphalt mixtures containing hybrid fiber, the cycle numbers to failure increase with the proportion decreasing of cellulose fiber in hybrid fiber. Making integrated analysis, hybrid fiber reinforced asphalt concrete has high performance-to-price ratio, which is propitious to spread of fiber reinforced asphalt concrete.

Low Temperature Cracking Evaluation of Asphalt Rubber Mixtures Using Semi-Circular Bending Test

2011 ◽  
Vol 243-249 ◽  
pp. 4201-4206 ◽  
Author(s):  
Jing Hui Liu
Keyword(s):  
Low Temperature ◽  
Asphalt Concrete ◽  
Asphalt Mixtures ◽  
Bending Test ◽  
Asphalt Pavements ◽  
Dry Process ◽  
Wet Process ◽  
Asphalt Rubber ◽  
Scb Test ◽  
Low Temperature Cracking

Low temperature cracking is the main distress in asphalt pavements in winter. As asphalt rubber course is increasing, there is no standard method to characterize the resistance to cracking of asphalt rubber mixtures. This paper investigates the use of a Semi Circular Bend (SCB) test as a candidate for a low-temperature cracking specification. Based on the SCB test, this paper presents the findings of a laboratory study that aimed to evaluate the effects of recycled tire rubber on the Low temperature cracking properties of asphalt mixtures. Three mix types, a conventional hot-mix asphalt concrete, a dry process rubber modified asphalt concrete, and a wet process asphalt-rubber asphalt concrete, were included in the investigation. It is found that the asphalt mixtures produced by the wet process showed much better low temperature crack resistance, the binder effect modified by rubber was significant.

Low-Temperature Cracking and Aging Performance of Modified Asphalt Concrete Specimens

1998 ◽  
Vol 1630 (1) ◽  
pp. 77-86 ◽  
Author(s):  
Richard Fortier ◽  
Ted S. Vinson
Keyword(s):  
Low Temperature ◽  
Asphalt Concrete ◽  
Bending Beam Rheometer ◽  
Modified Asphalt ◽  
Acrylate Copolymer ◽  
Specimen Test ◽  
Low Temperature Cracking ◽  
Creep Stiffness ◽  
Rheometer Test ◽  
Aging Performance

The thermal stress restrained specimen test (TSRST) was used to evaluate the low-temperature cracking resistance and aging performance of modified asphalt concrete (AC) specimens. One aggregate, two asphalt cements (AAA-1 and AAB-1), five modifiers (latex polymer, ethylene acrylate copolymer, rubber powder, elastomer, and a blend of polypropylene and Kevlar fibers), and four 85°C oven aging levels (0, 5, 25, and 50 days) were considered. The results of the bending beam rheometer test (BBRT) on binders at −20°C showed that AAA-1 displayed a smaller creep stiffness than AAB-1. Only two modifiers increased the deflection and softness of AAB-1. The additives in AAA-1 did not improve its lowtemperature rheological behavior. These results served as the basis for comparison with those from the TSRST. The fracture strength and temperature of AC specimens are sensitive to asphalt type (4.11 MPa and −32.2°C for AAA-1, 3.28 MPa and −25.4°C for AAB-1) and degree of aging (from 4.11 to 2.04 MPa and from −32.2 to −21.2°C for AAA-1 for aging levels from 0 to 50 days at 85°C). Only one modifier in AAB-1 (among the two candidates identified with the BBRT) improved the low-temperature performance of the AC specimens. After 50 days of aging, no improvement was observed. The modified AAA-1 AC specimens displayed an optimum improvement in performance for aging levels of 25 and 50 days. Several modified AC specimens displayed a low-temperature failure without apparent fracture. This behavior would appear to be advantageous for the performance of pavements in cold regions.

scholarly journals Evaluation of Mechanical properties for polypropylene Modified Asphalt concrete Mixtures

2017 ◽  
Vol 5 (12) ◽  
pp. 7797-7801 ◽  
Author(s):  
Safaa Moubark ◽  
Farag Khodary ◽  
Ayman Othman
Keyword(s):  
Mechanical Properties ◽  
Low Temperature ◽  
Asphalt Concrete ◽  
Road Traffic ◽  
Modified Asphalt ◽  
Concrete Mixtures ◽  
Low Temperature Cracking ◽  
Asphalt Modification ◽  
Indirect Tensile ◽  
Polymer Modified Asphalt

It is noticeable that the increase of road traffic during the last two decades in addition to the insufficient degree of maintenance caused an accelerated deterioration of road structure. These roads show early signs of distress such as rutting, cracking, low temperature cracking, ageing and stripping. Heavier loads and higher traffic volume demand higher performance of pavement.  Excellent performance of pavement requires bitumen that is less susceptible to high temperature, rutting or low temperature cracking. Several additives are used to increase the performance of bitumen and the quality of the produced mixtures. Polymers are considered the most widely used additives in asphalt modification that give better performance. The performance of the Polymer-modified asphalt depends on the type and the level of modification the used polymer. The choice of modification level and t modification type depends on the physical properties of the polymer, and its compatibility with bitumen. The polymer can be loosely classified into two categories, Plastomers and Elastomers. The results indicated that, the addition of polypropylene generally improved the mechanical properties of the mixture regardless of the percentage of polymers that added and (PP) content of 5%. it can be noticed that  the performance of PP-modified asphalt mixtures is better  compared with unmodified asphalt concrete mixtures  modifier because it has the highest Marshall Stiffness, indirect tensile strength and unconfined compressive strength

Sign in / Sign up

Export Citation Format

Share Document